Pass & Seymour 5751AN Angled P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$261.37
$153.43
Pass & Seymour 5751AN Angled Plug, Yellow

Pass & Seymour 5751AN Angled Plug, Yellow

(No reviews yet) Write a Review

Model: 5751-AN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$261.37
$153.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 5751AN Angled Plug, Yellow

The Pass & Seymour 5751AN is an angled configuration plug finished in high-visibility yellow, built for dependable power connections in commercial and industrial electrical environments. This device is manufactured with quality materials and a time-tested design intended to hold up under repeated plugging, unplugging, and daily job-site handling. The 5751AN conforms to NEMA WD-1 and WD-6 standards, giving electricians and facility teams confidence that the dimensions, performance, and interchangeability of this plug meet recognized industry benchmarks. It is also cULus Listed, meaning it has been independently tested and certified to established safety requirements for electrical wiring devices. The angled plug body helps route cords away from equipment and walls at installation, reducing strain on the cord and connection point compared to a straight in-line plug, which is especially useful in tight equipment bays, under workbenches, or behind panelboards where clearance is limited. Measuring approximately 3.43 in. in height, 2.62 in. in width, and 2.12 in. in depth, the 5751AN is sized to fit typical plug-and-cord assemblies used across commercial, institutional, and industrial facilities.

Key Features

  • Angled Plug Configuration: A yellow angled plug body designed to ease cord routing and reduce strain in confined installation spaces.
  • Quality Materials: Constructed with quality materials and a time-tested design engineered for durability under frequent use.
  • Code Compliance: Conforms to NEMA WD-1 and WD-6 standards, supporting dimensional accuracy and cross-brand interchangeability.
  • cULus Listed: Independently tested and listed, confirming the device meets recognized safety standards for wiring devices.
  • High-Visibility Yellow Housing: The yellow finish makes the plug easy to spot on job sites and in industrial settings where quick identification matters.
  • Compact Footprint: Approximate dimensions of 3.43 in. height, 2.62 in. width, and 2.12 in. depth suit a range of cord-and-plug applications.

Certifications & Compliance

  • cULus Listed
  • Conforms to NEMA WD-1
  • Conforms to NEMA WD-6

Technical Specifications

  • Country Of Origin: Mexico
  • Product Height: 3.43 in
  • Product Line: Pass & Seymour
  • Product Width: 2.62 in
  • Product Depth: 2.12 in

Typical Applications

  • Commercial and Industrial Power Connections
  • Portable Cord and Plug Assemblies
  • Panelboard and Equipment Area Wiring
  • Facilities Maintenance and MRO Electrical Work
  • Renovation and New Construction Electrical Installations

Why Pass & Seymour?

Pass & Seymour engineers the 5751AN with quality materials and a time-tested design, then backs it with cULus Listing and conformance to NEMA WD-1 and WD-6 standards. For electrical professionals who need a code-compliant, durable angled plug that stands up to repeated use on commercial and industrial job sites, the 5751AN offers a dependable, easily identifiable solution from a trusted electrical brand.

Manufacturer Resources

Product Specs

Product Type:
Straight Blade Plug
Product Color:
Yellow
Listing:
cULus
Standards:
NEMA WD-1 and WD-6
Product Line:
Pass & Seymour
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors
Product Depth:
2.12 in
Product Width:
2.62 in
Product Height:
3.43 in

