Orca Hardware Blackcomb Collection, Square Cabinet Pull Knob, 25mm Diameter

The Blackcomb square knob measures 25mm in diameter, which is a small single-hole knob face. At that size it works for cabinet doors and smaller drawer fronts where you want a low-profile square grip rather than a wide horizontal pull. It is a knob, so it mounts on one screw hole rather than two centers.

Orca lists the Blackcomb square knob as a residential application, and it is not ADA compliant. For apartment-unit cabinetry it is fine, but if you are specifying hardware for a commercial casework package or a space where the pull has to be operable without tight grasping, a bar or edge pull is the safer specification.

Knobs on doors and pulls on drawers is the usual split. For a squared-off look next to the Blackcomb knob, the Deltana SBP35 is a modern square bar pull at 3-1/2 inches. If your drawer fronts are already drilled, match the existing center-to-center: Trimco 553 Series drawer pulls are 3 inch ctc, and the Trimco 562 Series comes in 3-1/2 inch, 4 inch, and 96mm ctc.

The Blackcomb CK-17025 is a knob and takes a single mounting point, so it will not cover an existing two-hole pattern. Trimco 553 Series drawer pulls are made for 3 inch center-to-center, and Trimco 562 Series covers 3-1/2 inch, 4 inch and 96mm centers, so measure the existing holes and pick the matching series. Omnia 1968/102 is a forged solid brass modern pull at 4 inch center-to-center if you want a brass option on that spacing.

Three finishes: Black, Rose Gold, and Satin Nickel. Satin Nickel is the easiest to match against existing brushed hardware in a kitchen; Black and Rose Gold are the accent options if you are refreshing a whole run of cabinets at once.

A 25mm knob like the Blackcomb takes one hole and gives a pinch grip, so it is the simpler drill and the cheaper standardization across a lot of doors. A bar pull spans two mounting centers and gives a full-hand grip, which matters on heavy drawers and appliance panels. If you want the pull version, the Deltana SBP35 Modern Square Bar Pull is 3-1/2 inches, and Schaub's 79-8 Steamworks is an 8 inch appliance pull.

The Blackcomb CK-17025 is designated for residential application and is built in zinc alloy. Where a heavier-duty part is wanted, Deltana SBP35 is described as heavy-duty in solid brass, and the Omnia 1969, 1970 and 1971 modern cabinet pulls are forged solid brass. Those are two-point pulls rather than knobs, so the door or drawer front boring changes with them.

No. The Schaub 10010, 10011 and 10012 Sabre parts are edge pulls, made to mount on the edge of a door or drawer front at 3 inch, 4 inch and 5 inch center-to-center respectively. The Orca Blackcomb CK-17025 is a face-mounted square knob at 25mm diameter. They serve different mounting locations and are not interchangeable in the same boring.

Yes. The CK-17025 square knob is catalogued in Orca's 17-Bachelor Collection, so if you are already running that series on other cabinets in the unit, this is the knob within it. Order by MPN CK-17025 and pick the finish.

The Blackcomb CK-17025 is a square-profile knob offered in Black, Rose Gold and Satin Nickel. For a different design language, Emtek's Schaub Collection includes the Art Deco cabinet pull and the Alexander cabinet pull, both catalogued as knob/pull items, and the Emtek Bar cabinet pull for a straight modern line. The Emtek 8405 Select is another Schaub Collection cabinet knob/pull option.

No. The SDC SP50 is a 50mm spindle used in door controls, not a cabinet fitting. The Orca Blackcomb CK-17025 is a 25mm square cabinet knob for cabinet doors and drawers. The millimetre figures describe unrelated dimensions on unrelated parts, so do not order the SP50 expecting cabinet hardware.