Pass & Seymour TP264W TradeMas...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$53.51
$27.13
Pass & Seymour TP264W TradeMaster 4-Gang Decorator Wallplate, Nylon, White

Pass & Seymour TP264W TradeMaster 4-Gang Decorator Wallplate, Nylon, White

(No reviews yet) Write a Review

Model: TP264-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$53.51
$27.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour TP264W TradeMaster 4-Gang Decorator Wallplate, Nylon, White

The Pass & Seymour TP264W TradeMaster wallplate is a 4-Gang nylon wallplate with 4 decorator openings, finished in White. Molded of rugged, self-extinguishing nylon in the TP series, it is built extra-thick and oversized (extra 3/16 inch width and height over Standard size plates) to hold up in high-abuse environments. The plate carries a nominal thickness of .07 inch and is cULus Listed for use in hospital, industrial, and institutional installations.

Key Features

  • 4-Gang Configuration: Four decorator-style openings accommodate multiple decorator devices in a single wallplate.
  • Durable Construction: Molded of rugged, practically indestructible self-extinguishing nylon (TP series) for long-term reliability in demanding settings.
  • Oversized TP Series Sizing: Extra 3/16 inch width and height compared to Standard size plates for added coverage and abuse resistance.
  • Nominal Thickness: .07 inch profile balances strength with a low-profile finished look.
  • Overall Dimensions: Measures approximately 8.375 in wide by 4.6875 in high by 0.25 in deep.
  • Finish: Matte White finish for a clean, consistent appearance on the wall.
  • High-Abuse Application Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 4.6875 in
  • Product Line: Pass & Seymour
  • Product Width: 8.375 in
  • Product Depth: 0.25 in

Typical Applications

  • Hospital and Healthcare Facility Wiring Devices
  • Industrial and Institutional Electrical Installations
  • High-Abuse Commercial Environments
  • Multi-Device Decorator Switch and Receptacle Gangs
  • Renovation and New Construction Wiring Devices

Why Pass & Seymour?

Pass & Seymour engineers the TradeMaster TP series from self-extinguishing nylon and builds it oversized versus Standard plates specifically to survive high-abuse hospital, industrial, and institutional environments. Backed by cULus Listing, the TP264W delivers dependable, code-compliant performance for demanding commercial electrical projects. It's a trusted choice for facilities that need wiring devices to hold up under daily wear.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Decorator Wallplate
Product Material:
Nylon
Product Color:
White
Configuration:
4-Gang
Listing:
cULus
Product Finish:
Matte
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates
Product Depth:
0.25 in
Product Height:
4.688 in
Product Width:
8.375 in

Pass & Seymour TP264-W – Frequently Asked Questions

1) Will the Pass & Seymour TP264W wallplate cover a toggle switch, or does it only fit decorator devices?
Decorator devices only. The TP264W has four rectangular decorator openings, so it suits decorator rocker switches, GFCIs, and decorator-style receptacles. Standard toggle switches and duplex receptacles need a different opening shape, not this plate.
2) Is the TP264W an oversized plate that will hide a rough drywall cut?
Yes, within limits. The TradeMaster TP series runs an extra 3/16 inch in both width and height versus a standard-size plate, with overall dimensions of 8.375 in wide by 4.688 in high by 0.25 in deep. That extra margin covers minor over-cut and paint lines around the box, but it is not a jumbo plate, so badly oversized openings will still show.
3) Is nylon strong enough for a hospital corridor, or should I spec a metal wallplate?
Nylon handles it. The TP264W is molded of self-extinguishing nylon at a nominal .07 inch thickness and is cULus Listed for hospital, industrial, and institutional use. Nylon won't dent like thin steel and won't crack like thermoset plastic under impact. Go to stainless only where the facility standard calls for metal or where you need a groundable metal plate.
4) Is the TP264W white a matte or a glossy finish? I need it to match existing plates.
Matte white. The TP264W is a flat, non-gloss white, which is what most commercial decorator device lines use. If the plates already on the wall are high-gloss white, the sheen will read slightly different side by side even though the color family matches.
5) Can I mix switches and receptacles behind one TP264W plate?
Yes. All four openings on the TP264W are identical decorator cutouts, so any combination of decorator rocker switches, decorator receptacles, GFCIs, or decorator-style dimmers can sit in the four positions in any order, provided every device in the gang is decorator-style.
6) For a hospital corridor where plates take abuse, how does the TP264W compare with the Eaton 7729V-SP decorator plate?
The Pass & Seymour TP264W is molded of self-extinguishing nylon, built oversized with an extra 3/16 inch of width and height over standard-size plates, carries a nominal .07 inch thickness, and is cULus Listed for hospital, industrial, and institutional work. The Eaton 7729V-SP is a decorator wallplate cover in a triple-gang configuration. The two differ in gang count, so the choice follows the device box; where four decorator devices are ganged in a high-abuse area, the nylon TP264W is the oversized option.
7) Does the TP264W wallplate come with mounting screws?
Decorator wallplates in this class mount with the screws supplied on the devices or straps themselves, and the plate carries the matching screw holes at each gang. If you are replacing plates only and discarding the old screws, order 6-32 wallplate screws in white separately to keep the heads matching the plate.
8) What is the Pass & Seymour part number and country of origin for the 4-gang white decorator plate?
Order it as Pass & Seymour TP264W, part number TP264-W, in the TradeMaster TP series. It is made in Mexico.
How fast can I get the Pass & Seymour TP264-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP264-W come with a warranty?
Absolutely. The Pass & Seymour TP264-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP264-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP264-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!