Pass & Seymour L2130R 30A L213...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$130.84
Pass & Seymour L2130R 30A L2130 Single Receptacle, Black

Pass & Seymour L2130R 30A L2130 Single Receptacle, Black

(No reviews yet) Write a Review

Model: L2120-R

In Stock (leaves warehouse same day if ordered before 3pm ET)

$130.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour L2120R 20A 120/208V NEMA L2120 Single Receptacle, 5-Wire 3-Phase, Black, cULus Listed

The Pass & Seymour L2120R is a 20A 120/208V NEMA L2120 single receptacle engineered for 5-wire 3-phase electrical distribution in commercial and industrial power systems. Finished in black, this heavy-use device features one-piece, high-grade brass contacts and a solid brass mounting strap for long-term reliability under continuous load. The L2120R is cULus Listed and Federal Spec Listed, confirming it meets recognized safety and performance standards for demanding 3-phase power applications.

Key Features

  • NEMA Configuration: Wired for the 20A 120/208V NEMA L2120 5-wire 3-phase configuration, with the configuration, rating, and third-party listing clearly marked on the device face.
  • Durable Brass Contacts: One-piece, high-grade brass contacts offer excellent conductivity and heat-rise resistance for consistent performance under demanding loads.
  • Triple-Wipe Power Contacts: .032 inch thick, brass, triple-wipe power contacts provide lasting retention and a secure, low-resistance connection.
  • Back Wire Capability: Side and external screw-pressure-plate back wire capability simplifies termination and speeds installation.
  • Impact-Resistant Construction: Compact, impact-resistant nylon face and body are ultrasonically welded together for unrivaled strength and durability.
  • Solid Brass Mounting Strap: Single-piece, solid brass mounting strap is free of the easily loosened rivets found on other brands.
  • Finish: Matte black finish suited for professional electrical installations.

Certifications & Compliance

  • cULus Listed
  • Federal Spec Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 2.29 in
  • Product Line: Pass & Seymour
  • Product Width: 1.61 in
  • Product Depth: 1.19 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • 3-Phase Power Distribution Systems
  • Heavy-Duty Equipment and Machinery Connections
  • Panelboard and Load Center Wiring
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour builds the L2120R with one-piece, high-grade brass contacts, a solid brass mounting strap, and an ultrasonically welded, impact-resistant nylon face and body for dependable, code-compliant performance. Backed by cULus Listing and Federal Spec Listing, this NEMA L2120 receptacle is engineered to withstand the demands of professional 3-phase electrical installations.

Product Specs

Listing:
cULus
Product Type:
Locking Receptacle
Product Color:
Black
Department:
Electrical
Country of Origin:
Mexico
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Width:
1.61 in

