Pasco 5715 Flexible DWV Tee Pi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.80
Image coming soon

Pasco 5715 Flexible DWV Tee Pipe Fitting

(No reviews yet) Write a Review

Model: PAO5715

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pasco 5715 Flexible DWV Tee Pipe Fitting

The Pasco 5715 Flexible DWV Tee is a rough-in plumbing fitting designed for drain-waste-vent (DWV) branch connections behind the wall or under the floor. This family is available in 1-1/2" and 2" trade sizes, giving plumbers and contractors a flexible tee body that can be matched to the main DWV run being tapped for a branch line. The flexible design accommodates minor offset and alignment variation that rigid fittings cannot absorb, making it a practical choice for tight retrofit and remodel cavities where a straight rigid tee will not line up cleanly. Like all Pasco plumbing accessories, this tee is built for the trade — a plumber or contractor roughing in a drain, waste, or vent branch rather than a homeowner selecting finish-grade fixtures. Whether the job calls for the 1-1/2" or 2" size, the same flexible-body construction and rough-in application apply across the line.

Key Features

  • Trade Size Range: Available in 1-1/2" and 2" sizes to match common DWV branch and main-line diameters.
  • Flexible Tee Body: Flexes to accommodate minor pipe misalignment during branch installation, easing rough-in on DWV runs where rigid fittings bind or crack under stress.
  • DWV Application: Purpose-built for drain-waste-vent branch connections in residential and commercial rough-in plumbing systems.
  • Behind-the-Wall Fitting: Designed for concealed installation inside wall cavities and under-floor runs, not as a visible or decorative fixture.
  • Trade-Grade Supply Item: Sold as a single-unit rough-in accessory (minimum order quantity of 1 EA) for stocking on service trucks or job-site supply runs.
  • Prop 65 Labeled: Carries a California Proposition 65 warning per state labeling requirements.

Technical Specifications

  • Trade Size: 1-1/2" and 2"
  • Prop 65 Warning: Y
  • Product Type: Home Improvement & Commercial Supplies - Plumbing Accessories
  • Minimum Order Quantity: 1 EA

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Drain-Waste-Vent (DWV) Branch Connections
  • Renovation and Remodel Retrofit Runs
  • Behind-the-Wall and Under-Floor Installations
  • Service Truck and Job-Site Plumbing Supply Stock

Why Pasco?

Pasco supplies plumbing accessories built for the demands of professional rough-in work, where fittings need to perform reliably once they are sealed behind a wall or under a floor. The 5715 Flexible DWV Tee gives plumbers and contractors a practical option for branch connections that need a bit of give during installation, available in the 1-1/2" and 2" sizes most commonly specified for residential and light-commercial DWV rough-in, backed by Pasco's commitment to trade-grade plumbing supply.

Manufacturer Resources

Product Specs

Prop 65 Warning:
Y
Product Type:
DWV Tee Fitting
Minimum Order Quantity:
1 EA
list_batch:
PAO-20260924
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
2"
Product Size:
1-1/2"
Item Quantity:
50
Package Weight:
0.62 pounds

Pasco PAO5715 – Frequently Asked Questions

1) Why use a flexible DWV tee instead of a rigid PVC or ABS tee?
A rigid tee demands that the main run and the branch line up cleanly. The Pasco 5715 flexible body takes up minor offset and alignment variation, so it is the better pick in tight remodel and retrofit cavities where a rigid tee would bind or crack under stress. If you are roughing in new work with open framing and can set the pipe straight, a solid-hub DWV tee is the simpler, cheaper connection.
2) Is the Pasco 5715 DWV tee rated for pressure lines or supply water?
No. The 5715 is a drain-waste-vent fitting, built for gravity drain, waste, and vent branch connections in residential and light-commercial rough-in. Do not put it on a pressurized supply line; use a pressure-rated supply fitting for that.
3) Can the Pasco 5715 tee be buried in a wall or under a floor?
Yes, that is what it is for. The 5715 is a rough-in fitting intended for concealed DWV branch connections inside wall cavities and under-floor runs, not a finish or decorative fitting. Standard practice applies: test the joint before you close the wall.
4) What is the manufacturer part number for the 1-1/2 inch Pasco flexible DWV tee?
Pasco part number 5715 covers the 1-1/2 inch flexible DWV tee. Order by that number plus the trade size so the branch and run diameters come through correctly on the ticket.
5) Do I have to buy the Pasco 5715 tee in a case, or can I get one?
Single units. Minimum order quantity on the 5715 is 1 each, so you can grab one for a service call or stock a handful on the truck. Package weight is 0.62 pounds per fitting, which is light enough that it costs nothing to carry both sizes in the van.
6) Does the Pasco 5715 come with a California Prop 65 warning?
Yes, the 5715 carries a California Proposition 65 warning per state labeling requirements. That matters if you are a distributor or institutional buyer reshipping into California and need the label documented on the item.
How fast can I get the Pasco PAO5715 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pasco PAO5715 come with a warranty?
Absolutely. The Pasco PAO5715 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pasco PAO5715?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pasco PAO5715 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!