You may also like
Panduit Sta-Strap SST Series Releasable Cable Tie, Nylon 6.6
Model: PAN-SST
"Panduit Sta-Strap® SST Series Releasable Cable Tie, Nylon 6.6The Panduit Sta-Strap® SST Series is a family of releasable cable ties molded from natural Nylon 6.6, offered in Miniature, Intermediate,...
Panduit
Starting at
$20.36
Panduit Pan-Ty® SSM2S-C Sta-Strap Releasable Nylon 6.6 Marker Cable Tie
The Panduit Pan-Ty® SSM2S-C Sta-Strap® is a releasable flag/wrap marker cable tie engineered for labeling and bundling cable runs in professional installations. Molded from Nylon 6.6 (PA6.6) in a natural finish with a standard cross section, this family is available in 7" and 9" lengths to suit a range of bundle diameters. Every size delivers a minimum loop tensile strength of 50lb (222N) for secure, reliable bundle retention, and the tie is UL Recognized (File #E56854), UL 62275 Compliant (Type 1, 11), CE marked, and RoHS Compliant — making it a dependable choice for cable identification and management work.
Key Features
- Available Lengths: Offered in 7" and 9" sizes to match your bundle diameter and labeling needs.
- Durable Construction: Molded from Nylon 6.6 (PA6.6) for strength, flexibility, and long service life.
- Releasable Design: Flag/wrap marker style allows the strap to be reopened for relabeling without cutting the tie.
- Tensile Rating: Minimum loop tensile strength of 50lb (222N) for secure bundle retention across the size range.
- Temperature Range: Rated from -76°F to 185°F (-60°C to 85°C) for demanding indoor environments.
- Body Width: 0.18 in (4.6mm) standard cross section.
- Color: Natural finish for standard identification and marking applications.
- Minimum Bundle Diameter: 0.06 in (1.5mm) minimum for secure closure.
Certifications & Compliance
- CE Marked
- RoHS Compliant
- UL Recognized (File #E56854)
- UL 62275 Compliant (Type 1, 11)
Technical Specifications
- Maximum Operating Temperature (°F): 185
- Minimum Operating Temperature (°F): -76
- Maximum Operating Temperature (°C): 85
- Minimum Operating Temperature (°C): -60
- Minimum Installation Temperature (°F): -4
- Minimum Installation Temperature (°C): -20
- Minimum Loop Tensile Strength (lb): 50
- Minimum Loop Tensile Strength (N): 222
- Body Width (In.): 0.18
- Body Width (mm): 4.6
- Minimum Bundle Diameter (In.): 0.06
- Minimum Bundle Diameter (mm): 1.5
- For Use With: Cables
- Std. Pkg. UOM: Piece
- Pack Size: 1000
Typical Applications
- Cable and Wire Bundle Identification
- Data Center and Telecom Cabling
- Industrial Control Panel Wiring
- Indoor Electrical and Network Installations
Why Panduit?
Panduit's Pan-Ty® Sta-Strap® marker ties combine Nylon 6.6 construction with a releasable design for practical, reusable cable identification across both available lengths. Backed by UL Recognition, UL 62275 compliance, and RoHS compliance, this cable tie family delivers dependable, code-compliant performance for professional cable management and identification work.
Manufacturer Resources
Product Specs
- Maximum Operating Temperature (°F):
- 185
- Std. Pkg. UOM:
- Piece
- Body Width (In.):
- 0.18
- Lead Content Indicator:
- N
- Mercury Content Indicator:
- N
- Sub Brand:
- Sta-Strap®
- Minimum Installation Temperature (°F):
- -4
- Product Segment:
- IEI
- Minimum Loop Tensile Strength (N):
- 222
- Minimum Operating Temperature (°F):
- -76
- Min Order Qty:
- 500.0000
- Minimum Loop Tensile Strength (lb):
- 50
- For Use With:
- Cables
- Minimum Bundle Diameter (In.):
- 0.06
- UOM EA PK:
- PK
- Minimum Bundle Diameter (mm):
- 1.5
- Any Reason Not to Sell:
- N
- REACH Status:
- N
- California Pro65 Cancer:
- No
- Application:
- Indoor
- Country of Origin:
- Singapore
- Product Type:
- Cable Tie
- Pallet Quantity:
- 60,000
- Minimum Operating Temperature (°C):
- -60
- RoHS Compliant:
- Compliant
- Min. Order UOM:
- Piece
- ARRA Compliant:
- Y
- Maximum Operating Temperature (°C):
- 85
- Environment:
- Indoor
- Hazardous Material Flag:
- N
- Restricted Use of Hazardous Substances:
- N
- Body Width (mm):
- 4.6
- Minimum Installation Temperature (°C):
- -20
- Prop 65 Warning:
- No
- Product Material:
- Nylon 6.6
- Product Color:
- Natural
- Product Size:
- 7"
- Product Size:
- 9"
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Pack Size:
- 1000
- Trade Size:
- 7" - 9"
- Listing:
- UL Recognized
- Standards:
- UL 62275
Panduit SSM2S-C – Frequently Asked Questions
1) Can the Panduit Sta-Strap marker tie be reopened to relabel a cable without cutting it off?
