Pass & Seymour 5651 Heavy Duty...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.20
$9.13
Pass & Seymour 5651 Heavy Duty Spec-Grade Single Receptacle, 15A 250V, Brown

Pass & Seymour 5651 Heavy Duty Spec-Grade Single Receptacle, 15A 250V, Brown

(No reviews yet) Write a Review

Model: 5651

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.20
$9.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 5651 Heavy Duty Spec-Grade Single Receptacle, 15A 250V, Brown

The Pass & Seymour 5651 Heavy Duty Spec-Grade Single Receptacle delivers reliable 15A 250V power distribution for demanding commercial and industrial electrical installations. Built with a corrosion-resistant zinc-plated steel strap and one-piece heat-treated triple-wipe brass power contacts, this brown receptacle is engineered for long-term durability under heavy use. Back and side wire capability with an internal screw-pressure-plate design gives professional electricians flexible installation options, and cULus Listed certification confirms compliance with rigorous safety standards for professional work.

Key Features

  • 15A 250V Rating: Handles demanding electrical loads with reliable power distribution for commercial and industrial applications.
  • Heavy-Duty Steel Strap: Corrosion-resistant zinc-plated steel construction provides exceptional durability and mounting strength in harsh environments.
  • Triple-Wipe Brass Contacts: One-piece heat-treated brass power contacts ensure lasting electrical connection and superior current retention over time.
  • Back and Side Wire Capability: Internal screw-pressure-plate design with two back wire holes provides flexible wiring options and increased installation efficiency.
  • Auto-Ground Clip: Ensures positive ground connection for enhanced electrical safety and code compliance.
  • Temperature Performance: Maximum 30�C temperature rise at full-rated current with an operating range from -40�C to +60�C for reliable performance in extreme conditions.
  • Color: Brown finish suited for standard commercial and industrial receptacle installations.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Refer to manufacturer documentation for complete specifications.

Typical Applications

  • Commercial Facilities and Office Buildings
  • Industrial Manufacturing Plants
  • Healthcare and Medical Facilities
  • Educational Institutions
  • Retail and Hospitality Establishments
  • Heavy-Duty Equipment Installations

Why Pass & Seymour?

Pass & Seymour delivers professional-grade electrical solutions with cULus Listed safety certification and robust construction designed for demanding applications. The corrosion-resistant zinc-plated steel strap and heat-treated brass contacts ensure long-term reliability, while temperature-tested performance from -40�C to +60�C provides dependable operation in challenging commercial and industrial environments.

Manufacturer Resources

Spec Sheet

Product Specs

Product Material:
Zinc-Plated Steel
Product Type:
Receptacle
Product Color:
Brown
Voltage Rating:
250V
Amperage Rating:
15A
Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Width:
1.38 in
Product Depth:
1.08 in

