Pass & Seymour PS-30SS Non-Fus...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$371.30
Pass & Seymour PS-30SS Non-Fusible Safety Switch, NEMA 4X Valox Enclosure

Pass & Seymour PS-30SS Non-Fusible Safety Switch, NEMA 4X Valox Enclosure

(No reviews yet) Write a Review

Model: PS30-SS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$371.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Pass & Seymour PS-30SS Non-Fusible Safety Switch, NEMA 4X Valox Enclosure

The Pass & Seymour Non-Fusible Safety Switch is the first non-metallic NEMA 4X non-fusible safety switch line UL Listed as suitable for use as a motor disconnect per NEC Article 430.109(A)(6). This family is available in Motor FLA options ranging from 30A to 60A, all rated 600 VAC, so electrical professionals can size the disconnect to the exact motor application while standardizing on the same rugged Valox enclosure. Its impact-resistant, nonconductive Valox thermoplastic housing is watertight, corrosion-, heat-, and impact-resistant, delivering safe, sure operation under the worst industrial conditions. The design is certified for IP69 wash-down applications and carries cULus Listing for reliable, code-compliant performance across the entire 30A-60A range.

Key Features

  • Non-Metallic NEMA 4X Enclosure: Impact-resistant Valox thermoplastic enclosure ensures NEMA 4X and 12 ratings and withstands harsh industrial environments across every Motor FLA option.
  • Electrical Rating: 600 VAC, with Motor FLA options spanning 30A to 60A for reliable motor disconnect switching sized to the application.
  • IP69 Certified: Watertight design certified for IP69 wash-down applications, shared across the family.
  • Bottom and Top Wiring Access: Flexible wiring options with no unnecessary openings to compromise water resistance.
  • Stainless Steel Captive Screws: Corrosion-resistant captive screws speed installation and minimize risk of lost parts.
  • Compact, Versatile Design: Fits in most I-beams and adjustable mounting feet allow instant strut- or pole-mounting.
  • Ergonomic Switch Handle: Heavy-duty handle meets OSHA Lockout/Tagout provisions with black/red color coding and high-visibility ON/OFF markings.
  • Top Mount Auxiliary Contact: Enables additional control functions or signal lights, with a stainless steel cover-retaining chain for convenient maintenance.

Certifications & Compliance

  • cULus Listed
  • NEMA 4X and NEMA 12 Rated Enclosure
  • IP69 Certified
  • UL Listed as Suitable for Use as Motor Disconnect per NEC Article 430.109(A)(6)

Technical Specifications

  • Motor FLA Options: 30A - 60A
  • Voltage Rating: 600VAC
  • Material: Valox
  • Finish: Matte
  • Color: Gray
  • Product Line: Pass & Seymour
  • Country of Origin: United States

Typical Applications

  • Motor Disconnect Switching
  • Industrial and Commercial Electrical Installations
  • Outdoor and Harsh, Wash-Down Environments
  • Strut- or Pole-Mounted Disconnect Applications
  • Panelboard and Motor Control Disconnects

Why Pass & Seymour?

Pass & Seymour builds its Non-Fusible Safety Switch family with an impact-resistant, nonconductive Valox enclosure, stainless steel captive hardware, and an ergonomic OSHA-compliant handle for dependable performance in the toughest industrial settings, no matter which Motor FLA option you select. Backed by cULus Listing and NEMA 4X/12 and IP69 ratings, this switch delivers safe, code-compliant motor disconnect performance for electrical professionals who need equipment that holds up to water, corrosion, and impact across the full 30A to 60A range.

"

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Safety Switch
Product Finish:
Matte
Voltage Rating:
600VAC
Listing:
cULus
Country Of Origin:
United States
Product Material:
Valox
Product Color:
Gray
Department:
Electrical
Product Group:
Power Distribution
Product Subgroup:
Safety Switches & Disconnects