Yes. The Pan-Ty Sta-Strap marker tie is a releasable flag/wrap design, so the strap reopens and re-closes for relabeling or re-routing instead of being cut and replaced. That is the practical difference between it and a one-shot locking tie: on a moving cable run or a panel that gets re-terminated, you keep the same tie.
2) What size cable bundle will a Panduit SSM2S-C marker tie hold?
It handles bundles down to a 0.06 in (1.5mm) minimum diameter, so single small conductors and patch cords are fine, not just fat bundles. The strap is 6.7 in (170mm) long in the 7 inch size, and a longer 9 inch version (SSM4S-D) covers larger bundles. Body width is 0.18 in (4.6mm), a standard cross section.
3) Is this Panduit cable tie UL Recognized and RoHS compliant for a spec job?
It is UL Recognized under File #E56854 and compliant with UL 62275 (Type 1, 11). It is also CE marked and RoHS compliant, with no lead or mercury content indicated and no Prop 65 warning. That covers most submittal requirements for control panel and data center cable management.
4) Are Panduit Sta-Strap marker ties rated for outdoor or UV exposure?
No. These are specified for indoor applications only. The natural (undyed) Nylon 6.6 body has no UV stabilizer, so for exterior runs, rooftop conduit, or anything in direct sun you want a black weather-resistant tie instead of this one.
5) Which size Sta-Strap marker tie should I order, the 7 inch or the 9 inch?
Two sizes are offered: the 7 inch SSM2S-C and the 9 inch SSM4S-D. Both carry the same 50lb (222N) minimum loop tensile strength and the same Nylon 6.6 natural body, so the choice is purely bundle circumference. Use the 9 inch when you are wrapping multi-cable trunks or leaving slack for a wrap-style flag; the 7 inch suits patch cords and individual conductors.
6) Can I install these ties in a cold warehouse or walk-in, and what temperature do they operate at?
Operating range is -76F to 185F (-60C to 85C), but installation is a different number: do not install below -4F (-20C). Nylon stiffens in the cold and a strap looped up near freezing can crack. Install warm, then the tie holds down to -76F.
7) How do these marker ties ship, and is there a minimum order quantity?
They ship in packs of 1,000 pieces, with a minimum order of 500 pieces. Pallet quantity is 60,000. Country of origin is Singapore, and the product is ARRA compliant if that matters on a federally funded job.
8) Will a 50lb tensile cable tie be strong enough for bundling data center cabling?
For labeling and bundle retention, yes. The 50lb (222N) minimum loop tensile rating is a standard cross-section rating and is intended for holding bundles together, not for supporting cable weight as a load-bearing anchor. In data racks, telecom runs, and control panel wiring that is exactly what it is doing, with the flag carrying the ID.
9) Do I need a special tool to install Panduit Sta-Strap marker ties?
No tensioning tool is required. The Sta-Strap is a hand-applied releasable flag/wrap tie, so you loop it, close the strap, and write or apply the label on the flag. Unlike tension-and-cut installation ties, there is no tail to trim.
How fast can I get the Panduit SSM2S-C delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Panduit SSM2S-C come with a warranty?
Absolutely. The Panduit SSM2S-C is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Panduit SSM2S-C?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Panduit SSM2S-C from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.