Pass & Seymour 5651 – Frequently Asked Questions

1) What is the closest alternative to the Pass & Seymour 5651 for a 125V circuit instead of 250V?
The Pass & Seymour 5651 is rated 15A 250V, so it cannot serve a 125V 5-15R opening. For a 15A 125V single outlet, the Eaton 816W is a commercial specification grade single receptacle rated 15A. If a duplex is wanted on that 125V circuit, the Eaton Arrow Hart 5262W is a heavy-duty industrial duplex receptacle, 15A 125V, 5-15R, in gray. Both are 125V devices and will not accept a 250V-configured plug.
2) Can I use the Pass & Seymour 5651 in a hazardous or wet industrial location?
The 5651 is a cULus listed spec-grade device with a zinc-plated steel strap intended for general commercial and industrial interiors. For classified hazardous areas, an explosionproof device is required instead: the Appleton FSQC Series interlocked explosionproof receptacle is built for that duty, and the Appleton U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set is a 3-pole factory-sealed assembly. Those are enclosure-based devices, not flush wiring devices, so box and conduit work differs from a standard 5651 installation.
3) I need more than 15 amps at 250V - what receptacle should I use instead of the 5651?
The Pass & Seymour 5651 tops out at 15A at 250V. For a higher-current 250V circuit, the Eaton 7379 is an industrial locking receptacle rated 50A at 600V/250V AC/DC in black, built to an extra heavy duty grade. Note that the 7379 is a locking configuration, so cord caps must be the matching twist-lock type rather than a straight-blade plug.
4) Is the Pass & Seymour 5651 a single receptacle or a duplex?
Single. One outlet per device, which is what you want when a piece of equipment should have the circuit to itself rather than sharing it with a second cord. If you need two outlets on one strap at 20A/125V, a heavy-duty duplex like the Bryant 5362B covers that instead.
5) Can the 5651 receptacle be back wired, or is it side screws only?
Both. The 5651 has two back wire holes plus side terminals, using an internal screw-pressure-plate rather than a push-in spring clamp, so the conductor is clamped under a plate when you tighten the screw. That gives you a choice of how to land the conductors in a crowded box.
6) Do I still need a separate ground jumper if the box is metal?
The 5651 includes an auto-ground clip, which bonds the strap to a properly grounded metal box through the mounting screw. In a nonmetallic box, or wherever your inspector wants a wire connection, land the equipment ground on the green screw as usual.
7) Will a Pass & Seymour 5651 hold up in an unheated warehouse or a rooftop mechanical room?
Operating range runs from -40C to +60C, with a maximum 30C temperature rise at full rated current. The strap is zinc-plated steel for corrosion resistance. That covers unheated and high-heat interior spaces; it is not a weatherproof or explosionproof device, so wet locations still need an appropriate enclosure and cover.
8) Will the 5651 keep a cord from pulling out, like a twist-lock does?
No, it's a straight-blade device. A cord unplugs with a straight pull. Where vibration or accidental unplugging is the concern, a locking receptacle is the right call, such as the Bryant 7 Series flanged locking receptacle or the Eaton industrial locking receptacle rated 50A at 600V/250V.
9) Is a Bryant 5362B a substitute for the Pass & Seymour 5651?
No. The Bryant 5362B is a heavy-duty 20A/125V duplex receptacle, and the 5362BI is the same 20A/125V heavy-duty duplex in a different color. The Pass & Seymour 5651 is a single receptacle rated 15A at 250V. The Bryant devices differ in voltage, amperage, and outlet count, so they serve a 125V general-purpose circuit rather than a 250V single-appliance drop.
10) I want a single receptacle in a decorator opening rather than the standard 5651 face - what are my options?
The Pass & Seymour 5651 is a standard single receptacle in brown with a zinc-plated steel strap. If the wall plate scheme calls for a decorator-style opening, the Eaton 6450W is a heavy-duty industrial specification grade decorator single receptacle accepting #14-10 AWG conductors. Confirm the voltage and configuration of the Eaton device matches the circuit before swapping, since the 5651 is a 250V device.
11) What should I specify if the load is a motor or a 277V circuit rather than a 250V appliance?
The Pass & Seymour 5651 is a 250V, 15A straight receptacle. For a 277V motor-duty application, the Bryant 430R9W of the 4750DR series is a 2-pole 3-wire 277V motor-duty receptacle, which is the correct device class for that voltage and duty. If the cord connection must not pull free, the Bryant 70520FR is a 7 Series NEMA flanged locking receptacle, a flange-mount twist-lock rather than a flush straight-blade device.
12) How does the Pass & Seymour 5651 compare with the Eaton 816W for a spec-grade job?
Both are single receptacles built to a specification grade. The Pass & Seymour 5651 is rated 15A at 250V, is cULus listed, and uses a zinc-plated steel strap with brown finish. The Eaton 816W is a commercial specification grade single receptacle rated 15A. The deciding factor is the circuit voltage: the 5651 is a 250V device, so it is the one to specify where the drop is 250V.
13) Is the Pass & Seymour 5651 approved for use in Canada?
It carries a cULus Listing, which covers both the US and Canadian requirements for the device itself.
14) What contacts does the 5651 use, and does it matter for equipment that gets plugged and unplugged often?
One-piece heat-treated triple-wipe brass power contacts. Triple-wipe means three points of contact per blade, which is what keeps retention tight on a receptacle that sees repeated cord insertions rather than one permanent connection.
15) What color is the Pass & Seymour 5651, and does that matter on a 250V circuit?
Brown. On 250V work many facilities color-code devices so techs can tell voltage apart at a glance, so if your building standardizes on a different color for 240V outlets, confirm brown fits the scheme before you order a fleet of them.
How fast can I get the Pass & Seymour 5651 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 5651 come with a warranty?
Absolutely. The Pass & Seymour 5651 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 5651?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 5651 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!