Pamex FS7P31 Lexington Single ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$213.30
$106.03
Pamex Pamex FS7P31 Lexington Single Cylinder Handleset Satin Nickel Finish FS7P31

Pamex FS7P31 Lexington Single Cylinder Handleset Satin Nickel Finish

(No reviews yet) Write a Review

Model: FS7P31

In Stock (leaves warehouse same day if ordered before 3pm ET)

$213.30
$106.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
SPECIFICATIONS

Door Prep.
Cross Bore: 2-1/8” , Edge: 1”
Center to Center: 5-1/2”
Interior Trim
FT3-Saturn knob interior trim standard
FTF-Baron knob interior trim for US11P & US19
(other options available)
Latch Backset
Deadbolt: 2-3/8” deadbolt standard
Handle: 2-3/8” plainlatch standard
(other options available)
Faceplate
1” x 2-1/4” round corner standard
(other options available)
Bolt
Deadbolt: 1” throw
Lever: 1/2” throw
Door Thickness
Fit 1-3/8” to 1-3/4” standard
(extension kit available for 1-3/4” to 2-1/4” door)
Cylinder
5-pin KW keyway solid brass cylinder standard
5-pin SC “C” keyway available
Strike Plate
Deadbolt: 2-1/4” x 1-3/4” full lip round corner standard
Handle: 2-1/4” x 1-3/4” full lip round corner standard
(other options available)
Handing
Specify handing when order lever interior trim
ANSI/BHMA
A 156.2 Grade 3

 

FUNCTIONS

Single Cylinder
Deadbolt operated by key outside and turn-piece inside. Latchbolt operated by thumb-piece outside and knob or lever inside.
Double Cylinder
Deadbolt operated by key on both sides. Latchbolt operated by thumb-piece outside and knob or lever inside.
Dummy
Handle and knob or lever act as pull only. No operation

 

Manufacturer Resources

Product Specs

Subcategory:
Residential Locksets
Standard Strike:
Deadbolt: FD9SP: 1-3/4"x2-1/4" full lip, round corner
Standard Latch:
Deadbolt: 1"x2-1/4" round corner, adjustable backset
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Handlesets
Keyed Function:
Single Cylinder
Commercial/Residential:
Residential
Keyed:
Yes
Lock Function:
Entry
Product Model:
FS7
Product Function:
Entry
Product Finish:
Satin Nickel
Door Thickness Range:
1-3/8" to 1-3/4"
Product Category:
Mechanical Locks
Product Substrate:
Zinc
Department:
Door Hardware

