Orca Hardware Bachelor Collection, Round Cabinet Pull Knob, 1-1/4" Diameter

Orca rates the Bachelor Collection CK-15030 knob as residential. It's meant for kitchen cabinets, vanities, and drawers in homes and apartment units, not for commercial-duty cabinetry or public-facing millwork. For heavy-traffic commercial casework, look at a solid brass pull such as the Deltana SBP35 Modern Square Bar Pull, which Deltana describes as heavy-duty solid brass.

No. The CK-15030 is not ADA compliant. A round knob requires pinching and twisting to grip, which is why ADA-scoped work calls for a pull you can operate with a closed fist. If the cabinetry falls under an accessibility scope, specify a bar or handle style instead, such as the Emtek Bar Cabinet Pull from the Schaub Collection.

Not directly. The CK-15030 is a single-post knob, so it lands on one hole. If the doors and drawers are already drilled for a two-hole pull, you'd be patching and re-drilling every front. Keep the existing center-to-center spacing instead and choose a pull that matches it, for example the Trimco 553 Series drawer pull at 3 inch center-to-center, or the Trimco 562 Series which offers 3-1/2 inch, 4 inch, and 96mm spacings.

The Orca Bachelor Collection CK-15030 is a round knob, 1-1/4 inch diameter, that mounts on a single screw hole. If you want a bar profile on the same doors, the Emtek Bar Cabinet Pull in the Schaub Collection is a bar-form cabinet pull, and the Deltana SBP35 Modern Square Bar Pull is a square bar pull at 3-1/2 inch in solid brass. Both are two-hole center-to-center pulls, so the door or drawer front needs a second bore rather than the single hole a knob uses.

The Orca Bachelor CK-15030 is a surface-mounted round knob that projects off the door face. Where a projecting knob will not clear, the Schaub Sabre edge pulls are the alternative: the 10010 in solid brass at 3 inch center-to-center, the 10011 at 4 inch center-to-center, and the 10012 at 5 inch center-to-center. Edge pulls mount at the door or drawer edge instead of the face.

The Orca Bachelor CK-15030 knob is designated for residential application and is not ADA compliant. For institutional or commercial casework where a graspable pull is preferred over a knob, the Trimco 553 Series drawer pulls at 3 inch center-to-center and the Trimco 562 Series at 3-1/2 inch, 4 inch, and 96mm center-to-center are pull-form hardware, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch.

Five finishes on the CK-15030 round knob: Black, Oil-Rubbed Bronze, Polished Chrome, Satin Chrome, and Satin Nickel. That covers the usual kitchen and bath mixes, so if a unit turnover has satin nickel faucets or matte black fixtures already, there's a match without switching brands mid-job.

Zinc alloy, finished in one of five plated or coated colors. Zinc alloy cast knobs hold crisp detail and take plating well, which is what keeps a five-finish range consistent across a job. If a spec calls for solid brass instead, the Omnia 1970 and Omnia 1971 cabinet pulls are forged solid brass.

The Orca Bachelor CK-15030 is a plain round profile, 1-1/4 inch in diameter, offered in Black, Oil-Rubbed Bronze, Polished Chrome, Satin Chrome, and Satin Nickel. For a patterned or period look, the Emtek Art Deco Cabinet Pull and the Emtek Alexander Cabinet Pull, both in the Schaub Collection, are styled cabinet knob/pull designs rather than a plain round form.

The Orca Bachelor CK-15030 is a 1-1/4 inch round cabinet knob rated for residential use, sized for cabinet doors and drawer fronts rather than appliance panels. For an appliance front, the Schaub 79-8 Steamworks is an 8 inch cabinet pull with an appliance pull function, which gives the longer grip surface an appliance door normally takes.

The Orca Bachelor CK-15030 covers the knob positions at 1-1/4 inch diameter. For the drawer fronts in the same run, the Trimco 553 Series drawer pulls come at 3 inch center-to-center, and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center options, so you can pick the bore spacing that matches the existing drawer holes. The Emtek Select 8405 in the Schaub Collection is also offered in both knob and pull form if you want one collection across knobs and drawers.