Pass & Seymour 5651I 15A 250V ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.20
$9.13
Pass & Seymour 5651I 15A 250V Heavy-Duty Spec-Grade Single Receptacle, Back/Side Wire, Ivory

Pass & Seymour 5651I 15A 250V Heavy-Duty Spec-Grade Single Receptacle, Back/Side Wire, Ivory

(No reviews yet) Write a Review

Model: 5651-I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.20
$9.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 5651I 15A 250V Heavy-Duty Spec-Grade Single Receptacle, Back/Side Wire, Ivory

The Pass & Seymour 5651I is a 15A 250V heavy-duty spec-grade single receptacle finished in Ivory, built for demanding commercial and industrial wiring where reliability under repeated use matters. It supports back and side wire terminations, giving installers added flexibility during rough-in, and is backed by cULus Listing for code-compliant performance. Heavy-duty construction and premium brass contacts make this receptacle a durable choice for spec-grade applications.

Key Features

  • Electrical Rating: Rated 15A at 250V for heavy-duty, spec-grade circuit applications.
  • Positive Grounding: Auto-ground clip assures a positive ground connection on every installation.
  • Back and Side Wire Capability: Backed-out tri-drive steel terminal screws with internal screw-pressure-plate back and side wire capability, plus two back wire holes for increased wiring flexibility.
  • Durable Power Contacts: One-piece, heat-treated triple-wipe brass power contacts for lasting retention and dependable connections.
  • Heavy-Duty Strap: Corrosion-resistant, zinc-plated steel strap adds mounting strength and long-term durability.
  • Thermal Performance: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current; operating temperature range of a maximum continuous +60°C to a minimum -40°C without impact.
  • Finish: Ivory color with a matte finish for a clean, professional appearance.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Line: Pass & Seymour
  • Product Width: 1.38 in
  • Product Depth: 1.08 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Heavy-Duty Equipment and Machinery Circuits
  • Spec-Grade Receptacle Replacements and Upgrades
  • Renovation and New Construction Wiring Projects

Why Pass & Seymour?

Pass & Seymour engineers the 5651I with one-piece, heat-treated triple-wipe brass power contacts, a corrosion-resistant zinc-plated steel strap, and an auto-ground clip for consistent, positive grounding. Combined with back and side wire flexibility and cULus Listing, this spec-grade receptacle delivers the reliable, code-compliant performance professional electricians expect on demanding commercial and industrial jobs.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Receptacle
Product Color:
Ivory
Product Finish:
Matte
Voltage Rating:
250V
Amperage Rating:
15A
Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Width:
1.38 in
Product Depth:
1.08 in

