Pass & Seymour SP2262W Four-Ga...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$91.21
$46.13
Pass & Seymour SP2262W Four-Gang Combination Wallplate, 2 Toggle Switch and 2 Decorator Openings, White

Pass & Seymour SP2262W Four-Gang Combination Wallplate, 2 Toggle Switch and 2 Decorator Openings, White

(No reviews yet) Write a Review

Model: SP2262-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$91.21
$46.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour SP2262W Four-Gang Combination Wallplate, 2 Toggle Switch and 2 Decorator Openings, White

The Pass & Seymour SP2262W is a four-gang combination wallplate featuring two toggle switch openings and two decorator openings, finished in White. Molded from non-combustible, mar-proof thermoset plastic with a nominal thickness of .070 inch, this wallplate is CSA Listed and UL Listed for reliable, code-compliant performance. Each plate is individually wrapped with color-matching screws for a clean, professional installation.

Key Features

  • Combination Openings: Four-gang configuration with 2 toggle switch and 2 decorator openings for mixed-device installations.
  • Durable Construction: Molded of non-combustible, mar-proof thermoset plastic for long-lasting performance.
  • Nominal Thickness: .070 inch for a consistent, low-profile fit.
  • Color-Matched Hardware: Individually wrapped with color-matching screws for a finished look.
  • Stain & Chemical Resistance: Resistant to discoloration, grease, oil, solvent, and moisture for lasting appearance.
  • Finish: Matte White finish complements a wide range of decor.
  • Compact Footprint: Measures 8.125 in wide by 4.5 in high by 0.2 in deep.

Certifications & Compliance

  • CSA Listed
  • UL Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 4.5 in
  • Product Line: Pass & Seymour
  • Product Material: Thermoset Plastic
  • Product Width: 8.125 in
  • Product Depth: 0.2 in

Typical Applications

  • Residential and Commercial Wall Device Covers
  • Mixed Toggle Switch and Decorator Device Installations
  • New Construction and Renovation Wiring Projects
  • Multi-Gang Switch and Receptacle Combinations

Why Pass & Seymour?

Pass & Seymour builds wallplates from non-combustible, mar-proof thermoset material that resists discoloration, grease, oil, solvent, and moisture, and backs the SP2262W with CSA and UL listings. That combination of durable construction and independent certification makes it a dependable choice for professional electrical installations.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Wallplate
Product Material:
Thermoset Plastic
Product Color:
White
Configuration:
Four Gang
Product Finish:
Matte
Listing:
UL Listed
Standards:
CSA
Country of Origin:
Mexico
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates

