Pass & Seymour Wattstopper PW1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$184.96
$129.49
Pass & Seymour Wattstopper PW10024W Passive Infrared Wall Switch Occupancy Sensor, 24V, White

Pass & Seymour Wattstopper PW10024W Passive Infrared Wall Switch Occupancy Sensor, 24V, White

(No reviews yet) Write a Review

Model: PAS-PW-100-24-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$184.96
$129.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour Wattstopper PW10024W Passive Infrared Wall Switch Occupancy Sensor, 24V, White

The Pass & Seymour Wattstopper® PW10024W is a Passive Infrared (PIR) Wall Switch Occupancy Sensor built for reliable, energy-conscious lighting control in commercial spaces. Finished in White with a color-matched, low-profile lens, this 24V low-voltage sensor delivers high sensitivity and dense coverage while defaulting to Manual-ON operation to maximize energy savings. Selectable walk-through, test, and presentation modes give installers flexible control over how occupancy is detected and how lighting responds.

Key Features

  • Voltage Rating: 24V low-voltage input simplifies integration with compatible lighting control systems.
  • Color-Matched Lens: Low-profile, White color-matched lens design blends cleanly with wall switch plates for an appealing finish.
  • High Sensitivity Detection: Dense coverage and high sensitivity deliver exceptional occupancy-sensing performance.
  • Selectable Operating Modes: Walk-through, test, and presentation modes increase energy savings and add day-to-day convenience.
  • Manual-ON Default: Defaults to Manual-ON operation for maximum energy savings and code-friendly control.
  • Finish: Matte White finish for a clean, unobtrusive wall-mounted appearance.

Technical Specifications

  • Country Of Origin: China
  • Product Finish: Matte
  • Product Line: Pass & Seymour

Typical Applications

  • Commercial and Office Wall Switch Lighting Control
  • Conference Rooms and Private Offices
  • Restrooms, Hallways, and Break Rooms
  • Energy Code Compliance Retrofit Projects
  • Manual-ON, Auto-OFF Lighting Control Applications

Why Pass & Seymour?

Pass & Seymour's Wattstopper occupancy sensor line pairs high-sensitivity PIR detection with practical, installer-friendly features like selectable operating modes and a Manual-ON default that supports energy-code-driven lighting strategies. The color-matched, low-profile White lens and Matte finish make the PW10024W a clean fit for professional wall switch installations where reliable occupancy detection and everyday energy savings both matter.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Occupancy Sensor
Product Color:
White
Voltage Rating:
24V
Product Finish:
Matte
Country of Origin:
China
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Lighting Controls & Sensors

Pass & Seymour PAS-PW-100-24-W – Frequently Asked Questions

1) Does the PW10024W turn lights on automatically when someone walks in?
No, it defaults to Manual-ON: someone presses the switch to turn lights on and the sensor handles the auto-off when the space empties. That is the behavior most energy codes want for private offices and conference rooms. If your spec calls for auto-on, this default is the wrong fit unless the control system allows it to be changed.
2) I do not have a low-voltage power pack in the room - what should I use instead of the PW10024W?
The PW10024W is a 24V low-voltage sensor, so it needs a compatible low-voltage lighting control system or power pack feeding the switch leg. If you only have line voltage at the box, use a line-voltage sensor instead: the Leviton ODS10-ID is a commercial grade PIR occupancy sensor rated 120/277V AC, and the Leviton ODC Series ODC0S-I1W is a commercial grade PIR line voltage occupancy sensor. Either one wires directly to the branch circuit without additional low-voltage gear.
3) What operating modes can an installer select on the Wattstopper PW10024W PIR sensor?
Walk-through, test, and presentation modes are selectable. Walk-through shortens the on-time for someone who only steps in briefly, test mode lets you verify coverage during commissioning, and presentation mode holds lighting as you want it during a meeting where occupants sit still.
4) Is a PIR wall switch sensor the right choice for a restroom or an open hallway?
Passive infrared sensing needs line of sight to detect body heat moving across the lens, so a wall switch PIR works well in private offices, conference rooms, break rooms, hallways and small restrooms where the sensor can see the occupants. In restrooms broken up by stalls or partitions that block the view from the switch location, a wall switch PIR will drop occupants and a ceiling-mounted sensor is the better placement. The PW10024W is listed for commercial office, conference room, private office, restroom, hallway and break room control.
5) We need a sensor with a large coverage area for an open office. Is this the one?
The PW10024W is a wall switch sensor with high sensitivity and dense coverage, which suits a room controlled from its entry switch. For a large open area where you are counting on square footage coverage, the Leviton ODS10-ID-E is rated 2100 square feet, and the Leviton ODS15-IDW is a self-adaptive commercial grade PIR unit.
6) What is the difference between the Pass & Seymour PW10024W and the Lithonia CMR-9?
The PW10024W is a 24V low-voltage PIR wall switch sensor that sends an occupancy signal to a compatible lighting control system. The Lithonia CMR-9 is a PIR occupancy sensor with an onboard relay, so the switching contact is built into the sensor itself. Both are white. Choose the PW10024W where the relay or power pack already exists in the control system, and the CMR-9 where you want the switching function integrated into the sensor.
7) The PW10024W has selectable walk-through and presentation modes - is there a sensor that adjusts sensitivity on its own instead?
The Leviton ODS15-IDW is a PIR self-adaptive commercial grade occupancy sensor, meaning it adjusts its detection behavior automatically rather than relying on installer-set modes. The PW10024W takes the opposite approach: it offers selectable walk-through, test, and presentation modes so the installer sets how occupancy is detected and how the lighting responds, and it defaults to Manual-ON. Pick the ODS15-IDW for a hands-off commissioning, and the PW10024W where you want to dial in behavior per room.
8) Will this sensor match white switch plates and other white devices in an office?
Yes. The PW10024W is White with a matte finish and a low-profile, color-matched lens, so it sits behind standard white wall plates without the lens standing out. Useful if you are standardizing device color across a floor of offices and restrooms.
9) What is the exact part number and where is the Pass & Seymour PW10024W made?
Order it as PW10024W, Pass & Seymour Wattstopper, manufacturer part PW-100-24-W. Country of origin is China. Useful detail if your project has sourcing documentation requirements.
How fast can I get the Pass & Seymour PAS-PW-100-24-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PAS-PW-100-24-W come with a warranty?
Absolutely. The Pass & Seymour PAS-PW-100-24-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PAS-PW-100-24-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PAS-PW-100-24-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!