Pass & Seymour SS2 2-Gang Togg...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$65.66
$11.47
Pass & Seymour SS2 2-Gang 302/304 Stainless Steel Wall Plate, Toggle Switch Openings

Pass & Seymour SS2 2-Gang Toggle Switch Wall Plate, 302/304 Stainless Steel

(No reviews yet) Write a Review

Model: SS2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$65.66
$11.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour SS2 2-Gang Toggle Switch Wall Plate, 302/304 Stainless Steel

The Pass & Seymour SS2 is a 2-Gang wall plate with toggle switch openings, machined from 302/304 stainless steel at .032" nominal thickness for a non-magnetic, corrosion-resistant cover plate. Finished with a brushed surface and backed by cULus Listing, the SS2 is built for industrial, institutional, and commercial environments where standard plastic plates fall short. Its stainless alloy construction resists corrosive atmospheres found in food processing plants, dairies, and chemical facilities while maintaining a clean, professional appearance for switch locations.

Key Features

  • Configuration: 2-Gang wall plate with toggle switch openings for dual-switch installations.
  • Durable Construction: Type 302/304 stainless steel, non-magnetic, at .032" nominal thickness, containing 18% chromium and 8% nickel for superior corrosion resistance.
  • Finish: Brushed finish that is also paintable to match plastic plates for coordinated installations.
  • Corrosive-Environment Ready: Recommended for food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist.
  • Finish-Matching Hardware: Packaged in protective film with finish-matching screws included.
  • Customizable: Can be silk-screened or engraved, and custom punched with over 300 opening styles to fit specific device requirements.
  • Expanded Sizing Options: Part of a family that includes Standard, Jumbo, and Tandem plates, plus special Panel plates up to 5-gangs high and 10-gangs wide.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: United States
  • Product Finish: Metallic
  • Product Height: 4.5 in
  • Product Line: Pass & Seymour
  • Product Width: 4.56 in
  • Product Depth: 0.2 in

Typical Applications

  • Food Processing Plants and Dairies
  • Chemical Plants and Corrosive-Atmosphere Facilities
  • Industrial and Institutional Toggle Switch Installations
  • Commercial Buildings Requiring Durable Cover Plates
  • Renovation and New Construction Wiring Device Upgrades

Why Pass & Seymour?

Pass & Seymour engineers the SS2 from non-magnetic 302/304 stainless steel with a brushed finish, giving specifiers a cULus Listed wall plate that stands up to the corrosive atmospheres common in food, dairy, and chemical processing environments. With finish-matching screws, protective packaging, and support for custom punching and engraving, the SS2 delivers the reliable, code-compliant performance professionals expect from Pass & Seymour electrical products.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Toggle Wallplate
Product Material:
Stainless Steel
Product Finish:
Brushed
Configuration:
2-Gang
Listing:
cULus
Country of Origin:
United States
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates
Product Width:
4.56 in
Product Height:
4.5 in
Product Color:
Stainless Steel
Product Depth:
0.2 in

