Pass & Seymour IP67 IEC 4P5W 3...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$690.84
Image coming soon

Pass & Seymour IP67 IEC 4P5W 30A Pin & Sleeve Plug

(No reviews yet) Write a Review

Model: PS530P6W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$690.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour IP67 IEC 4P5W 30A Pin & Sleeve Plug

The Pass & Seymour IEC 4P5W 30A Pin & Sleeve Plug delivers a rugged, watertight connection for demanding power distribution applications. Configured as a 4-pole, 5-wire (4P5W) device rated 30A at 200/346–240/415V, this plug carries an IP67 ingress protection rating and is cULus Listed, making it suitable for heavy-duty industrial, construction, and temporary power environments where dust and water exposure are a concern. Finished in gray, this plug is built to the same demanding standards professionals expect from Pass & Seymour electrical products.

Key Features

  • Configuration: 4-pole, 5-wire (4P5W) IEC pin & sleeve design for balanced and grounded power distribution circuits.
  • Amperage Rating: Rated 30A for reliable performance under continuous industrial and commercial loads.
  • Voltage Rating: Rated 200/346–240/415V, supporting international and multi-voltage power distribution systems.
  • Ingress Protection: IP67 rated for protection against dust ingress and temporary immersion in water, ideal for wet and outdoor job-site conditions.
  • Color: Gray housing for high visibility and easy identification on job sites and in panel layouts.
  • Listing: cULus Listed, confirming the plug has been independently tested to recognized North American safety standards.

Certifications & Compliance

  • cULus Listed
  • IP67 Rated

Technical Specifications

  • Product Line: Pass & Seymour
  • Country of Origin: United States
  • Color: Gray
  • Configuration: 4P5W (4-Pole, 5-Wire)
  • Amperage Rating: 30A
  • Voltage Rating: 200/346-240/415V
  • Ingress Protection: IP67

Typical Applications

  • Industrial and Commercial Power Distribution
  • Temporary and Portable Power Installations
  • Outdoor and Wet-Location Job Sites
  • Construction and Special-Event Power Hookups
  • Marine and Heavy-Duty Equipment Power Connections

Why Pass & Seymour?

Pass & Seymour engineers devices built for the realities of demanding electrical environments, and this IEC 4P5W 30A pin & sleeve plug is no exception. With an IP67 ingress protection rating and cULus Listing, it delivers dependable, code-compliant performance for professionals who need secure power connections in wet, dusty, or otherwise challenging conditions. Choose Pass & Seymour for electrical components engineered for reliability on demanding job sites.

Manufacturer Resources

Product Specs

list_batch:
PASS-20260820
Product Type:
Pin and Sleeve Plug
Configuration:
4P5W
Amperage Rating:
30A
Voltage Rating:
200/346-240/415V
Listing:
cULus
Country Of Origin:
United States
Product Color:
Gray
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Pin & Sleeve Devices

Pass & Seymour PS530P6W – Frequently Asked Questions

1) What does 4P5W mean on the Pass & Seymour PS530P6W pin and sleeve plug, and what circuit does it suit?
4P5W means four poles plus a ground, so five wires total: three phase conductors, a neutral, and an equipment ground. On the PS530P6W that supports a grounded three-phase wye circuit where you need the neutral carried through, rated 200/346-240/415V. If your feed is three-phase with no neutral, you want a 3P4W device instead, not this one.
2) Can I use this 30A pin and sleeve plug outdoors in the rain or in a washdown area?
Yes. The PS530P6W carries an IP67 rating, which covers dust ingress and temporary immersion in water, so rain, washdown, and wet job site conditions are within its rating. It is also cULus Listed for North American installs. IP67 applies when the plug is mated or properly closed, not when it is sitting open and unconnected.
3) What else do I need to order to make up a complete pin and sleeve connection with this plug?
A plug is only the cord-end half. To land it you need a mating connector, receptacle, or inlet of the same rating and configuration: 30A, 4P5W, in the 200/346-240/415V gray band. IEC pin and sleeve devices only mate within the same amperage, pole count, and voltage keying, so a 3-pole or 60A mate will not engage the PS530P6W. You will also need suitable cord for the full 30A load.
4) How is this different from the Leviton 460P9WLEV pin and sleeve plug?
Different configuration. The Pass & Seymour PS530P6W is a 4-pole, 5-wire device rated 30A in the 200/346-240/415V band. The Leviton 460P9WLEV we carry is a 3-pole, 4-wire watertight IEC plug in the 600/250V class, listed as industrial grade. Those two will not mate with the same receptacle and are not interchangeable: pick by the pole count and voltage of your circuit, not by amperage alone.
5) Can a Leviton 460P9WLEV plug be used in place of the Pass & Seymour PS530P6W?
Not interchangeably. The Pass & Seymour PS530P6W is a 4P5W device, meaning four poles and five wires, rated 30A at 200/346-240/415V. The Leviton 460P9WLEV is a 4-wire 3-pole watertight IEC pin and sleeve plug, so it carries one less current-carrying conductor and will not mate with a 5-wire receptacle or terminate a 5-wire feeder. Match the pole and wire count to the circuit and to the mating connector body first; only then compare amperage and voltage.
6) What do I use for a three-phase circuit without a neutral instead of the 4P5W 30A pin and sleeve plug?
A 4P5W plug such as the Pass & Seymour PS530P6W is built for three-phase plus neutral plus ground, so on a three-phase feeder with no neutral the extra pole goes unused and the pin pattern will not match a 3-pole mating part. For that opening, a 3-pole 4-wire watertight IEC plug like the Leviton 460P9WLEV, an industrial grade device, is the configuration that lines up. Confirm the receptacle or connector on the other end of the circuit uses the same pole and wire count.
7) What part number do I order for the Pass & Seymour 30A IP67 4P5W plug?
Order Pass & Seymour MPN PS530P6W. It is a single configuration, so there are no finish or size options to specify: one 30A, 4P5W, gray, IP67 plug.
8) For a wet outdoor job site, how does the Pass & Seymour PS530P6W compare with the Leviton 460P9WLEV on environmental protection?
Both are watertight-style IEC pin and sleeve plugs intended for exposed service. The Pass & Seymour PS530P6W carries an IP67 ingress protection rating, which covers dust ingress and temporary immersion, and is cULus Listed. The Leviton 460P9WLEV is described as an industrial grade watertight IEC pin and sleeve device. If a specifier has called out IP67 on the drawing, the PS530P6W states that rating directly.
9) Is this plug suitable for temporary construction and event power, or is it only for fixed installations?
Temporary power is one of its main uses. The PS530P6W is a cord-mounted plug with an IP67 watertight rating, which is why it gets specified for construction feeders, special-event hookups, portable distribution, and heavy equipment connections as well as permanent industrial distribution. For a facility standardizing on one connector family, note the amperage and pole count have to match across every mating device you buy.
10) Is the Pass & Seymour PS530P6W made in the USA, and is it acceptable for a job with a domestic-sourcing requirement?
Country of origin on the PS530P6W is the United States. For procurement running Buy American or similar sourcing language, that is the figure on record, and it is cULus Listed for North American code acceptance. Confirm the specific program's content thresholds against the manufacturer's own documentation if your contract requires a certificate.
How fast can I get the Pass & Seymour PS530P6W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS530P6W come with a warranty?
Absolutely. The Pass & Seymour PS530P6W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS530P6W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS530P6W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!