Pasco 57244 Flexible Sewer Sad...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.02
Image coming soon

Pasco 57244 Flexible Sewer Saddle Wye Fitting, 4" DWV Connection

(No reviews yet) Write a Review

Model: 57244

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.02
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pasco 57244 Flexible Sewer Saddle Wye Fitting, 4" DWV Connection

The Pasco 57244 Flexible Sewer Saddle Wye is a 4" rough-in fitting built for plumbers and contractors adding a new branch line to an existing sewer or drain run without cutting in a full fitting. The flexible saddle design lets the wye conform to the host pipe for a tight branch connection, making it a practical solution for tie-ins on underground or under-slab drain-waste-vent (DWV) lines. This is a behind-the-wall / below-grade rough-in component, sold by Pasco for commercial and residential plumbing supply applications where a secondary branch line needs to be added to a 4" main.

Key Features

  • Trade Size: 4" nominal connection, sized to match standard 4" sewer and drain line branch tie-ins.
  • Flexible Saddle Design: The saddle body flexes to seat against the host pipe, simplifying branch connections on existing sewer runs during rough-in or repair work.
  • Wye Configuration: Wye-pattern branch fitting supports proper drainage flow direction when tying a new line into an existing 4" run, consistent with standard DWV branch practices.
  • Rough-In / Below-Grade Use: Designed for installation on sewer and drain lines that run underground or under a slab, ahead of finish work.
  • Sold in Case Quantity: Packaged 10 EA per unit for stocking distributors and contractors handling multiple tie-ins across a job or route.
  • Minimum Order Quantity: Available starting at 1 EA for smaller orders and single-job needs.

Certifications & Compliance

  • Prop 65 Warning applies to this product; refer to product packaging for details.

Technical Specifications

  • Product Type: Home Improvement & Commercial Supplies - Plumbing Accessories
  • Consumer Package Weight: 7.116 LB
  • Quantity: 10 EA
  • Minimum Order Quantity: 1 EA
  • Prop 65 Warning: Y

Typical Applications

  • Branch Tie-Ins on Existing 4" Sewer Lines
  • Underground and Under-Slab Drain-Waste-Vent Rough-In
  • Residential and Commercial Sewer Line Repair or Expansion
  • New Construction Drain Branch Connections
  • Plumbing Supply House and Contractor Stock

Why Pasco?

Pasco supplies rough-in plumbing hardware built for the working conditions plumbers and contractors deal with on the job, from below-grade sewer tie-ins to everyday DWV branch connections. The flexible saddle construction on the 57244 wye is designed to make a 4" branch connection practical without a full pipe cut-in, helping crews move faster on repair and expansion work. Available individually or by the case, Pasco keeps this fitting stocked for both single-job needs and route-based contractor demand.

Manufacturer Resources

Product Specs

Prop 65 Warning:
Y
Product Type:
Saddle Fitting
Consumer Package Weight:
7.116 LB
Item Quantity:
10 EA
Minimum Order Quantity:
1 EA
list_batch:
PAO-20260924
Department:
Plumbing
Product Subgroup:
Fittings and Valves
Product Size:
4"

Pasco 57244 – Frequently Asked Questions

1) What is a flexible sewer saddle wye used for on an existing 4 inch sewer line?
The Pasco 57244 saddle wye lets you add a new branch to an existing 4 inch sewer or drain run without cutting in a full fitting. The saddle body flexes to seat against the host pipe, and the wye pattern directs the new line into the main in the flow direction, which is standard DWV branch practice. It is a rough-in part for underground or under-slab runs, installed ahead of finish work.
2) Will the Pasco 57244 saddle wye work on a 3 inch drain line?
No. The 57244 is a 4 inch nominal fitting, sized to match standard 4 inch sewer and drain branch tie-ins. For a 3 inch main you need a saddle sized for 3 inch pipe, not this one.
3) Can I buy just one Pasco 57244 saddle wye, or do I have to take a full case?
Minimum order is 1 EA, so a single fitting for one tie-in is fine. It is also packaged 10 EA per case for supply houses and contractors running multiple tie-ins across a route or job.
4) Is this the right fitting for a buried or under-slab sewer tie-in, or is it only for above-grade work?
Below-grade is exactly what it is for. Pasco lists the 57244 for sewer and drain lines running underground or under a slab, as a rough-in component installed before finish work. Typical uses include sewer line repair or expansion and new construction drain branch connections, residential or commercial.
5) Does the Pasco 57244 carry a Prop 65 warning?
Yes, a Prop 65 warning applies to the 57244 saddle wye. Details are on the product packaging, which matters if you are buying into California jobs or a distribution channel that requires the notice passed through.
6) What is the manufacturer part number for the 4 inch Pasco flexible sewer saddle wye?
Pasco part number 57244, the 4 inch flexible sewer saddle wye. There is one size on the model, 4 inch, so the part number and the trade size are all you need to order it correctly.
7) What does the Pasco 57244 case weigh for shipping and stocking?
Consumer package weight is listed at 7.116 lb. That is the figure to plan around when you are stocking the 10 EA case on a truck or shelf.
How fast can I get the Pasco 57244 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pasco 57244 come with a warranty?
Absolutely. The Pasco 57244 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pasco 57244?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pasco 57244 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!