You may also like
Pass & Seymour 21415 30A Power Interrupting Plug, Metallic with Rubber Cord Grip
Model: PSE-21415
Pass & Seymour 21415 30A Power Interrupting Plug, Metallic with Rubber Cord GripThe Pass & Seymour 21415 is a 3-pole, 4-wire (3P4W) Power Interrupting Plug rated 30A/600VAC and 20A/250VDC, built with...
Pass & Seymour
$196.77
Pass & Seymour 21414 Power Interrupting Connector, Metallic with Rubber Cord Grip
The Pass & Seymour 21414 is a Power Interrupting Connector built for industrial control circuit applications, rated 3P4W 30A/600VAC and 20A/250VDC with a .36-.48 Arm control range. Constructed of metallic materials for durability and finished with a rubber cord grip for secure cable retention, this 4-wire connector is engineered for reliable performance in demanding electrical control environments. The unit is RoHS compliant and manufactured in the United States, making it a dependable choice for professional and industrial electrical installations.
Key Features
- Power Interrupting Design: Configured as a 3-pole 4-wire (3P4W) connector for control circuit interruption and connection.
- Electrical Rating: Rated 30A/600VAC and 20A/250VDC with a .36-.48 Arm control range for demanding industrial control applications.
- Durable Construction: Metallic housing provides strength and long-term durability in industrial environments.
- Rubber Cord Grip: Integrated rubber cord grip secures cable connections and reduces strain at the termination point.
- 4-Wire Configuration: Designed to accommodate a 4-wire circuit for complete control power connections.
- Quality Materials: Built with quality materials and a time-tested design for consistent, reliable performance.
- RoHS Compliant: Meets RoHS requirements for restricted hazardous substances.
Certifications & Compliance
- RoHS Compliant
- Buy American Act Compliant
Technical Specifications
- Type: Power Interrupting, Connector
- Volts: 600V
- Amps: 30A
- Material: Metallic
- Special Features: Rubber Cord Grip
- Number Of Wires: 4
- RoHS: Yes
- Country Of Origin: United States of America
Typical Applications
- Industrial Power Control Circuits
- Machinery and Equipment Interconnects
- Commercial and Industrial Electrical Installations
- Control Panel Wiring
- Renovation and New Construction Electrical Work
Why Pass & Seymour?
Pass & Seymour builds this power interrupting connector with quality materials, durable metallic construction, and a time-tested design intended for dependable performance in demanding control circuit applications. RoHS compliance and Buy American Act compliance reflect a commitment to responsible manufacturing and code-compliant performance for professional electrical work.
Manufacturer Resources
Product Specs
- list_batch:
- PASS-20260820
- Product Type:
- Connector
- Voltage Rating:
- 600V
- Amperage Rating:
- 30A
- Standards:
- RoHS Compliant
- Country Of Origin:
- United States
- Product Material:
- Metallic
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Plugs & Connectors
Pass & Seymour 21414 – Frequently Asked Questions
1) What does a power interrupting connector like the Pass & Seymour 21414 actually do differently from a standard straight blade connector?
A power interrupting connector is built so the circuit is broken inside the device as it is separated, rather than drawing an arc at the exposed blades. The Pass & Seymour 21414 is configured 3-pole 4-wire for control circuit interruption and connection, which is why it carries a .36-.48 Arm control range alongside its power ratings. A standard straight blade connector, like the Leviton industrial grade 2-pole 3-wire 125V 20A device, is for general cord-and-plug equipment, not for interrupting a control circuit under load.
2) Can the Pass & Seymour 21414 connector be used on a 480V three-phase machine circuit?
Yes. The 21414 is rated 30A at 600VAC, so a 480V three-phase feed is inside its voltage rating, and the 3-pole 4-wire configuration gives you three phase conductors plus the fourth wire. It also carries a 20A/250VDC rating for DC control circuits. Stay within 30A on the AC side.
3) Is the Pass & Seymour 21414 the same kind of connector as a NEMA 5-15R or 5-20R cord connector?
No. The Pass & Seymour 21414 is a power interrupting connector rated 30A and 600V, built with a metallic housing and a rubber cord grip, wired as a 3-pole 4-wire control circuit device. Straight blade cord connectors such as the Bryant 8269T hospital grade NEMA 5-15R or the Leviton 8319-C hospital grade NEMA 5-20R are two-pole 125V configurations for general equipment cords, so they will not mate with or replace a 4-wire 600V interrupting connector.
4) Is the Pass & Seymour 21414 housing metal or plastic, and will it hold up in a plant environment?
Metallic housing, not thermoplastic. That is the reason it gets specified for machinery interconnects and control panel work where a connector takes knocks and gets dragged across concrete. It is made in the United States and is RoHS compliant.
5) Does the Pass & Seymour 21414 connector include strain relief for the cord, or do I need a separate cord grip?
Strain relief is built in. The 21414 comes with an integrated rubber cord grip that clamps the cable and takes the pull off the terminations, so you do not need to add a separate bushing or cord connector at the device.
6) Is the Pass & Seymour 21414 acceptable on a federally funded or government project?
It is Buy American Act compliant and manufactured in the United States, which is what government, military, and federally funded institutional specs usually hinge on. RoHS compliance is also documented.
7) What should I use instead if my equipment is a standard 120V plug-in tool in a rough jobsite environment?
A 600V 30A power interrupting connector is overbuilt and the wrong configuration for a 120V corded tool. The Eaton Arrow Hart severe duty straight blade connector, 15A 125V NEMA 5-15R, is the jobsite-duty choice there. Keep the 21414 for three-phase control and machinery interconnects.
8) Does the 21414 give me a ground, or are all four wires current carrying?
The 21414 is designated 3P4W, meaning three poles plus a fourth wire. The three poles are the current carrying conductors; the device is sold as a 4-wire connector for complete control power connections. If your installation needs a separate equipment ground in addition to three phases and a neutral, you need a 3-pole 5-wire device instead.
9) Which of these connectors is US made and RoHS compliant?
The Pass & Seymour 21414 power interrupting connector is manufactured in the United States and is RoHS compliant, which also makes it the pick when a Buy American requirement is attached to the job. The comparable straight blade cord connectors are classed by service grade instead - industrial for the Leviton 15W33, severe duty for the Eaton Arrow Hart, hospital grade for the Bryant 8269T and Leviton 8319-C.
How fast can I get the Pass & Seymour 21414 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 21414 come with a warranty?
Absolutely. The Pass & Seymour 21414 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 21414?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 21414 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.