Pass & Seymour 5651-I – Frequently Asked Questions

1) Can I plug a standard 120V appliance into the Pass & Seymour 5651I?
No. The 5651I is a 15A 250V single receptacle, so it is wired on a two-pole 240V circuit and takes a 250V plug configuration. A standard 120V cord cap will not fit it and should not be forced. For 125V work, look at a 125V device such as the Eaton Arrow Hart heavy-duty industrial duplex, 15A 125V, 5-15R.
2) What is the closest heavy-duty single receptacle to the Pass & Seymour 5651I if the circuit is 125V instead of 250V?
The Pass & Seymour 5651I is rated 15A at 250V, so it is not the device for a 125V branch circuit. For a 125V single-outlet opening, Eaton offers a heavy-duty industrial specification grade decorator single receptacle that accepts #14-10 AWG conductors, and Eaton also offers a commercial specification grade single receptacle rated 15A. Confirm the configuration matches the plug on the equipment before swapping, since a 250V device and a 125V device use different blade patterns.
3) Can the Pass & Seymour 5651I be used in a hazardous or explosionproof location?
No. The 5651I is a spec-grade flush device with back and side wire terminals and cULus Listing, intended for standard commercial and industrial boxes. Classified-location work calls for a different product family, such as the Appleton FSQC Series interlocked explosionproof receptacle or the Appleton U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set. Those are enclosure-based devices rather than a drop-in replacement for a flush receptacle.
4) My drawing calls for a locking 250V receptacle. Does the Pass & Seymour 5651I satisfy that?
No. The 5651I is a 15A 250V straight-blade single receptacle, so a cord cap pulls straight out. For a twist-lock connection at 250V, the Eaton 7379 is an extra heavy duty industrial locking receptacle rated 50A at 600V/250V AC/DC in black. That is a much larger ampacity and a different wiring configuration, so the box, conductors, and overcurrent device all have to suit it.
5) Is the Pass & Seymour 5651I the right receptacle for a 277V motor circuit?
No. The 5651I is rated 250V, so a 277V circuit is outside its rating. For that application the Bryant 430R9W, a 4750DR series 2-pole 3-wire 277V motor-duty receptacle, is the device built for the voltage and the motor duty. Verify the plug configuration on the motor or equipment cord before ordering, since the two devices are not interchangeable.
6) Why only one outlet on the 5651I instead of a duplex?
It is a single receptacle, built for one piece of 250V equipment on its own circuit, which is how most 240V machine, heater and compressor drops are run. If you need two 125V outlets on a general-purpose commercial circuit instead, a duplex like the Bryant 5362B heavy-duty 20A/125V is the different animal you want.
7) Does the Pass & Seymour 5651I take back wire or side wire terminations?
Both. It has backed-out tri-drive steel terminal screws with an internal screw-pressure-plate for side wiring, plus two back wire holes. That lets you pick whichever termination keeps the box tidy on a deep or crowded rough-in.
8) Is the 5651I rated for industrial machine circuits or just light commercial?
Heavy-duty spec grade, intended for commercial and industrial installations and equipment circuits. It holds a maximum 30 degree C temperature rise at full rated current after 50 cycles of overload at 150 percent of rated current with direct current, and runs from a continuous maximum of +60 degrees C down to -40 degrees C.
9) Is the Pass & Seymour 5651I UL listed for code inspection?
It carries a cULus Listing, which covers both US and Canadian requirements.
10) Will the 5651I ground properly in a metal box without a separate bonding jumper screw?
The device has an auto-ground clip that establishes a positive ground to the yoke on every installation, along with a corrosion-resistant zinc-plated steel strap for mounting strength. Ground the box itself per code for your jurisdiction.
11) What are the alternatives if I need a locking or hazardous-location 250V receptacle instead?
The 5651I is a straight-blade flush device, not a locking or sealed one. For a twist-lock, the Eaton industrial locking receptacle rated 50A, 600V/250V AC/DC is the locking style. For classified areas, Appleton's FSQC Series interlocked explosionproof receptacle is the hazardous-location type.
12) I need two outlets at the same box, not one. What should I use instead of the Pass & Seymour 5651I?
The 5651I is a single receptacle, so it provides one outlet per device. If the equipment count calls for two, duplex devices in the same heavy-duty class include the Bryant 5362B heavy-duty duplex receptacle rated 20A/125V and the Bryant 5362BI heavy-duty duplex, both 125V devices. The 5651I remains the choice when the load is 250V, since the duplex options named here are 125V.
13) Is the Pass & Seymour 5651I acceptable where hospital grade devices are specified?
The 5651I is a heavy-duty spec-grade device and is cULus Listed, but hospital grade is a separate listing category. Where a patient care area specification calls for hospital grade, the Leviton 16262-HGW is a hospital grade duplex receptacle in white, supplied in packs of 100. Use the 5651I for general commercial and industrial circuits and reserve the hospital grade device for openings the spec marks as such.
14) What is the difference between the Pass & Seymour 5651I and a commercial grade receptacle like the Leviton 16251W?
The 5651I is built to heavy-duty spec grade with triple-wipe brass contacts, a zinc-plated steel strap, and an auto-ground clip, and it is a single 15A 250V outlet. The Leviton 16251W is a commercial grade heavy-duty impact-resistant straight blade receptacle. The deciding factor is usually the circuit: the 5651I covers a 250V single-outlet load, while commercial grade straight blade devices like the 16251W and the Leviton 16352-1PW, a commercial grade heavy-duty duplex rated 20A 125V NEMA 5-20R, serve 125V general-purpose outlets.
15) Will the ivory 5651I match the other devices in my building?
The finish is ivory with a matte face, so it blends with ivory device lines rather than white or gray. If your facility is standardized on white or gray, pick the matching color device for those openings instead.
16) What size opening does the 5651I need in the wall plate?
The device body measures 1.38 in wide by 1.08 in deep, and it uses a single-receptacle face, so it needs a single-receptacle wall plate, not a standard duplex plate.
17) How do I order the right Pass & Seymour 250V single receptacle in ivory?
Order by manufacturer part number 5651-I. The I suffix is the ivory color on the 15A 250V heavy-duty spec-grade single receptacle.
18) I need more than two outlets at one location. Is there an alternative to installing multiple Pass & Seymour 5651I devices?
The 5651I is a single-outlet 250V device, so each one serves one cord cap. Where the need is outlet count on a 125V circuit, the Bryant 21254IGO is a quad straight-blade receptacle, NEMA 5-20R, rated 20A, putting four outlets in one assembly. It is not a substitute on a 250V circuit; for 250V loads you still add 5651I devices per outlet required.
19) If I want an ivory-matched duplex alongside the Pass & Seymour 5651I, what pairs with it?
The 5651I is finished in ivory with a matte finish. For a duplex device in the same ivory color on a 125V circuit, the Bryant 5362BI is a heavy-duty 20A/125V duplex receptacle in ivory. Confirm the amperage suits the branch circuit, since the 5362BI is a 20A device.
How fast can I get the Pass & Seymour 5651-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 5651-I come with a warranty?
Absolutely. The Pass & Seymour 5651-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 5651-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 5651-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!