Pass & Seymour 5351W 20A 125V ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$56.14
$34.59
Pass & Seymour 5351W 20A 125V Heavy-Duty Spec-Grade Side-Wire Single Receptacle, White

Pass & Seymour 5351W 20A 125V Heavy-Duty Spec-Grade Side-Wire Single Receptacle, White

(No reviews yet) Write a Review

Model: 5351-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$56.14
$34.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 5351W 20A 125V Heavy-Duty Spec-Grade Side-Wire Single Receptacle, White

The Pass & Seymour 5351W is a 20A 125V heavy-duty, spec-grade single receptacle finished in white, engineered with side-wire termination for fast, reliable installation. Built with a one-piece brass triple-wire power contact system and a corrosion-resistant zinc-plated steel mounting strap, this receptacle is designed for demanding commercial and industrial electrical environments. The 5351W carries a cULus Listing, confirming it meets recognized safety standards for professional wiring device applications.

Key Features

  • Electrical Rating: Rated 20A at 125V for heavy-duty branch-circuit and equipment loads.
  • Side Wire Termination: Backed-out tri-drive steel terminal screws with internal screw-pressure-plate side-wire capability for a fast, secure connection.
  • Automatic Grounding: Auto-ground clip assures a positive ground connection on every installation.
  • Durable Construction: Heavy-duty, corrosion-resistant zinc-plated steel strap adds strength and long-term durability.
  • One-Piece Brass Contacts: One-piece brass triple-wire power contacts provide lasting retention and consistent conductivity.
  • Split-Circuit Capability: Factory-broken split-circuit tab allows 50% plug load control to be achieved.
  • Temperature Performance: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current; operating temperature range of -40°C to +60°C without impact.
  • Finish: Matte white finish suited for visible, professional installations.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Line: Pass & Seymour
  • Product Width: 1.38 in
  • Product Depth: 1.08 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Heavy-Duty Branch Circuit Wiring
  • Spec-Grade Wiring Device Upgrades
  • Split-Circuit Plug Load Control Applications
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour builds the 5351W with a one-piece brass triple-wire contact system and a corrosion-resistant zinc-plated steel strap, delivering the durability professionals expect from a spec-grade wiring device. With cULus Listing and defined temperature-rise performance under overload testing, this receptacle is engineered for dependable, code-compliant performance in demanding 20A 125V applications.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Receptacle
Product Color:
White
Voltage Rating:
125V
Amperage Rating:
20A
Connection Type:
Side Wire
Product Finish:
Matte
Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Depth:
1.08 in
Product Width:
1.38 in

