Orca Hardware CK-12001 T-Pull Bar, 2" Bar Width, Steel, Satin Nickel

No. The CK-12001 is not ADA compliant, so it should not be used where accessible-hardware operation is required. On accessible units, specify pull hardware that is called out as ADA compliant.

The Orca CK-12001 is a 12-Bar Pull series T-pull bar with a zinc alloy substrate, offered in Black, Oil-Rubbed Bronze, Satin Nickel and Stainless Steel. For a bar-profile pull in solid brass, the Deltana SBP35 is a Modern Square Bar Pull at 3-1/2 inch in heavy-duty solid brass, and the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing. Both are brass bodies rather than zinc alloy, so the feel and weight in hand differ from the CK-12001.

The Orca CK-12001 T-pull bar is designated for residential application. If the opening calls for a commercial-duty drawer pull, the Trimco 553 Series drawer pull at 3 inch center-to-center and the Trimco 562 Series, which offers 3-1/2 inch, 4 inch and 96mm center-to-center options, are the drawer pull families to look at instead.

The CK-12001 is a T-pull bar that stands off the face of the cabinet. Where a surface-mounted pull would foul an adjacent door, sliding panel or appliance, the Schaub Sabre edge pulls are the alternative: the 10010 in solid brass at 3 inch center-to-center, the 10011 at 4 inch center-to-center and the 10012 at 5 inch center-to-center. Edge pulls mount on the edge of the panel rather than the face.

Four finishes: Black, Oil-Rubbed Bronze, Satin Nickel, and Stainless Steel. If you are refinishing a whole kitchen or a unit turnover, that is the full range to match across cabinet doors and drawer fronts.

Pull only, no latching or locking mechanism. Its function is dummy/pull trim, meaning it mounts through the cabinet door or drawer front purely as a grip. You still need a catch, magnet, or soft-close mechanism to keep the door shut.

The CK-12001 is a T-pull bar with a 2 inch bar width that mounts on the face of the door or drawer and projects out for a full-hand grip. An edge pull mounts at the door edge and sits nearly flush, which suits tight galley runs and flat-panel looks; the Schaub Sabre edge pulls cover 3, 4, and 5 inch center-to-center in that style. Face-mounted bar pulls are the easier grab; edge pulls are the low-profile option.

Same modern bar look, different constructions: the Emtek Bar Cabinet Pull from the Schaub collection, the Deltana SBP35 modern square bar pull in solid brass, and the Omnia 1969, 1970, and 1971 modern pulls with 1-3/16, 1-1/4, and 1-3/16 inch projections respectively. Pick on material and projection, since projection sets how much knuckle clearance you get in front of the door.

The Orca CK-12001 is a 2 inch bar width T-pull intended for cabinet and drawer hardware in residential use. For a panel-front appliance, the Schaub 79-8 Steamworks is an 8 inch cabinet pull designated as an appliance pull, which is the longer grip length that appliance doors normally require.

The Orca CK-12001 is part of the 12-Bar Pull series in a plain bar profile. Emtek's Schaub Collection covers both directions: the Emtek Bar Cabinet Pull keeps the straight bar shape, while the Alexander and Art Deco cabinet pulls are patterned styles in the same cabinet knob/pull function. All three are cabinet pulls, so the difference is the profile and styling rather than the job the part does.

The Orca CK-12001 is a 2 inch bar width T-pull in zinc alloy. When the projection is what drives the selection, the Omnia modern cabinet pulls publish it: the 1969 and 1971 are forged solid brass with 1-3/16 inch projection, and the 1970 is forged solid brass with 1-1/4 inch projection. Those figures let you confirm clearance to an adjacent drawer or wall before ordering.

No. The Orca CK-12001 is a cabinet pull with a dummy/pull trim function, meaning it has no latching mechanism and serves only as a grip. The SDC SP50 is a 50mm spindle classified under door controls, a lock component rather than a cabinet pull. They are not interchangeable.