Pamex FS7P31 – Frequently Asked Questions

1) Will the Pamex FS7 Lexington handleset fit a 1-3/8 inch door, and what about a thicker 2 inch door?
The FS7 Lexington handleset covers 1-3/8 inch through 1-3/4 inch doors as standard, which handles most residential entry doors including older 1-3/8 inch units. Going thicker than that, an extension kit is available to take it out to 1-3/4 inch through 2-1/4 inch, so a heavy custom or insulated slab is still workable. If you are already spec'ing a thick door, Weslock's 1411 Traditionale colonial handleset covers 1-3/4 inch to 2-1/4 inch without an add-on kit.
2) What door prep does the Pamex Lexington FS7 handleset need, and will it drop into an existing bore?
Door prep is a 2-1/8 inch cross bore with a 1 inch edge bore, and the deadbolt and handle centers sit 5-1/2 inches apart. That 2-1/8 inch bore is the standard residential prep, so if you are pulling off an existing handleset the holes usually line up, but the 5-1/2 inch center-to-center is the number to check first because handlesets vary on that spacing. Both latch backsets are 2-3/8 inch standard, deadbolt and plainlatch, with other backsets available.
3) Will the Lexington handleset deadbolt latch into the strike plate already in my jamb?
The deadbolt throws a full 1 inch and ships with an FD9SP strike, 1-3/4 x 2-1/4 inch full lip with round corners. If your existing jamb has a 1-3/4 x 2-1/4 inch round corner strike mortised in, the new one drops straight into the same cutout. Square corner preps will need the corners chiseled or a square corner strike substituted, which is an available option. The handle latch throws 1/2 inch and uses the same 1-3/4 x 2-1/4 inch full lip round corner strike.
4) Single cylinder vs double cylinder handleset for a door with glass next to it, which one do I need?
Single cylinder is what the FS7 Lexington is: key on the outside, thumbturn on the inside, with the latchbolt run by the thumbpiece outside and the interior knob inside. That is the right choice for a solid door. If the door has sidelites or glass a burglar could break to reach the turn, a double cylinder version is keyed on both sides instead, which removes the turnpiece. Check your local egress code first, since many jurisdictions restrict double cylinder on a required exit door. A third option, dummy, is pull only with no latch or bolt operation, used on inactive leaves of a pair.
5) Can I get the Pamex Lexington handleset keyed alike to the Schlage or Kwikset locks already on my building?
The Lexington ships with a 5-pin solid brass cylinder in the KW keyway as standard, and a 5-pin SC "C" keyway is available. So if the rest of your doors run Kwikset keys, order it standard; if they run Schlage keys, specify the SC keyway version. Get that decision right at order time, because the keyway is what determines whether a locksmith can key the whole group to one key.
6) Is the Pamex FS7 handleset rated well enough for a rental property front door?
It carries ANSI/BHMA A156.2 Grade 3, which is the residential duty level, and the product is catalogued as residential entry hardware with a zinc body. For a single-family rental or a house door, that is the normal grade. For a multi-family entry or anything seeing heavy daily traffic, step up: the Master Lock HDLB Series single cylinder deadbolt handleset is Grade 2, as is the Schlage F60 Addison with the Accent lever, which also covers 1-3/8 to 1-3/4 inch doors.
7) Is the Pamex Lexington a mortise handleset or a bored one?
It is a bored handleset: separate deadbolt and latch bores, 2-1/8 inch cross bore with a 1 inch edge bore, spaced 5-1/2 inches center to center. That is a different prep from a mortise handleset, which needs a rectangular pocket routed into the door edge. If your door is already mortised, the Baldwin Estates 6542 Tremont entry mortise trim is available in single and double cylinder for 1-3/4 inch doors, and Emtek's brass mortise handlesets are another mortise-prep option. Do not order the Pamex expecting it to fill a mortise pocket.
8) What is the closest equivalent to the Pamex FS7 Lexington single cylinder handleset from another brand?
The Schlage Residential F60 Addison keyed entry handleset with Accent lever is the nearest match. Both are single cylinder keyed entry handlesets and both fit doors 1-3/8 inch to 1-3/4 inch thick, so an opening prepped for the Lexington takes the F60 Addison without changing the door. The Pamex FS7 Lexington carries an ANSI/BHMA A156.2 Grade 3 rating and the F60 Addison is Grade 2, so the two are built to different test levels.
9) Which single cylinder handleset should I use on a 2 inch thick door instead of the Pamex FS7 Lexington?
The Pamex FS7 Lexington fits 1-3/8 inch to 1-3/4 inch doors as standard, with an extension kit available for 1-3/4 inch to 2-1/4 inch doors. If you would rather have a handleset rated for the thicker door out of the box, the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob covers 1-3/8 inch to 2 inch, and the Weslock 1411 Traditionale Colonial handleset with Eleganti knob is a single cylinder unit for 1-3/4 inch to 2-1/4 inch doors.
10) What is the difference between the Pamex FS7 Lexington handleset and the Kwikset 687 Amador handleset?