Pass & Seymour L2120-R – Frequently Asked Questions

1) What NEMA configuration is the Pass & Seymour L2120R locking receptacle, and what kind of circuit does it serve?
The L2120R is wired for the NEMA L2120 configuration, 20A at 120/208V, 5-wire 3-phase. That means three hot legs, a neutral and a ground, so it suits wye 3-phase distribution for equipment that needs both 120V line-to-neutral and 208V line-to-line. It will not work on a single-phase circuit. The configuration, rating and third-party listing are marked on the device face.
2) Is the Pass & Seymour L2120 locking receptacle available in 30 amp as well as 20 amp?
Both amperages are offered. The 20A device is ordered as L2120-R and the 30A as L2130-R. Pick the one that matches the plug on your equipment and the branch circuit protection, since the 20A and 30A locking configurations are not interchangeable with each other.
3) Is there another locking receptacle to use instead of the Pass & Seymour L2120R when the equipment is single-phase at higher voltage?
The L2120R and L2130R are NEMA L2120 locking receptacles wired for 5-wire 3-phase 120/208V service at 20A and 30A. When the load is not 3-phase, the Eaton 7379 industrial locking receptacle is rated 50A, 600V/250V AC/DC in black and is built as an extra heavy duty device. Confirm the plug configuration on the equipment cord before choosing, since locking blade patterns are not interchangeable between configurations.
4) What should I install instead of a Pass & Seymour L2120R if the device is feeding ordinary 125V cord-connected equipment?
The L2120R is a locking single receptacle for 120/208V 3-phase distribution, so a straight-blade device is the right call for standard 125V equipment. The Bryant 5362B is a heavy-duty 20A/125V duplex receptacle, and the Leviton 16352-1PW is a commercial grade heavy-duty straight blade duplex rated 20A 125V NEMA 5-20R. Both accept a standard 5-20P cord cap rather than a twist-lock plug.
5) Can the Pass & Seymour L2120R be used in a hazardous or classified area?
The L2120R and L2130R are cULus Listed and Federal Spec Listed general-purpose industrial locking receptacles with a nylon face and body, not classified-location devices. For hazardous locations, the Appleton FSQC Series interlocked explosionproof receptacle and the Appleton U-Line ECS factory-sealed 3-pole plug and receptacle set are the devices built for that duty. Match the enclosure to the area classification on the electrical drawings.
6) Can I back wire the Pass & Seymour L2120R or do I have to use the side screws?
Either way works. The device takes side wiring or external screw-pressure-plate back wiring, so you can land conductors straight into the clamp and tighten from the side, which is faster in a crowded box with five conductors to terminate.
7) I need a 20A 125V outlet for general shop receptacles, not a 3-phase locking device. What should I look at instead?
The L2120R is a 3-phase locking device and the wrong part for ordinary 120V tool outlets. For straight-blade 20A 125V NEMA 5-20R work, look at the Leviton Decora Plus commercial grade duplex 16342, the Leviton commercial grade heavy-duty 16352-1PW, or the Bryant 5362B heavy-duty duplex. For a quad outlet in the same 5-20R pattern, the Bryant 21254IGO gives you four openings on one yoke.
8) What locking receptacle alternatives are there if I need higher voltage or a hazardous location?
For a higher-rated industrial locking outlet, the Eaton 7379 is a 50A locking receptacle rated 600V/250V AC/DC in black, extra heavy duty. For classified areas, neither that nor the L2120 series applies: use an explosionproof device such as the Appleton FSQC Series interlocked receptacle, or the Appleton U-Line ECS factory-sealed 15 and 20 amp 3-pole plug and receptacle set.
9) Is the Bryant 430R9W a substitute for the Pass & Seymour L2130R?
No. The Bryant 430R9W 4750DR is a 2-pole 3-wire 277V motor-duty receptacle, while the L2130R is a 30A NEMA L2130 device wired for 5-wire 3-phase 120/208V. The pole and wire counts and the voltage differ, so the plug on the equipment cord will not mate.
10) For a healthcare facility, can the Pass & Seymour L2120R serve patient-care area outlets?
The L2120R is an industrial locking receptacle for 3-phase power distribution and is cULus Listed and Federal Spec Listed, but hospital grade marking is a separate requirement. Where patient-care receptacles are specified, the Leviton 16262-HGW is a hospital grade duplex receptacle in white. The L2120R and L2130R remain appropriate for equipment and machinery connections elsewhere in the building.
11) I need more outlets per box than the Pass & Seymour L2120R provides - what are the options?
The L2120R is a single receptacle, one locking outlet per device. Where multiple standard outlets are wanted in one strap, the Bryant 21254IGO is a quad straight-blade receptacle, NEMA 5-20R, 20A. That change moves the opening from 120/208V 3-phase locking service to 125V straight-blade service, so it applies only where the load is standard cord-connected equipment.
12) What are the dimensions and color of the L2120R so I can check it against my device box and plate?
The body measures 2.29 in high, 1.61 in wide and 1.19 in deep, in a matte black finish. The compact body leaves room for the five conductors this configuration requires in a standard device box.
13) Is the L2120R a duplex or a single outlet?
Single. One L2120 locking opening per device, which is normal for 3-phase equipment drops where one machine gets one dedicated circuit. If you need two or more openings on a 120V circuit instead, a duplex such as the Leviton 16251W commercial grade straight blade receptacle is the different animal you want.
14) How does the Pass & Seymour L2120R compare to a commercial specification grade single receptacle?
The L2120R uses one-piece high-grade brass contacts, .032 inch triple-wipe power contacts, a single-piece solid brass mounting strap, and an ultrasonically welded nylon face and body, and is offered in 20A and 30A locking versions. The Eaton 816W-BOX is a commercial specification grade single receptacle rated 15A, and the Eaton 6450W is an industrial specification grade decorator single receptacle accepting #14-10 AWG. Those are straight-blade devices, so the choice follows the plug on the equipment as much as the grade.
15) Does the black finish on the Pass & Seymour L2120R limit where it can be used compared with white devices?
The L2120R and L2130R carry a matte black finish intended for professional electrical installations. Peer straight-blade devices are commonly specified in other colors - the Bryant 5362BI is a 20A/125V heavy-duty duplex, the Leviton 16342 is offered in white, and the Eaton 5262W in gray. Color is a cosmetic and identification choice; the deciding factors for the L2120R are the NEMA L2120 locking configuration and the 20A or 30A rating.
How fast can I get the Pass & Seymour L2120-R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour L2120-R come with a warranty?
Absolutely. The Pass & Seymour L2120-R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour L2120-R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour L2120-R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!