Pass & Seymour SP2262-W – Frequently Asked Questions

1) What device layout does the Pass & Seymour SP2262W four-gang wallplate cover?
The SP2262W covers four gangs in a fixed order: two toggle switch openings and two decorator (rocker/GFCI style) openings. It won't work if your box has three toggles and one decorator, or any other mix. Count the devices left to right in the box before you order, because the openings are molded in place and can't be rearranged.
2) Is the SP2262W wallplate UL Listed for commercial work?
UL Listed and CSA Listed, both. That covers the usual inspection requirement on commercial and institutional jobs in the US and Canada, and the plate is molded from non-combustible thermoset plastic rather than a soft thermoplastic.
3) I have two toggles and two GFCI receptacles in one four-gang box. Is this the right plate?
Yes, that's exactly the case this plate is built for. GFCI and decorator/rocker devices use the same rectangular opening, so the two decorator cutouts on the SP2262W drop over GFCI receptacles, decorator rockers, dimmers, or decorator-style USB chargers. The other two openings take standard toggle switches.
4) I only need to cover one switch, not four devices - what should I use instead of the SP2262W?
The SP2262W is a four-gang plate with two toggle switch and two decorator openings, so it is oversized for a single device. For a one-gang opening, the Bryant NP26W in the HWS series and the Bryant P8 series one-gang duplex wallplate are single-gang plates, and the Mulberry 86401 in the 8640 Series is a one-gang steel wallplate in White. Choose the duplex or toggle style to match the device in the box.
5) Does the SP2262W come with mounting screws?
Yes. Each plate ships individually wrapped with color-matching screws, so the heads blend into the white face rather than showing as bare metal. Nothing else is needed to hang it on the devices already in the box.
6) Will this white plate hold its color in a kitchen or mechanical room?
Thermoset plastic is used here specifically because it resists discoloration along with grease, oil, solvent and moisture, which is what wears out cheaper plates in commercial kitchens and shops. The finish is matte white, not gloss, so it hides fingerprints and doesn't shine under overhead lighting.
7) Plastic or metal wallplate for a four-gang combination?
The Pass & Seymour SP2262W is thermoset plastic at .070 in nominal thickness, matte white, and is the usual pick where you want the plate to disappear into painted drywall. Where the spec calls for steel, ZenSupply carries Mulberry's cold rolled steel combination plates, the 76432 in the 764 Series and the 76532 in the 765 Series, both white 2-gang combinations. Those are two-gang, so they don't substitute one-for-one on a four-gang box.
8) Will the Mulberry 76532 work as a drop-in replacement for a Pass & Seymour SP2262W?
No. Both are combination wallplates, but the SP2262W is a four-gang plate with two toggle and two decorator openings measuring 8.125 in wide by 4.5 in high, while the Mulberry 76532 in the 765 Series is a two-gang combination plate. The screw pattern and overall width will not line up with a four-gang device strap arrangement. The 76532 is the right call only if the box itself is two-gang.
9) I need a wallplate for a data or voice jack, not switches - is the SP2262W the wrong part?
Yes, it is the wrong part for that. The SP2262W has only toggle switch and decorator device openings and no communications provision. For a telecom drop, the Eaton 35324W is a wallplate with a 4-conductor data/voice modular jack, Type 625B4, built into the plate itself. Use the SP2262W for the line-voltage switch and decorator devices and the Eaton plate at the jack location.
10) Can I use one SP2262W instead of stacking single-gang plates side by side?
That's the point of it. Four separate single-gang plates on one box leave visible seams and never line up perfectly; the SP2262W is one molded piece across all four devices. If you're covering single devices elsewhere in the same building, ZenSupply stocks one-gang options like the Bryant P8 Series duplex plate and the Bryant NP26W in the HWS Series.
11) Is there a spec sheet for the SP2262W I can submit?
Yes, Pass & Seymour publishes a PDF spec sheet for the SP2262W, and it's linked on the product record for submittal packages.
12) Is there a larger-size wallplate option if the SP2262W does not cover the wall opening?
The SP2262W is a standard-size plate at 8.125 in wide by 4.5 in high with a nominal .070 in thickness, so it leaves little margin around a rough opening. Where extra coverage is needed, the Bryant PJ series is an M-size wallplate for wiring devices, which runs oversized relative to standard plates. Confirm the PJ configuration matches your device mix, since the SP2262W combination of two toggle and two decorator openings is specific.
13) For a commercial corridor where plates take abuse, how does the SP2262W compare to a steel plate?
The SP2262W is molded non-combustible, mar-proof thermoset plastic that resists discoloration, grease, oil, solvent, and moisture, and it is CSA and UL Listed. A steel alternative such as the Mulberry 86401 8640 Series one-gang plate or the Mulberry 76432 764 Series two-gang combination plate, both White, gives you a cold rolled steel body instead of a molded one. The trade-off is device coverage: neither Mulberry plate carries the four-gang two-toggle, two-decorator layout of the SP2262W.
14) Where is the Pass & Seymour SP2262W made?
Mexico. That matters on public and institutional jobs with country-of-origin reporting requirements, so it's worth noting on the submittal.
How fast can I get the Pass & Seymour SP2262-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour SP2262-W come with a warranty?
Absolutely. The Pass & Seymour SP2262-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour SP2262-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour SP2262-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!