Pasco 1505 Brass Wood Screw, 2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.48

Pasco 1505 Brass Wood Screw, 2" #12 Phillips-Head, Pack of 100

(No reviews yet) Write a Review

Model: 1505

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.48
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

Pasco 1505 Brass Wood Screw, 2" #12 Phillips-Head

The Pasco 1505 is a 2" #12 brass wood screw with a Phillips-head drive, built for plumbing and general trade fastening tasks where a corrosion-resistant, non-ferrous fastener is preferred over standard steel hardware. Brass construction makes this screw a practical choice for mounting plumbing accessories, fixtures, escutcheons, and related trim where steel screws could rust or stain surrounding materials over time. Each unit measures 2" in length with a #12 shank diameter, and the Phillips-head design allows for fast, secure driving with a standard Phillips screwdriver or bit. Sold in a package quantity of 500 EA, with a minimum order quantity of 100 EA and order quantities in multiples of 100 EA, this listing is set up for trade and contractor-volume purchasing rather than single-piece retail sale.

Key Features

  • Size: 2" length, #12 shank, sized for general plumbing accessory and fixture mounting applications.
  • Durable Construction: Brass material resists corrosion better than plain steel, making it well suited for damp or wet-adjacent installation areas common in plumbing work.
  • Drive Type: Phillips-head design for compatibility with standard Phillips screwdrivers and driver bits during rough-in and finish work.
  • Fastener Type: Wood screw profile intended for securing plumbing accessories and hardware into wood substrates.
  • Bulk Packaging: Supplied 500 EA per package, ideal for plumbers, contractors, and shops that need a consistent on-hand supply of a common fastener size.
  • Order Quantity: Minimum order quantity of 100 EA, in multiples of 100 EA, supporting trade-volume ordering.

Technical Specifications

  • Prop 65 Warning: Y
  • Product Type: Home Improvement & Commercial Supplies - Plumbing Accessories
  • Consumer Package Weight: 0.012 LB
  • Quantity: 500 EA
  • Minimum Order Quantity: 100 EA
  • Order Quantity Multiple: 100 EA

Typical Applications

  • Mounting Plumbing Accessories and Trim
  • Securing Escutcheons and Fixture Hardware
  • Residential and Commercial Rough-In and Finish Plumbing
  • General Wood-Substrate Fastening in Plumbing Installations
  • Contractor Stock and Bulk Fastener Supply

Why Pasco?

Pasco supplies brass fasteners built for the demands of plumbing and trade work, where corrosion resistance and consistent sizing matter for a reliable installation. The 1505 wood screw's brass construction and Phillips-head drive make it a dependable choice for plumbers and contractors who need a fastener that performs well in damp environments and stands up to repeated use. With bulk packaging and trade-friendly order quantities, Pasco makes it easy to keep this common hardware item stocked and ready for the job.

Manufacturer Resources

Product Specs

Prop 65 Warning:
Y
Product Type:
Wood Screw
Consumer Package Weight:
0.012 LB
Item Quantity:
500 EA
Minimum Order Quantity:
100 EA
Order Quantity Multiple:
100 EA
list_batch:
PAO-20260924
Department:
Plumbing
Product Subgroup:
Hangers and Supports
Product Size:
2"
Pack size (unit):
100

Pasco 1505 – Frequently Asked Questions

1) What size is the Pasco 1505 brass wood screw?
The Pasco 1505 is a 2 inch long wood screw with a #12 shank and a Phillips drive. The 2 inch length gives enough bite for mounting plumbing trim and accessory hardware into wood framing or blocking, and the #12 shank is the common size for escutcheon and fixture mounting hardware. It drives with a standard Phillips screwdriver or bit, so no special driver is needed.
2) Can I buy just a handful of Pasco 1505 screws, or is there a minimum?
This one is set up for trade volume, not single-piece sale. The minimum order is 100 each, and quantities go up in multiples of 100 each, so you order 100, 200, 300 and so on. If you only need a few screws for one fixture, this is more fastener than the job calls for; it is priced and packaged for shops keeping a common size on the shelf.
3) Will the Pasco 1505 brass screw hold into drywall or masonry?
No. It is a wood screw profile, meant to thread into a wood substrate such as framing, blocking, or a wood backer. Driven into hollow drywall it has nothing to grip, and it will not cut into masonry or tile. For those substrates you need a drywall anchor or a masonry anchor and screw rated for the base material.
4) Why use a brass wood screw instead of a plain steel one on plumbing trim?
Brass is non-ferrous, so the 1505 will not rust and bleed stains onto tile, stone, or finished walls the way a plain steel screw can in a damp location. That matters under sinks, behind escutcheons, and anywhere the fastener sits in a wet-adjacent area during rough-in or finish plumbing. Trade-off to know: brass is softer than hardened steel, so it is a trim and accessory fastener, not a structural one.
5) Does the Pasco 1505 screw carry a Prop 65 warning?
Yes. The 1505 brass wood screw is flagged with a California Proposition 65 warning. Brass alloys commonly contain lead, which is the usual reason for that flag on a brass fastener. If you are shipping into California or supplying a job with Prop 65 labeling requirements, plan on passing the warning through.
6) What jobs is the Pasco 1505 brass screw actually used for?
Mounting plumbing accessories and trim: escutcheons, fixture hardware, supply and waste trim plates, and similar items that fasten into wood. It also works as general wood-substrate fastening on residential and commercial rough-in and finish plumbing. Plumbing supply houses and contractor shops stock it as a standing item because #12 by 2 inch brass is a size that comes up repeatedly on trim work.
7) What is the manufacturer part number for the Pasco 2 inch brass Phillips wood screw?
Pasco part number 1505 covers the 2 inch #12 brass Phillips-head wood screw. There is a single size offered under that number, so you specify 1505 and the 2 inch size without further options to pick.
How fast can I get the Pasco 1505 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pasco 1505 come with a warranty?
Absolutely. The Pasco 1505 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pasco 1505?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pasco 1505 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.