Pass & Seymour SS2 – Frequently Asked Questions

1) Will the Pass & Seymour SS2 cover two standard toggle switches in a 2-gang box?
That is exactly what it's cut for: a 2-gang plate with two toggle switch openings, sized for a pair of standard toggle (snap) switches side by side. It measures 4.5 x 4.56 x 0.2 inches overall, which is standard-size, not jumbo, so it will not hide an oversized wall cutout. If one of the two devices is a decorator/rocker or a receptacle instead of a toggle, this plate won't fit that opening.
2) What should I use instead of the SS2 if one opening is a switch and the other is a receptacle?
A combination plate, not the SS2, since both of its openings are toggle cuts. Mulberry's 76432 (764 Series) and 76532 (765 Series) are 2-gang combination wallplates in cold rolled steel, white, and the Cooper 2138WBOX is a thermoset combination plate in white. If the layout has to be stainless, the Pass & Seymour family supports custom punching for the exact device mix.
3) What is a 2-gang alternative to the Pass & Seymour SS2 stainless steel toggle plate for a dry office corridor where stainless is not needed?
The Leviton PJ2-E is a 2-gang midway wallplate in thermoplastic nylon, commercial grade. The Pass & Seymour SS2 is 2-gang in 302/304 stainless steel with a brushed finish and is recommended for corrosive atmospheres such as food processing plants and chemical plants. In an interior office corridor with no corrosive exposure, the thermoplastic nylon plate covers the same 2-gang opening; where washdown or chemical atmospheres are present, the stainless alloy construction is the reason to stay with the SS2.
4) Is the Mulberry 76432 a direct substitute for the Pass & Seymour SS2?
No. Both are 2-gang metal plates, but the Mulberry 76432 is a 764 Series cold rolled steel 2-gang combination wallplate in white, and a combination plate carries mixed device openings rather than two toggle switch openings. The Pass & Seymour SS2 has toggle switch openings for dual-switch installations and is 302/304 stainless steel with a brushed finish. If both devices behind the plate are toggle switches, the SS2 opening pattern is the one that fits.
5) Can I use a Cooper 2138WBOX in place of the Pass & Seymour SS2 in a dairy washdown area?
The Cooper Wiring Devices 2138WBOX is a 21 Series thermoset combination wallplate in white. The Pass & Seymour SS2 is 302/304 stainless steel containing 18 percent chromium and 8 percent nickel, cULus listed, and specifically recommended for food processing plants, dairies, and chemical plants. For a dairy washdown location with two toggle switches, the stainless construction and toggle opening pattern of the SS2 are the deciding differences.
6) Do I need to buy screws separately for the SS2 stainless plate?
No. The SS2 ships with finish-matching screws and comes wrapped in a protective film so the brushed face isn't scratched before install. Nothing else is required to mount it to the switch yokes.
7) Can stainless switch plates be labeled or engraved for machine and lighting circuits?
Yes. The SS2 can be silk-screened or engraved, which is how most plants mark switch legends in production areas. Pass & Seymour also custom punches this family with over 300 opening styles if your device combination isn't a standard two-toggle layout. For a ready-made legend plate on a single switch, Mulberry's 41020 comes marked Gas Burner in red.
8) Is the SS2 wall plate UL listed for commercial and institutional jobs?
The SS2 carries a cULus Listing, which covers both US and Canadian requirements for the inspector. It's made in the United States.
9) I need more than two gangs in stainless. What are my options?
The SS2 itself is strictly 2-gang. The same Pass & Seymour stainless family runs in Standard, Jumbo, and Tandem sizes, plus special Panel plates up to 5 gangs high and 10 gangs wide for gang boxes and control panels. For a 3-gang in painted steel rather than stainless, the Mulberry 76103 Princess-size 3-gang plate is an option, though it's punched for three duplex receptacles, not switches.
10) What should I use instead of the Pass & Seymour SS2 if the box only has one toggle switch?
The Cantex 5133330 is a PVC single toggle switch wallplate, which covers a 1-gang toggle opening. The Pass & Seymour SS2 is a 2-gang plate with toggle switch openings and will not match a single-device box. For a 1-gang toggle in a corrosive or industrial location, the SS2 belongs to a stainless family that includes Standard, Jumbo, and Tandem plates, so a matching single-gang stainless plate is the finish-consistent route.
11) How does the Pass & Seymour SS2 differ from the Leviton PJ23 blank plate?
The Leviton PJ23-E is a 2-gang blank wallplate in thermoplastic nylon, commercial grade, midway size, box mount - it has no device openings and is used to close off an unused box. The Pass & Seymour SS2 is a 2-gang plate with toggle switch openings in 302/304 stainless steel. They share the 2-gang footprint only; the PJ23-E covers, the SS2 passes two toggle handles through.
12) I need three gangs instead of two - is the Eaton 7729V-SP an option alongside the Pass & Seymour SS2?
The Eaton 7729V-SP is a decorator triple-gang wallplate cover, so it suits a 3-gang box with decorator-style devices rather than toggle switches. The Pass & Seymour SS2 is 2-gang with toggle switch openings. If the devices are toggles and you need more than two gangs, the SS2 belongs to a stainless family that includes special Panel plates up to 5 gangs high and 10 gangs wide.
13) Would a Mulberry 41020 work where I am specifying Pass & Seymour SS2 plates?
The Mulberry 41020 is a 4102 Series gas burner red 1-gang toggle switch plate, intended to flag a specific switch function with color coding on a single-device box. The Pass & Seymour SS2 is a 2-gang brushed stainless toggle plate. Note that the SS2 can be silk-screened or engraved, which is the way to identify switch function while keeping the stainless finish consistent across a facility.
14) How thick is the stainless on the Pass & Seymour SS2, and will it sit flat against the wall?
.032 inch nominal stainless, with an overall plate depth of 0.2 inch. That gauge is stiff enough to stay flat over a 2-gang box without oil-canning, but thin enough to sit tight against the wall surface rather than standing off like a cast or heavy steel cover.
15) Can I paint a stainless steel wall plate to match the painted plates elsewhere in the building?
The brushed stainless face on the SS2 is paintable, so it can be finished to match adjacent plastic plates where a property manager wants one consistent look across a floor. Left unpainted it reads as a brushed metallic finish.
16) What is the exact part number to order this stainless 2-gang toggle plate?
Pass & Seymour SS2. One configuration only, 2-gang toggle in brushed 302/304 stainless, so there's no finish or size option to specify when you order.
17) Is a Leviton 16252 Decora plate interchangeable with the Pass & Seymour SS2?
No. The Leviton 16252 is a Decora single-gang device wallplate, supplied in a pack of 100, and the Decora opening accepts a rocker-style device on one gang. The Pass & Seymour SS2 is a 2-gang plate with toggle switch openings, so it fits two standard toggle handles. The device style and gang count both differ, and neither plate will mount over the other's devices.
18) For a commercial-grade 1-gang toggle location, what is comparable to the Pass & Seymour SS2 line?
The Leviton 80704 is a thermoplastic nylon device mount commercial grade 1-gang wallplate in gray, which addresses a single-device commercial opening in plastic. The Pass & Seymour SS2 is a 2-gang stainless plate and is cULus listed, with finish-matching screws included. Choose on gang count first, then on whether the location sees corrosive atmospheres, which is where the SS2 stainless alloy is intended.
19) Will an Eaton 35324W cover the same opening as the Pass & Seymour SS2?
No. The Eaton 35324W is a wallplate with a 4-conductor data/voice modular jack, Type 625B4, so it carries a telecom jack rather than switch openings. The Pass & Seymour SS2 is a 2-gang brushed stainless plate with toggle switch openings. They serve different devices entirely and are not substitutes for one another.
How fast can I get the Pass & Seymour SS2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour SS2 come with a warranty?
Absolutely. The Pass & Seymour SS2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour SS2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour SS2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!