Pass & Seymour TP7 TradeMaster...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$0.74
Pass & Seymour TP7 TradeMaster 1-Gang Nylon Single Receptacle Wall Plate

Pass & Seymour TP7 TradeMaster 1-Gang Nylon Single Receptacle Wall Plate

(No reviews yet) Write a Review

Model: TP7-I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$0.74
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Pass & Seymour TP7I TradeMaster Nylon Wall Plate, 1-Gang Single Receptacle Opening, Ivory

The Pass & Seymour TP7I is a TradeMaster 1-Gang nylon wall plate with a single receptacle opening, finished in Ivory. Molded of rugged, self-extinguishing nylon and built to a nominal thickness of .070 inch, the TP series is sized 3/16 inch wider and taller than standard-size plates for extra coverage. It is cULus Listed and preferred for hospital, industrial, institutional, and other high-abuse applications where a standard plastic plate would not hold up.

Key Features

  • Configuration: 1-Gang wall plate with a single receptacle opening for standard duplex receptacle devices.
  • Durable Construction: Molded of rugged, practically indestructible self-extinguishing nylon (TP series) for long-term durability in demanding environments.
  • Oversized Coverage: TP series plates are 3/16 inch wider and taller than standard-size plates, providing extra coverage at the device opening.
  • Nominal Thickness: .070 inch nylon construction for a sturdy, high-abuse-resistant plate.
  • High-Abuse Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications where standard plates fall short.
  • Finish: Ivory color with a matte finish for a clean, low-glare appearance.
  • Color Options: The TradeMaster series is also available in White, Brown, Gray, Black, Blue, Orange, Red, and Light Almond.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: United States
  • Product Finish: Matte
  • Product Height: 4.6875 in
  • Product Width: 2.9375 in
  • Product Depth: 0.25 in
  • Product Line: Pass & Seymour

Typical Applications

  • Hospital and Healthcare Facility Wiring Devices
  • Industrial and Institutional Electrical Installations
  • High-Abuse Commercial Environments
  • Standard Duplex Receptacle Device Covers
  • Renovation and New Construction Wiring Device Trim-Out

Why Pass & Seymour?

Pass & Seymour's TradeMaster TP7I wall plate combines self-extinguishing nylon construction with cULus Listed compliance, giving electrical professionals a durable, code-compliant cover plate for demanding, high-abuse installations. Its oversized TP-series footprint and .070 inch nominal thickness deliver dependable, long-lasting performance on hospital, industrial, and institutional receptacle installations."

Manufacturer Resources

Spec Sheet

Product Specs

Configuration:
Single Gang
Country Of Origin:
United States
Listing:
cULus
Product Group:
Wiring Devices
Product Material:
Nylon
Department:
Electrical
Product Finish:
Matte
Product Type:
Single Receptacle Wallplate
Product Subgroup:
Wallplates
Product Height:
4.688 in
Product Depth:
0.25 in
Product Width:
2.938 in

Pass & Seymour TP7-I – Frequently Asked Questions

1) Will the Pass & Seymour TP7 wall plate cover a slightly oversized or rough drywall cutout around a duplex receptacle?
That's exactly what the TP series is built for. TradeMaster TP plates run 3/16 inch wider and taller than a standard-size plate, so they hide ragged drywall cuts and oversized box openings that a standard plate leaves showing. Overall size is 4.688 inches by 2.938 inches, with a 0.25 inch depth.
2) Does the TP7 fit a standard duplex receptacle, or is it a single round-hole plate?
It is a 1-gang plate with a single duplex receptacle opening, so it fits the ordinary two-outlet duplex device found in most commercial and residential boxes. It is not a single round-opening plate and will not trim a twist-lock or range/dryer receptacle.
3) Is a nylon wall plate tough enough for a hospital corridor or a shop floor?
Nylon is the step up from standard plastic for abuse. The TP series is molded of self-extinguishing nylon at a nominal .070 inch thickness and is called out for hospital, industrial, institutional and other high-abuse work where a standard plastic plate cracks. For receptacles that take real mechanical impact or washdown, a 430 stainless plate such as the Mulberry line is the heavier option, but for standard duplex trim-out in those buildings nylon is the usual spec.
4) I need a cover for a 30- or 50-amp dryer or welder receptacle. Will the TP7 work?
No. The TP7 only has a duplex receptacle opening and will not trim a 30/50-amp power outlet. For those, go to a stainless power receptacle plate such as the Mulberry 97221T08 for a 30/50-amp 3-wire receptacle, or the 2-gang Mulberry 97223T08 for 30/50/60-amp receptacles. For a twist-lock device, the Mulberry 97778 2-gang twist lock plate is the right family.
5) I need a cover for a 30-amp 3-wire dryer receptacle, not a duplex outlet. Will the Pass & Seymour TP7 work?
No. The TP7 TradeMaster is a 1-gang nylon plate with a single receptacle opening sized for standard duplex receptacle devices, so the cutout will not match a 30-amp 3-wire power receptacle. For that device, use the Mulberry 97221T08, a 430 stainless steel wallplate made for a 30/50-amp 3-wire receptacle.
6) Which colors does the TP7 come in and how do the part numbers break out?
Three orderable colors: Brown is TP7, Ivory is TP7-I, and White is TP7-W. Spec the suffix with the order, because on a fleet trim-out a mismatched plate color is the thing that gets noticed.
7) For a hospital corridor, is nylon like the TP7 or stainless steel the better cover plate?
Both are used in high-abuse work, and they differ in material rather than purpose. The Pass & Seymour TP7 is molded of self-extinguishing nylon at a nominal .070 inch, is cULus Listed, and runs 3/16 inch wider and taller than a standard plate for extra coverage at the device. The Mulberry plates in the same duty class, such as the 97778 and 97223T08, are 430 grade stainless steel. Nylon comes in colors - the TP7 is offered in white, ivory, and brown - while 430 stainless is a single brushed metal appearance.
8) Will the TP7 plate look glossy next to my existing devices?
No, it is a matte finish, which keeps glare down and reads closer to the device bodies on a wall of receptacles than a high-gloss plate does.
9) Is the Pass & Seymour TP7 made in the USA? I have domestic sourcing requirements.
Country of origin on the TP7 TradeMaster plate is the United States, which matters on federally funded and Buy American scoped electrical work.
How fast can I get the Pass & Seymour TP7-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP7-I come with a warranty?
Absolutely. The Pass & Seymour TP7-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP7-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP7-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!