The Kwikset 687AMD Amador single cylinder handleset is sold as exterior trim only, so it is the outside half of the assembly. The Pamex FS7 Lexington ships with interior trim as part of the set, with the FT3 Saturn knob standard and the FTF Baron knob for the US11P and US19 finishes. Both are Grade 3 single cylinder entry, but the Amador is specified for 1-3/4 inch doors while the FS7 Lexington covers 1-3/8 inch to 1-3/4 inch. The 687AMD is offered with SmartKey in the standard keyway and as the 687AMD SMC with an SC1 keyway.
11) Is the Baldwin Estates 6542 Tremont a drop-in substitute for the Pamex FS7 Lexington handleset?
No. The Baldwin Estates 6542 Tremont single cylinder entry is mortise trim, so it mounts to a mortise lock body in a pocketed door edge. The Pamex FS7 Lexington is a bored lockset with a 2-1/8 inch cross bore, 1 inch edge bore and 5-1/2 inch center to center spacing. The Tremont is also specified for a 1-3/4 inch door only. Baldwin's 6542 Tremont is offered in single cylinder and in a double cylinder version keyed both sides.
12) Do I have to specify handing when I order a Pamex Lexington handleset?
Handing only matters if you take lever interior trim. With the standard FT3 Saturn knob inside, there is no handing to call out. Order a lever instead and you must specify the hand of the door. The FTF Baron knob is the interior trim for US11P and US19 finishes, and other interior trim options exist beyond those two.
13) What comes with a Pamex Lexington handleset, and what else do I need to buy to finish the install?
You get the exterior handle with thumbpiece, the interior FT3 Saturn knob trim, a keyed deadbolt with a 1 inch throw and 2-3/8 inch adjustable backset latch, a 1 x 2-1/4 inch round corner faceplate, and the FD9SP full lip round corner strike for the deadbolt plus a matching strike for the handle latch. Nothing else is required for a standard 1-3/8 to 1-3/4 inch door with existing 2-1/8 inch bores. Two things you may need to add: the extension kit if the door is thicker than 1-3/4 inch, and lever interior trim if you do not want the knob.
14) I need a handleset that matches the Pamex Lexington but with no lock in it for a fixed inactive door - what do I order?
The Pamex FS7 Lexington is a keyed single cylinder unit, so for an inactive or dummy leaf you want a handleset built as a pull only. The Weslock 6695 Belmont dummy handleset with Impresa knob and the Weslock 2815 Hillcrest dummy handleset with New Heaven lever are both dummy function and fit 1-3/8 inch to 2 inch doors. Emtek also offers dummy mortise entrance handlesets in the 3002 Memphis, 3004 Hamilton, 3005 Melrose and 3006 Manhattan patterns if you want a brass trim look.
15) I want the handleset look on a door that does not need to lock - what do I use instead of the Pamex FS7 Lexington?
The Pamex FS7 Lexington is a keyed single cylinder entry set. For an opening that does not need a key, the Schlage Residential JE285 Barcelona style handleset with Seville lever is a non-keyed entry handleset, Grade 2, fitting 1-3/8 inch to 1-3/4 inch doors, which is the same door thickness range the FS7 Lexington covers as standard. The Yale BYRD256 CBARX pairs a key free touchscreen deadbolt with a Ridgefield passage handleset for 1-3/4 inch to 2-1/4 inch doors.
16) What is the difference between the Pamex FS7 Lexington handleset and an interconnected lock like the Schlage JI18/19?
The Pamex FS7 Lexington is a single cylinder handleset: the deadbolt is operated by key outside and turn-piece inside, and the latchbolt by thumb-piece outside and knob or lever inside. The Schlage Residential JI18/19 with Torino lever is an interconnected passage lock with a keyed deadbolt, so the inside lever retracts both bolts at once and the lever itself is passage function rather than a thumb-piece handle. The JI18/19 fits 1-3/8 inch to 1-3/4 inch doors and is Grade 2.
17) Are there solid brass handleset alternatives to the zinc Pamex FS7 Lexington?
The Pamex FS7 Lexington is a zinc substrate handleset with a solid brass cylinder. If you want a solid brass handleset body, Deltana offers the 803871B Hanover, the 815871 St. Ann and the 825871 Kingston, all entry function solid brass handlesets. The Deltana 810871 Montego handleset fits 1-3/8 inch to 2 inch doors, a wider range than the 1-3/8 inch to 1-3/4 inch the FS7 Lexington covers as standard.
18) I need a handleset with a knob inside rather than a lever - what are my options alongside the Pamex FS7 Lexington?
The Pamex FS7 Lexington comes with the FT3 Saturn knob as standard interior trim, and handing only needs to be specified when ordering lever interior trim. Other knob-interior handlesets in entrance function include the Baldwin Wesley handleset with Alcott knob and the Baldwin Wesley handleset with Carnaby knob, and the Weslock 2810 Hillcrest single cylinder handleset with Hudson knob for 1-3/8 inch to 2 inch doors.
19) What finish does the Pamex Lexington FS7P31 come in, and will it match my other satin nickel door hardware?
Satin nickel is the finish, and it is the only one this model is built in. Satin nickel pairs cleanly with brushed nickel and satin chrome trim on adjacent doors, though nickel and chrome do differ slightly in warmth up close. Note that if you were ordering a US11P or US19 finish instead, the interior trim changes to the FTF Baron knob rather than the standard FT3 Saturn.
How fast can I get the Pamex FS7P31 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pamex FS7P31 come with a warranty?
Absolutely. The Pamex FS7P31 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pamex FS7P31?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pamex FS7P31 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!