Pass & Seymour Pin & Sleeve Wa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$641.07
Pass & Seymour Pin & Sleeve Watertight 60A 3ø 480V Connector

Pass & Seymour Pin & Sleeve Watertight 60A 3ø 480V Connector

(No reviews yet) Write a Review

Model: PS460C7-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$641.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour Pin & Sleeve Watertight 60A 3ø 480V Connector

The Pass & Seymour Pin & Sleeve Watertight Connector is a three pole, four wire device rated 60A, 3ø/480V, engineered for reliable power transfer in demanding industrial and outdoor environments. Built with high-impact, corrosion-resistant nylon housings and nickel-plated brass pins, this connector delivers durable electrical conductivity while a locking ring with integral neoprene gasket provides a watertight seal when mated to a matching plug or receptacle. The unit is cULus Listed and engineered for guaranteed IEC 309 compatibility.

Key Features

  • Electrical Rating: 60A, three pole, four wire, 3ø/480V configuration for demanding power distribution applications.
  • Durable Construction: High-impact, corrosion-resistant nylon housing withstands harsh jobsite and industrial conditions.
  • Watertight Sealing: Locking ring with integral neoprene gasket creates a watertight seal when the plug and connector/receptacle are mated.
  • Nickel-Plated Brass Pins: Deliver extra corrosion resistance without sacrificing electrical conductivity.
  • Ready to Wire: Arrives with cord grip open and cable-ready; terminal screws are backed out and front/back body require no disassembly prior to assembly.
  • Combination-Head Screws: Added convenience and quick installation.
  • Watertight Cover: Integral neoprene gasket on the cover provides an additional watertight seal.
  • Natural-Rubber Grommets: Provide watertight protection at the cable entry point.
  • Hinged Cord Grip: Revolutionary hinged design for durable performance and ease of installation.

Certifications & Compliance

  • cULus Listed
  • Guaranteed IEC 309 Compatibility

Technical Specifications

  • Color: Gray
  • Product Line: Pass & Seymour
  • Country of Origin: United States
  • Packaging: 1 EA

Typical Applications

  • Industrial and Commercial Power Distribution
  • Portable and Temporary Power Connections
  • Wet and Outdoor Electrical Installations
  • Heavy-Duty Equipment and Machinery Connections
  • Construction Site and Jobsite Power Runs

Why Pass & Seymour?

Pass & Seymour Pin & Sleeve devices, part of the Legrand family of products, combine high-impact nylon construction, nickel-plated brass pins, and watertight neoprene sealing to deliver enduring performance in harsh conditions. With cULus Listing and guaranteed IEC 309 compatibility, this connector offers installation ease and code-compliant reliability for professional electrical work.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Pin and Sleeve Connector
Voltage Rating:
480V
Amperage Rating:
60A
Configuration:
3-Pole 4-Wire
Listing:
cULus
Country Of Origin:
United States
Product Material:
Nylon
Product Color:
Gray
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Pin & Sleeve Devices

Pass & Seymour PS460C7-W – Frequently Asked Questions

1) Will the Pass & Seymour PS460C7-W pin and sleeve connector work on a 480V three-phase feed?
That's exactly what it's built for. The PS460C7-W is rated 60A at 480V, three phase, in a 3-pole 4-wire configuration, so you get three hot legs plus a ground. It is not a 4-pole 5-wire device, so if your equipment needs a separate neutral in addition to the three phases, this is the wrong configuration.
2) What is the difference between a pin and sleeve connector and a receptacle, and which one do I need?
A connector is the female end that goes on a cord, the piece you wire to a length of portable cable and plug onto a device's plug. The PS460C7-W is that cord-mounted female half. A receptacle is the fixed half mounted in a box or on a wall. If you are building or repairing a 60A 480V extension assembly or feeding portable equipment, the connector is the end you want; if you are mounting power at a panel or column, order the receptacle instead.
3) Will this Pass & Seymour 60A connector mate with another brand's IEC 309 pin and sleeve plug?
Yes. The PS460C7-W is built to guaranteed IEC 309 compatibility, so it mates with an IEC 309 plug or receptacle of the same 60A 480V three-phase 3-pole 4-wire configuration regardless of who made it. Configuration and voltage code have to match, not just the amp rating, pin and sleeve bodies are keyed by voltage class.
4) Can I use this connector outdoors or in a washdown area?
Yes. Sealing is the point of this device. The locking ring carries an integral neoprene gasket that makes a watertight seal once mated to a plug or receptacle, the cover has its own neoprene gasket, and natural rubber grommets seal the cable entry. The nylon housing is high impact and corrosion resistant, and the pins are nickel plated brass for added corrosion resistance. It is used on construction site power runs, wet and outdoor installs, and temporary power.
5) Can a NEMA 5-15R or 5-20R straight blade connector be used in place of the Pass & Seymour PS460C7-W?
No. The PS460C7-W is a pin and sleeve connector rated 60A, 480V in a 3-pole 4-wire configuration, which is a three-phase power connection. Straight blade cord connectors such as the Eaton Arrow Hart 1547 severe duty NEMA 5-15R or the Leviton 8319-C hospital grade NEMA 5-20R are single-phase 125V devices with flat blade contacts and no pin and sleeve interface. They will not mate with the PS460C7-W and are not rated for its voltage or current. For a 60A three-phase 480V cord end, stay with a pin and sleeve device of the same rating and configuration.
6) Does this pin and sleeve connector come ready to wire or do I have to take it apart first?
It arrives ready to wire. The cord grip ships open and cable ready, the terminal screws are already backed out, and the front and back body do not need to be disassembled before you make up the cable. Screws are combination head, and the cord grip uses a hinged design. No separate cord grip or gland to buy.
7) How is a pin and sleeve device different from the straight blade connectors we normally stock?
Straight blade devices like the Leviton 15W33 industrial grade 2-pole 3-wire 125V 20A connector or the Eaton Arrow Hart severe duty 15A 125V NEMA 5-15R are 120V general purpose cord ends. Pin and sleeve is a different animal: the PS460C7-W handles 60A at 480V three phase, uses round pins in sleeves instead of flat blades, and seals with a threaded locking ring for watertight service. You cannot substitute one for the other, the configurations and ratings do not overlap.
8) Which connector holds up better in a wet outdoor location - the Pass & Seymour PS460C7-W or a severe duty straight blade connector?
Both are built for exposure, but they differ in how they seal and what they carry. The PS460C7-W uses a locking ring with an integral neoprene gasket to form a watertight seal when mated, plus natural-rubber grommets at the cable entry and a gasketed cover, in a corrosion-resistant nylon body with nickel-plated brass pins at 60A 480V. The Eaton Arrow Hart 1547 is a severe duty grade straight blade connector for 15A 125V cord circuits. Choose by the circuit: three-phase 480V equipment feeds take the pin and sleeve device, 125V cord drops take the straight blade connector.
9) What color is the Pass & Seymour PS460C7-W, and does the color mean anything on pin and sleeve gear?
Gray. On IEC 309 pin and sleeve devices the housing color flags the voltage class, and gray is the 480V band, which matches this connector's 480V rating. Keeping colors consistent across a facility helps crews spot a mismatched voltage before they try to mate two bodies.
10) Is the Pass & Seymour PS460C7-W made in the USA?
Yes, country of origin is the United States. It is a Pass & Seymour device, part of the Legrand family, which matters on projects carrying domestic sourcing language.
How fast can I get the Pass & Seymour PS460C7-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS460C7-W come with a warranty?
Absolutely. The Pass & Seymour PS460C7-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS460C7-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS460C7-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!