Pass & Seymour 5851W 20A 250V ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$57.51
$8.14
Pass & Seymour 5851W 20A 250V Spec-Grade Single Receptacle, White

Pass & Seymour 5851W 20A 250V Spec-Grade Single Receptacle, White

(No reviews yet) Write a Review

Model: 5851-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$57.51
$8.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 5851W 20A 250V Spec-Grade Single Receptacle, White

The Pass & Seymour 5851W is a 20A 250V heavy-duty, spec-grade single receptacle with side wire capability, finished in white for commercial and industrial power applications. Built with a one-piece brass, triple-wipe power contact design and a corrosion-resistant zinc-plated steel strap, this receptacle is cULus Listed for dependable, code-compliant performance in demanding environments.

Key Features

  • Electrical Rating: 20A 250V heavy-duty, spec-grade single receptacle for demanding power applications.
  • Wiring Flexibility: Side wire configuration with internal screw-pressure-plate back and side wire capability, plus two back wire holes for added installation flexibility.
  • Terminal Screws: Backed-out tr-drive steel terminal screws for secure, reliable wire termination.
  • Power Contacts: One-piece brass, triple-wipe power contacts deliver lasting retention and consistent connection integrity.
  • Grounding: Auto-ground clip assures positive ground for added safety.
  • Durable Construction: Heavy-duty, corrosion-resistant zinc-plated steel strap for added strength and long service life.
  • Temperature Performance: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current; continuous operating range of -40°C minimum to +60°C maximum without impact.
  • Finish: Matte white finish for a clean, professional appearance.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Line: Pass & Seymour
  • Product Width: 1.38 in
  • Product Depth: 1.08 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Heavy-Duty 20A 250V Power Distribution Circuits
  • Side-Wire Receptacle Installations
  • Spec-Grade Projects Requiring Code Compliance
  • Renovation and New Construction Wiring

Why Pass & Seymour?

Pass & Seymour engineers the 5851W with one-piece brass, triple-wipe power contacts and a heavy-duty, corrosion-resistant zinc-plated steel strap for lasting durability under demanding conditions. Backed by an auto-ground clip for positive grounding and cULus Listed for verified safety performance, this spec-grade receptacle is built for reliable, code-compliant results on professional electrical projects.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Receptacle
Product Color:
White
Voltage Rating:
250V
Amperage Rating:
20A
Listing:
cULus
Product Finish:
Matte
Connection Type:
Side Wire
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Depth:
1.08 in
Product Width:
1.38 in

Pass & Seymour 5851-W – Frequently Asked Questions

1) Can I use the Pass & Seymour 5851W on a standard 120V circuit?
No. The 5851W is rated 20A at 250V, so it belongs on a two-pole 240V branch circuit feeding equipment like a window AC unit, compressor, or shop tool. Putting a 250V single receptacle on a 120V circuit is the wrong device. For 125V work, a heavy-duty duplex such as the Bryant 5362B (20A/125V) is the right family instead.
2) Is the 5851W a duplex or a single outlet?
Single. One 20A 250V outlet on the strap, which is what you want when a piece of equipment should have a dedicated 240V circuit and you do not want a second device sharing it. If you need two openings on one yoke, this is not the part.
3) Is this receptacle listed for code-compliant commercial work?
It carries a cULus Listing, covering both US and Canadian requirements, and it is built to spec grade with one-piece brass triple-wipe contacts. That is the grade inspectors and specifiers expect on commercial and industrial branch circuits.
4) Can I use the Pass & Seymour 5851W in a hazardous or explosionproof area?
The 5851W is a cULus Listed spec-grade receptacle intended for commercial and industrial power distribution in ordinary locations. For classified areas the comparable devices are the Appleton FSQC Series interlocked explosionproof receptacle and the Appleton U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set, a 3-pole device. Those are self-contained enclosed assemblies rather than a strap-mounted wiring device in a standard box.
5) Is a locking receptacle a substitute for the Pass & Seymour 5851W?
No. The 5851W is a straight-blade single receptacle rated 20A 250V with side wire termination. Locking devices such as the Bryant 70520FR flanged locking receptacle or the Eaton 7379 industrial locking receptacle, rated 50A at 600V/250V AC/DC, require a matching twist-lock plug on the cord. If the equipment cord has a straight-blade 250V plug, a locking device will not accept it.
6) What should I use instead of the Pass & Seymour 5851W if the circuit is 125V rather than 250V?
The 5851W is rated 20A 250V, so it does not belong on a 125V branch circuit. For a 20A 125V opening, the Bryant 5362B heavy-duty duplex receptacle is rated 20A/125V, as is the Bryant 5362BI heavy-duty duplex. Both are duplex devices rather than the single-outlet configuration of the 5851W, so a single 125V device will serve two cords per box instead of one.
7) Does the Pass & Seymour 5851W accept back wiring or is it side wire only?
Both. It is catalogued as a side wire device, and the internal screw-pressure-plate arrangement also takes back wire through two back wire holes. Terminal screws ship backed out so you are not spending time on each one in the box.
8) Will the 5851W hold up in an unheated warehouse or a hot mechanical room?
Continuous operating range runs from -40C up to +60C without impact, and temperature rise stays within 30C at full rated current after 50 cycles of 150 percent overload. The zinc-plated steel strap is corrosion resistant, which is the reason it gets specified in damp industrial space.
9) Do I still need a separate ground wire with the auto-ground clip on the 5851W?
The auto-ground clip gives positive ground through the mounting screw to a grounded metal box, but it does not remove the equipment grounding conductor from your circuit. Treat the clip as added assurance on metal box installs, not as a substitute for pulling ground.
10) We need a single receptacle but only 15A at 125V. What is the alternative to the 5851W?
The Eaton 816W commercial specification grade single receptacle is rated 15A and is a single-outlet device like the 5851W. Eaton also offers a heavy-duty industrial specification grade decorator single receptacle, the 6450W, which accepts #14-10 AWG conductors. The Pass & Seymour 5851W remains the choice when the load is 20A at 250V.
11) Is the Bryant 430R9W a substitute for the Pass & Seymour 5851W on a 250V motor circuit?
No. The Bryant 430R9W is a 2-pole 3-wire 277V motor-duty receptacle in the 4750DR series, a different voltage and configuration from the 20A 250V straight-blade 5851W. Match the receptacle to the nameplate voltage and plug configuration of the equipment; a 277V motor-duty device will not pair with a 250V cord cap.
12) How does the Pass & Seymour 5851W compare with the Eaton 5262W for a commercial receptacle spec?
The Eaton Arrow Hart 5262W is an industrial specification grade heavy-duty duplex rated 15A 125V in a 5-15R configuration, finished gray. The Pass & Seymour 5851W is a heavy-duty spec-grade single receptacle rated 20A 250V in white with a matte finish, side wire termination and an auto-ground clip. They serve different circuits: the Eaton for general-purpose 125V outlets, the P&S for a dedicated 250V piece of equipment.
13) What color and finish does the 5851W come in for matching devices across a building?
White, in a matte finish. Only one configuration is offered, model 5851W, so every unit matches across a floor or a portfolio without sorting through finish codes.
14) What is the exact part number and where is the Pass & Seymour 5851W made?
Order it as Pass & Seymour 5851-W. Country of origin is Mexico. A manufacturer spec sheet is published for the device if you need to attach documentation to a submittal package.
How fast can I get the Pass & Seymour 5851-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 5851-W come with a warranty?
Absolutely. The Pass & Seymour 5851-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 5851-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 5851-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!