Pass & Seymour 5751-AN – Frequently Asked Questions

1) Is the Pass & Seymour 5751AN plug listed and code compliant for commercial work?
It's cULus Listed, meaning it has been independently tested to the safety requirements for wiring devices in both the US and Canada, and it conforms to NEMA WD-1 and WD-6. WD-6 is the dimensional standard for wiring device configurations, so blade spacing and body dimensions match other devices built to the same configuration regardless of brand.
2) Will the 5751AN mate with another manufacturer's receptacle, or do I need to stay with Pass & Seymour?
No need to stay with one brand. The 5751AN conforms to NEMA WD-1 and WD-6, which fix the blade pattern and dimensions for each configuration, so it mates with any receptacle built to the same NEMA configuration from any manufacturer. Match the configuration, not the brand.
3) Can I use the Pass & Seymour 5751AN on hospital equipment?
No. The 5751AN is a commercial and industrial angled plug and is not a hospital grade device, so it should not be used where green-dot hospital grade is required for patient care areas. For that work ZenSupply carries hospital grade options including the Bryant 8395T angle plug in NEMA 5-20P configuration, the Bryant 8266T in NEMA 5-15P, and the tamper-resistant Leviton 8215-CAT (5-15P) and 8315-CT (5-20P).
4) What is the closest angled plug alternative to the Pass & Seymour 5751AN?
The Leviton 275-E is a commercial grade 4-wire 3-pole straight blade angle plug, making it the nearest angled-body alternative to the Pass & Seymour 5751AN, which is also an angled configuration plug. The 5751AN is cULus Listed and conforms to NEMA WD-1 and WD-6. The 275-E is a 4-wire 3-pole device, so confirm your cord and receptacle configuration match before substituting.
5) Which plugs look like substitutes for the 5751AN but are straight-body, not angled?
Several peers are straight blade in-line plugs rather than angled bodies: the Eaton Arrow Hart Ultra Grip straight blade plug rated 15A 125V industrial grade, the Leviton 5666-C 3-wire 2-pole polarized industrial grade straight blade plug at 250 volt 1-phase, and the Bryant 8266T hospital grade NEMA 5-15P plug. The Pass & Seymour 5751AN uses an angled body specifically to route the cord away from equipment and walls in tight bays and behind panelboards, so a straight plug will not solve a clearance problem.
6) Why choose an angled plug like the Pass & Seymour 5751AN instead of a straight in-line plug?
An angled body turns the cord as it leaves the plug, so the cord runs along the wall or equipment face instead of straight out of the receptacle. That matters in tight equipment bays, under workbenches, and behind panelboards where there isn't clearance for a straight plug, and it takes bending strain off the cord where it enters the body. If you have room in front of the outlet and no clearance issue, a straight blade plug is the simpler choice.
7) What other angled plugs are there if the 5751AN isn't the configuration I need?
For another angle-body option, ZenSupply stocks the Leviton 275-E, a commercial grade 4-wire 3-pole straight blade angle plug, and the Bryant 8395T angle plug in NEMA 5-20P. If an angle isn't required, straight-body choices include the Eaton Arrow Hart Ultra Grip 15A 125V industrial specification grade plug and the Leviton 5666-C, a 3-wire 2-pole polarized industrial grade plug for 250V single phase.
8) I need to reorder the exact same yellow angled plug we already have in the plant. What do I ask for?
The manufacturer part number is 5751-AN, the Pass & Seymour 5751AN angled plug in yellow. It's made in Mexico. That MPN is the whole identity of the part, there are no size or finish options to pick.
9) I need a plug for a wet or washdown location - is the 5751AN suitable?
The Pass & Seymour 5751AN is an angled plug described for commercial and industrial power connections, portable cord assemblies, and equipment area wiring, with no watertight construction stated. Where a sealed device is needed, the Bryant 8666TSP is a watertight hospital-grade plug in N6-15P configuration. Match the configuration to your receptacle before ordering.
10) What is a tamper-resistant alternative to the 5751AN for a facility that requires it?
The Leviton 8215-CAT is a tamper-resistant hospital-grade plug in NEMA 5-15P configuration supplied in packs of 100, and the Leviton 8315-CT is the tamper-resistant hospital-grade 5-20P version, also in packs of 100. The Pass & Seymour 5751AN is an angled plug in high-visibility yellow that is cULus Listed and conforms to NEMA WD-1 and WD-6; the two Leviton devices are specified for tamper-resistant hospital-grade work rather than angled cord routing.
11) What should I order instead of the 5751AN for a 50-amp range or welder cord?
The Bryant 7516NC is a rubber electrical plug in the NM10-50P series, which is the heavier configuration used on large appliance and equipment cords. The Pass & Seymour 5751AN is an angled plug for commercial and industrial cord-and-plug assemblies, cULus Listed and conforming to NEMA WD-1 and WD-6; it is not an NM10-50P device, so confirm the receptacle configuration before substituting either way.
12) For an industrial specification grade requirement, how does the 5751AN compare to the Eaton Arrow Hart Ultra Grip?
The Eaton Arrow Hart Ultra Grip straight blade plug is specified as industrial specification grade at 15A 125V. The Pass & Seymour 5751AN is an angled plug that is cULus Listed and conforms to NEMA WD-1 and WD-6 and is used for commercial and industrial power connections. If your spec calls out industrial specification grade by name, the Arrow Hart device states that grade; if the controlling need is angled cord exit, the 5751AN is the angled body.
13) Why is this plug yellow, and does the color affect anything other than looks?
Yellow is purely for identification. The 5751AN uses a high-visibility yellow housing so a cord-and-plug assembly is easy to pick out on a job site or in an industrial space, which is handy when crews need to spot which cord to pull. It carries no electrical meaning.
14) Is the 5751AN suitable for a portable cord assembly that gets plugged and unplugged all day?
That's the intended use. It's built for portable cord-and-plug assemblies and repeated plugging, unplugging, and job-site handling in commercial, institutional, and industrial facilities, including panelboard and equipment area wiring and general MRO work.
How fast can I get the Pass & Seymour 5751-AN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 5751-AN come with a warranty?
Absolutely. The Pass & Seymour 5751-AN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 5751-AN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 5751-AN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!