Pass & Seymour 5351-W – Frequently Asked Questions

1) Is the Pass & Seymour 5351W a single receptacle or a duplex?
The 5351W is a single receptacle, one 20A 125V outlet per device, not two. If you need two outlets in the same box opening, a duplex device like the Bryant 5362B heavy-duty 20A/125V duplex or the Leviton 16352-1PW commercial grade 20A 125V duplex is what you want instead. Single receptacles are usually spec'd when one piece of equipment gets a dedicated circuit and you don't want a second plug sharing it.
2) Can I back-wire the Pass & Seymour 5351W, or is it side-wire only?
Side wire only. The 5351W terminates on backed-out tri-drive steel terminal screws with internal screw-pressure plates, so the conductor goes under the plate at the side of the device and the screw clamps it. There is no back-wire push-in hole and no feed-through clamp pocket. Strip and dress your conductors for side entry.
3) Does the 5351W work for a split-circuit install where half the load is switched?
It has split-circuit capability built in. The tab is broken at the factory, so the device can be fed from two sources to give 50 percent plug load control, which is how plug-load control requirements are commonly met on commercial jobs. No tab-breaking at the box, but you do have to pull the second hot.
4) Is the Pass & Seymour 5351W acceptable for patient-care areas, or is a hospital grade device required?
The 5351W is a heavy-duty spec-grade receptacle with a cULus Listing, but it is not a hospital grade device. Where the facility requires hospital grade, the Leviton 16262-HGW is a hospital grade duplex receptacle in white, supplied in packs of 100 for standardizing a wing or floor.
5) Can the Pass & Seymour 5351W be used in a hazardous or washdown location?
The 5351W is a general-purpose heavy-duty spec-grade wiring device for commercial and industrial branch circuits at 20A 125V. It is not an explosionproof or factory-sealed device. Where the area classification demands that, Appleton offers the FSQC Series interlocked explosionproof receptacle and the U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set in a 3-pole configuration.
6) What is the closest heavy-duty 20A 125V alternative to the Pass & Seymour 5351W if a duplex outlet is needed instead of a single?
The Pass & Seymour 5351W is a single receptacle rated 20A at 125V. When the opening calls for two outlets on the same strap, the Bryant 5362B is a heavy-duty 20A/125V duplex receptacle, and the Bryant 5362BI is the same 20A/125V heavy-duty duplex in a different color. Both cover two devices per yoke where the 5351W provides one.
7) Will the Pass & Seymour 5351W work on a 277V or 250V circuit?
No. The 5351W is rated 125V at 20A. For a 277V circuit, the Bryant 430R9W 4750DR is a 2-pole 3-wire 277V motor-duty receptacle. For higher-current locking service, the Eaton 7379 is an extra heavy duty industrial locking receptacle rated 50A at 600V/250V AC/DC in black.
8) Will a 20A receptacle like the 5351W accept a standard 15A plug?
Yes. The 5351W is rated 20A at 125V, and a 20A 125V straight blade configuration takes both the common 15A parallel-blade plug and the 20A plug with the sideways blade. Keep in mind it is a single outlet, so one cord at a time.
9) Is the Pass & Seymour 5351W tough enough for an industrial plant or shop floor?
It's built as a heavy-duty spec-grade device: one-piece brass triple-wire power contacts for plug retention and conductivity, and a corrosion-resistant zinc-plated steel mounting strap. Rated operation is -40C to +60C, and it holds a maximum 30C temperature rise at full rated current after 50 overload cycles at 150 percent of rated current with direct current. That's the performance profile for commercial and industrial branch circuits.
10) Do I need a separate bonding jumper to the box with the 5351W?
The 5351W includes an auto-ground clip, which makes a positive ground connection to a properly grounded metal box through the mounting strap on every install. You still terminate the equipment grounding conductor as your inspector and the job spec require, but the clip removes the reliance on yoke-to-box contact alone.
11) What are the alternatives if I need a single receptacle but at 15 amps instead of 20?
The 5351W is a 20A device only. For a 15A single outlet, ZenSupply carries the Eaton commercial specification grade 15A single receptacle. There's also an Eaton heavy-duty industrial specification grade decorator single receptacle rated for #14-10 AWG conductors if you want a decorator-style face on a single outlet.
12) Will the 5351W fit a standard single-gang box and take a standard wallplate?
The device body measures 1.38 in wide by 1.08 in deep, mounted on a zinc-plated steel strap for standard single-gang mounting. It needs a single-receptacle wallplate with the round opening, not a duplex plate, since it is a one-outlet face.
13) What commercial grade 20A 125V options compare to the Pass & Seymour 5351W?
The 5351W is a heavy-duty spec-grade single receptacle at 20A 125V. On the commercial grade side, the Leviton 16352-1PW is a commercial grade heavy-duty straight blade duplex rated 20A 125V NEMA 5-20R, and the Leviton 16342 is a Decora Plus commercial grade duplex, 20A 125V NEMA 5-20R in white. Both are duplex devices with a flush or decorator face rather than the single outlet face of the 5351W.
14) I need more than two outlets at one location - what replaces the Pass & Seymour 5351W?
The 5351W provides a single 20A 125V outlet. For four outlets at one box, the Bryant 21254IGO is a quad straight-blade receptacle, NEMA 5-20R, rated 20A, keeping the same 20A straight-blade configuration while serving four plugs.
15) Is there an impact-resistant alternative to the Pass & Seymour 5351W for high-abuse areas?
The 5351W uses a zinc-plated steel mounting strap and one-piece brass triple-wire contacts for durability in demanding commercial and industrial service. If an impact-resistant face is the priority, the Leviton 16251W is a commercial grade heavy-duty impact-resistant straight blade receptacle.
16) Will the 5351W match the white devices already in my building?
The 5351W is white with a matte finish, so it reads the same as other matte white spec-grade devices rather than a gloss or Decora-style face. It is a single-outlet face though, so beside a duplex on the same wall it will look different even in matching white.
How fast can I get the Pass & Seymour 5351-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 5351-W come with a warranty?
Absolutely. The Pass & Seymour 5351-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 5351-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 5351-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!