Pass & Seymour TradeMaster 2-G...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1.33
Pass & Seymour TradeMaster 2-Gang Nylon Duplex Wall Plate

Pass & Seymour TradeMaster 2-Gang Nylon Duplex Wall Plate

(No reviews yet) Write a Review

Model: TP82-GRY

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour TP82RED TradeMaster 2-Gang Nylon Duplex Wall Plate, Red

The Pass & Seymour TP82RED is a TradeMaster 2-Gang Nylon Wall Plate featuring 2 duplex receptacle openings in Red. Molded of rugged, practically indestructible self-extinguishing nylon, this TP series plate is preferred for hospital, industrial, institutional, and other high-abuse applications where standard plastic covers fall short. It is cULus Listed and finished with a nominal thickness of .070 inch for consistent fit and long-term durability over demanding commercial environments.

Key Features

  • 2-Gang Configuration: Two duplex receptacle openings allow this plate to cover dual duplex receptacle installations in a single unit.
  • Durable Nylon Construction: Molded of rugged, practically indestructible self-extinguishing nylon for long service life in demanding settings.
  • High-Abuse Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications where standard wall plates wear out quickly.
  • Extended TP Sizing: TP series plates offer an extra 3/16 inch of width and height compared to Standard size plates, providing better wall coverage.
  • Nominal Thickness: .070 inch nominal thickness delivers added rigidity and impact resistance versus thinner cover plates.
  • Matte Red Finish: Finished in Red with a matte surface for a clean, consistent commercial appearance.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: United States
  • Product Color: Red
  • Product Finish: Matte
  • Product Height: 4.6875 in
  • Product Line: Pass & Seymour
  • Product Width: 4.75 in
  • Product Depth: 0.25 in

Typical Applications

  • Commercial and Institutional Electrical Installations
  • Hospital and Healthcare Facility Wiring Devices
  • Industrial and High-Abuse Environments
  • Dual Duplex Receptacle Device Covering
  • Renovation and New Commercial Construction

Why Pass & Seymour?

Pass & Seymour builds the TradeMaster TP82RED from self-extinguishing nylon specifically to withstand the high-abuse conditions found in hospitals, industrial facilities, and institutional buildings, and it carries cULus Listing for code-compliant use on professional electrical projects. The extended TP-series sizing and .070 inch nominal thickness give installers a durable, reliable 2-gang duplex wall plate that holds up where standard plates do not.

Manufacturer Resources

Spec Sheet

Product Specs

Configuration:
2-Gang Duplex
Country Of Origin:
United States
Listing:
cULus
Product Group:
Wiring Devices
Product Material:
Nylon
Department:
Electrical
Product Finish:
Matte
Product Type:
Duplex Receptacle Wallplate
Product Subgroup:
Wallplates
Product Width:
4.75 in
Product Depth:
0.25 in
Product Height:
4.688 in

Pass & Seymour TP82-GRY – Frequently Asked Questions

1) Will the Pass & Seymour TP82 2-gang plate cover two duplex receptacles in one box?
That is exactly what it's built for. The TradeMaster TP82 is a 2-gang duplex configuration, so it covers a two-gang box with two duplex receptacles side by side. It won't work over a decorator/rocker device or a toggle switch, since both openings are cut for standard duplex receptacles.
2) What size is the TP82 wall plate, and will it cover a rough drywall cutout?
It measures 4.75 in wide by 4.688 in high with a 0.25 in depth. TP series plates run an extra 3/16 inch in width and height versus standard-size plates, so they hide ragged box cutouts and old paint lines that a standard plate leaves showing. If you need more coverage than that, you're into oversized plates.
3) Is there a metal version of a duplex receptacle wallplate instead of nylon?
The Pass & Seymour TP82 TradeMaster is molded nylon. If a metal plate is specified, the Mulberry 93101 is a 302 stainless steel 1-gang duplex receptacle plate, the Mulberry 97101 is a 9710 Series stainless steel screw-mount duplex receptacle plate, and the Mulberry 76103 is a steel Princess size 3-gang plate with three duplex openings in white. Stainless resists dents and scratches; the nylon TP82 is self-extinguishing and non-conductive, and is carried in gray and red.
4) What should I use if the box only has one duplex receptacle instead of two?
The Pass & Seymour TP82 TradeMaster plate is a 2-gang duplex configuration, so it covers two duplex devices side by side. For a single duplex opening, the Bryant P8 Series 1-Gang Duplex Wallplate is the one-device equivalent, and the Mulberry 93101 is a 1-gang duplex receptacle plate in 302 stainless steel. Match the plate gang count to the gang count of the box, since a 2-gang plate will not seat on a single-gang box.
5) Is a nylon wall plate tough enough for a hospital corridor or a shop floor?
Nylon is the material to pick for that. The TP82 is molded of self-extinguishing nylon at a .070 inch nominal thickness, which is why the TP series gets specified for hospital, industrial, and institutional high-abuse locations where thin thermoplastic covers crack at the screw holes. For areas with carts and ladders constantly hitting the wall, stainless is the step up, like the Mulberry 93101 302 stainless 1-gang duplex plate.
6) Is the Pass & Seymour TP82 UL listed for commercial jobs?
It carries a cULus Listing, which covers both US and Canadian use, so it holds up on spec'd commercial and institutional electrical work.
7) What colors does the TradeMaster TP82 2-gang duplex plate come in?
Two: gray (TP82-GRY) and red (TP82-RED). Both have a matte finish. Red is the usual choice for marking emergency or generator-backed circuits in healthcare and data rooms, and gray is the common commercial match for gray devices.
8) Does a Mulberry Princess size plate substitute for a TradeMaster TP plate?
They are not interchangeable sizes. The Mulberry 76103 is a Princess size plate, which is a smaller footprint than standard, while the Pass & Seymour TP82 TradeMaster uses extended TP sizing that adds about 3/16 inch of width and height over a standard plate, measuring 4.75 inches wide by 4.688 inches high. If the goal is to hide a rough wall cut around the box, the oversized TP dimension covers more; a Princess plate covers less. The 76103 is also a 3-gang plate rather than 2-gang.
9) For a hospital corridor where plates get beaten up, is stainless or the nylon TradeMaster the better call?
Both are used in that setting. The Pass & Seymour TP82 TradeMaster is molded of self-extinguishing nylon at .070 inch nominal thickness and is cULus Listed, and Pass & Seymour positions it for hospital, industrial and institutional high-abuse work; red and gray let you color-code emergency or isolated-power circuits. The Mulberry 93101 in 302 stainless steel is listed as Special Grade and gives a metal face instead. Color-coded circuit identification is the deciding factor if your facility standard calls for it, since the stainless plate is a bare metal finish.
10) Does the TP82 wall plate come with mounting screws?
Wall plates in this class mount with the screws supplied in the receptacle's own strap, which is where most installers get them. Plan on using the device screws from the receptacle, or stock a bag of 6-32 plate screws in a matching color so the heads blend with the plate.
11) Is the Pass & Seymour TP82 made in the USA?
Yes, country of origin on the TP82 is the United States, which matters if your project has domestic-preference or Buy American language in the spec.
How fast can I get the Pass & Seymour TP82-GRY delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP82-GRY come with a warranty?
Absolutely. The Pass & Seymour TP82-GRY is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP82-GRY?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP82-GRY from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!