Pass & Seymour PS30-SS – Frequently Asked Questions

1) Can the Pass & Seymour PS-30SS be used as the motor disconnect required by code, or do I need a separate rated switch?
It can serve as the disconnecting means. The Pass & Seymour non-fusible safety switch is UL Listed as suitable for use as a motor disconnect per NEC Article 430.109(A)(6), and it is cULus Listed. The handle meets OSHA Lockout/Tagout provisions with black/red coding and ON/OFF markings, so it also covers the lockable-disconnect requirement at the equipment.
2) Which amp rating of the Pass & Seymour PS-SS safety switch do I order for my motor?
Two Motor FLA ratings are offered: 30A (PS30-SS) and 60A (PS60-SS). Both are rated 600 VAC and share the same Valox enclosure, so you size to the motor full-load amps and keep the same housing across the job.
3) Will a non-metallic safety switch hold up to wash-down and corrosive outdoor environments?
That is what this one is built for. The enclosure is Valox thermoplastic, nonconductive and impact resistant, rated NEMA 4X and NEMA 12 and certified for IP69 wash-down. Wiring access is top and bottom only, with no extra openings to break water resistance, and the captive cover screws are stainless steel so they survive corrosive duty.
4) Is the PS-30SS fusible or non-fusible, and does that affect my overcurrent protection?
It is a non-fusible switch, so it disconnects only and carries no fuses. Overcurrent protection has to come from upstream breakers or a fused device. If you need the protection at the disconnect itself, a fusible unit such as the ABB TC-72367 Spec-Setter heavy-duty fusible switch or the Square D VisiPacT fused safety switch in NEMA 4X stainless is the direction to go.
5) What is the closest NEMA 4X alternative to the Pass & Seymour PS-30SS safety switch?
The Pass & Seymour PS-30SS uses a non-metallic Valox enclosure rated NEMA 4X and NEMA 12 with IP69 wash-down certification, at 600 VAC. If a metallic NEMA 4X housing is preferred for the same wet or corrosive location, the Square D VisiPacT heavy duty fused safety switch VH324NDSGL is a NEMA 4X stainless steel unit. The key difference is that the Square D unit is fused while the Pass & Seymour switch is non-fusible, so overcurrent protection has to come from upstream in the Pass & Seymour installation.
6) I need a non-fusible disconnect larger than 60A - what should I use instead of the Pass & Seymour PS-30SS?
The Pass & Seymour non-fusible safety switch family tops out at a 60A Motor FLA option (MPN PS60-SS). For a much larger non-fusible disconnect, the Eaton DH366URK is a 600A K Series non-fusible safety switch in a NEMA 3R enclosure. Note the Eaton NEMA 3R rating is for rain and sleet rather than the NEMA 4X and IP69 wash-down duty the Valox Pass & Seymour enclosure is certified for.
7) If my motor circuit needs fuses in the disconnect, what replaces the Pass & Seymour PS-30SS?
The Pass & Seymour PS-30SS is a non-fusible switch, so it provides disconnecting means only. Fusible options at the same 600 V class include the ABB TC-72367 Spec-Setter heavy-duty fusible switch, a 3-pole 600 V AC unit in a NEMA 1 enclosure, and the ABB TG-Series Spec-Setter general duty fusible switch. Both ABB units are steel-enclosure designs; the NEMA 1 rating on the TC-72367 is for indoor dry locations, unlike the NEMA 4X/IP69 Valox housing on the Pass & Seymour.
8) Can I use the Pass & Seymour PS-30SS for a generator or two-source transfer application?
No. The Pass & Seymour PS-30SS is a single-throw non-fusible motor disconnect UL Listed for use per NEC Article 430.109(A)(6). For switching a load between two sources, use a double-throw device such as the Eaton DT-223UGK heavy-duty double-throw non-fused safety switch, which comes in a painted steel NEMA 1 enclosure.
9) Can this safety switch be mounted to strut or a pole instead of a wall?
Yes. The adjustable mounting feet allow strut or pole mounting straight out of the box, and the compact body fits in most I-beams. That is handy for rooftop and mechanical-room disconnects where there is no flat wall near the motor.
10) Is a 600V non-fusible switch acceptable on a 480V or 208V three-phase motor circuit?
Yes. The switch is rated 600 VAC, which covers common commercial and industrial systems at or below that, including 480V and 208V. Match the Motor FLA rating, 30A or 60A, to the motor instead.
11) I need a non-fused disconnect bigger than 60A. What else is there?
The Pass & Seymour non-metallic line tops out at 60A Motor FLA. For larger non-fused service, the Eaton DH366URK K Series non-fusible switch is rated 600A in a NEMA 3R enclosure, and the ABB THN3365A is a 400A 3-pole 600V heavy-duty switch. Note those are metal enclosures and 3R is rainproof rather than 4X washdown.
12) What is the difference between the Pass & Seymour PS-30SS and the ABB THN3365A?
Both are 600 V class disconnects, but they serve very different loads. The ABB THN3365A is a 400A 3-pole 600 V heavy-duty safety switch. The Pass & Seymour non-fusible switch is offered in 30A and 60A Motor FLA options at 600 VAC in a Valox non-metallic NEMA 4X enclosure sized to fit most I-beams and strut mounting, making it the choice for individual motor disconnects at the equipment rather than a large feeder.
13) Can I add a pilot light or control contact to the Pass & Seymour PS-SS disconnect?
There is a top mount auxiliary contact provision for additional control functions or signal lights. The cover also has a stainless steel retaining chain, so it stays with the box during maintenance.
14) What does the Pass & Seymour PS-30SS look like once installed, and where is it made?
Gray with a matte finish, with a heavy-duty handle marked ON/OFF in black and red for visibility across a plant floor. Country of origin is the United States.
How fast can I get the Pass & Seymour PS30-SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS30-SS come with a warranty?
Absolutely. The Pass & Seymour PS30-SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS30-SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS30-SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!