Pass & Seymour TradeMaster 1-G...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.42
Pass & Seymour TradeMaster 1-Gang Nylon Duplex Wall Plate

Pass & Seymour TradeMaster 1-Gang Nylon Duplex Wall Plate

(No reviews yet) Write a Review

Model: TP8-GRY

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour TradeMaster TP8GRY 1-Gang Nylon Duplex Wall Plate, Gray

The Pass & Seymour TradeMaster TP8GRY is a 1-gang nylon wall plate with duplex receptacle openings, finished in gray for a clean, professional appearance. Molded of rugged, practically indestructible self-extinguishing nylon and built to a nominal thickness of .070 inch, this 'TP' series plate is sized with an extra 3/16 inch of width and height over standard plates for broader coverage of the mounting surface. It is cULus Listed and preferred for hospital, industrial, institutional, and other high-abuse applications where standard plates fall short.

Key Features

  • Nylon Construction: Molded of rugged, practically indestructible self-extinguishing nylon for long-term durability in demanding environments.
  • Nominal Thickness: .070 inch thick construction typical of the TradeMaster 'TP' series.
  • Oversized Coverage: 'TP' series plates offer an extra 3/16 inch of width and height over standard-size plates for better wall coverage.
  • Duplex Receptacle Openings: Configured for 1-gang duplex receptacle devices for straightforward installation.
  • Gray Finish: Matte gray finish coordinates with a wide range of device and wall colors.
  • High-Abuse Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications.
  • Dimensions: Measures approximately 4.6875 in height by 2.9375 in width by 0.25 in depth.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: United States
  • Product Color: Grey
  • Product Finish: Matte
  • Product Height: 4.6875 in
  • Product Line: Pass & Seymour
  • Product Width: 2.9375 in
  • Product Depth: 0.25 in

Typical Applications

  • Hospital and Healthcare Facility Wiring Devices
  • Industrial and Institutional Electrical Installations
  • High-Abuse Commercial Environments
  • Duplex Receptacle Cover Installations
  • Renovation and New Construction Device Wiring

Why Pass & Seymour?

Pass & Seymour's TradeMaster TP series wall plates are molded of rugged, self-extinguishing nylon and cULus Listed, giving electrical professionals a durable, code-compliant cover plate built for high-abuse settings. The oversized 'TP' series dimensions and consistent .070 inch nominal thickness make these plates a dependable choice for hospital, industrial, and institutional projects where standard-size plates aren't enough. Choose Pass & Seymour for reliable, high-abuse-rated wiring devices and accessories.

Manufacturer Resources

Spec Sheet

Product Specs

Country Of Origin:
United States
Listing:
cULus
Product Group:
Wiring Devices
Product Material:
Nylon
Department:
Electrical
Product Finish:
Matte
Product Type:
Duplex Receptacle Wallplate
Product Subgroup:
Wallplates
Product Width:
2.938 in
Product Height:
4.688 in
Product Depth:
0.25 in

Pass & Seymour TP8-GRY – Frequently Asked Questions

1) Will a Pass & Seymour TP8 wall plate cover an oversized or damaged wall opening around a duplex receptacle?
The TradeMaster TP series runs an extra 3/16 inch in both width and height over a standard-size plate, so it hides ragged drywall cuts and paint lines a standard plate leaves showing. The plate measures 4.6875 by 2.9375 by 0.25 inches. If the opening is chewed up wider than that, you need a jumbo plate instead.
2) Is the TP8 duplex plate tough enough for hospital corridors and industrial areas?
That is what it is built for. The plate is molded of rugged self-extinguishing nylon at a .070 inch nominal thickness, and Pass & Seymour positions the TP series for hospital, industrial, institutional and other high-abuse applications. Nylon takes cart strikes and flexing without the chipping you get from thermoset or thin steel plates.
3) Will the TP8 fit a standard duplex receptacle, or only a decorator style device?
It is cut for a standard duplex receptacle, two round-shouldered openings side by side. It will not cover a decorator or GFCI style rectangular device, or a toggle switch. For those you need a plate with the matching single rectangular opening.
4) What colors does the Pass & Seymour TP8 1-gang duplex plate come in?
Three: brown (TP8), gray (TP8-GRY) and white (TP8-W). All three are the same nylon plate in a matte finish, so mixing colors across a floor by device type or tenant area is just a part number change.
5) Can I use the oversized TP8 plate next to standard-size plates on the same wall?
You can, but they will not line up visually. The TP series is 3/16 inch taller and wider than a standard plate, so the edges and shadow lines differ side by side. Where plates are ganged in a row or in a visible finished space, standardize on one size; use the oversized TP where coverage matters more than a match.
6) Is the TP8 plate made in the USA?
Country of origin is the United States. That matters on government and institutional work where domestic-sourcing language shows up in the spec.
7) Does the TP8 wall plate come with mounting screws?
The plate itself is a 1-gang nylon duplex cover; screw color is normally matched to the plate color, and on a device replacement you reuse the screws that come with the receptacle. Confirm your device is supplied with 6-32 plate screws if you are covering existing rough-in.
How fast can I get the Pass & Seymour TP8-GRY delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP8-GRY come with a warranty?
Absolutely. The Pass & Seymour TP8-GRY is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP8-GRY?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP8-GRY from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!