Pass & Seymour Weatherproof Tw...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.41
Pass & Seymour Weatherproof Two-Gang Deep Box, Die-Cast Aluminum

Pass & Seymour Weatherproof Two-Gang Deep Box, Die-Cast Aluminum

(No reviews yet) Write a Review

Model: WPBD452

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.41
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour Weatherproof Two-Gang Deep Box, Die-Cast Aluminum

The Pass & Seymour Weatherproof Two-Gang Deep Box is a rugged, code-ready enclosure built for both interior and exterior electrical work. Constructed from heavy die-cast aluminum in a Gray finish, this deep box features 5 mounting holes with threaded openings (2 holes on each end, 1 hole in back) and a generous 37 Cu. In. capacity for wiring devices. It is UL Listed and CSA Listed for wet and/or damp locations when installed with an appropriate cover, making it a dependable choice for outdoor receptacles, switches, and junctions.

Key Features

  • Two-Gang Deep Box Design: 5-hole configuration (2 holes each end, 1 hole in back) with 37 Cu. In. capacity for interior and exterior device installations.
  • Durable Construction: Heavy die-cast aluminum body resists impact and supports long-term outdoor use.
  • Corrosion-Resistant Finish: Baked-on electrostatic polyester powder paint provides superior scratch and corrosion resistance in Gray.
  • Threaded Mounting Holes: Simplifies conduit and fitting connections at each knockout location.
  • Cover Compatibility: Accepts standard three-gang weatherproof covers for finished, weathertight installations.
  • Included Hardware: 4 closure plugs and mounting lugs furnished with every box.
  • Clean Knockouts: Knockout studs are removed with a simple, sharp hammer strike for clean mounting holes.

Certifications & Compliance

  • UL Listed
  • CSA Listed
  • UL Listed for Wet and/or Damp Locations with Appropriate Cover

Technical Specifications

  • Material: Die-Cast Aluminum
  • Color: Gray
  • Product Line: Pass & Seymour
  • Capacity: 37 Cu. In.
  • Mounting Holes: 5 Holes, Threaded (2 Each End, 1 in Back)
  • Country of Origin: India
  • Packaging: 4 EA

Typical Applications

  • Exterior and Weatherproof Electrical Installations
  • Wet and Damp Location Wiring
  • Outdoor Receptacle and Switch Enclosures
  • Commercial and Residential Outdoor Wiring
  • Conduit-Fed Junction and Device Boxes

Why Pass & Seymour?

Pass & Seymour builds this weatherproof box from heavy die-cast aluminum with a baked-on electrostatic powder finish, giving installers a corrosion-resistant enclosure that stands up to outdoor exposure. Backed by UL and CSA listings for wet and/or damp locations, it delivers the code-compliant reliability electrical professionals need for exterior device installations, complete with the closure plugs and mounting lugs required for a finished job.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Weatherproof Box
Listing:
UL Listed
Standards:
CSA Listed
Product Material:
Die-Cast Aluminum
Product Color:
Gray
Department:
Electrical
Product Group:
Boxes & Enclosures
Product Subgroup:
Weatherproof Enclosures

Pass & Seymour WPBD452 – Frequently Asked Questions

1) Is the Pass & Seymour WPBD452 weatherproof box rated for outdoor wet locations?
The WPBD452 die-cast aluminum box is UL Listed and CSA Listed, and it is UL Listed for wet and/or damp locations when installed with an appropriate cover. The box alone does not make the installation weathertight; the cover does. Order the cover with the box if the opening is exposed to rain or washdown.
2) How many wiring devices and conductors will a 37 cubic inch two-gang box hold?
The WPBD452 is a two-gang deep box with 37 cubic inches of capacity, so it takes two devices such as a pair of receptacles, two switches, or a receptacle and switch combination. The 37 cu in figure is what you use for NEC box-fill math, counting conductors, devices, and grounds, so it gives real room for conduit-fed outdoor circuits where splices land in the box rather than a shallow surface box that fills up fast.
3) Where are the conduit entries on the Pass & Seymour WPBD452 box, and are they threaded?
Five threaded openings: two on each end and one in the back. Threaded hubs mean rigid or IMC conduit and threaded fittings thread straight in, no locknuts or bushings on the inside. The studs are knocked out with one sharp hammer strike for a clean hole, so you only open the entries you actually use.
4) I need three devices in one outdoor box - what should I use instead of the WPBD452?
Step up to the Mulberry 30601 Royal Mountie, a die-cast aluminum 3-gang weatherproof outlet box. The Pass & Seymour WPBD452 is built as a two-gang deep box, so a three-device plate will not land on it. Both are powder-coated die-cast aluminum enclosures intended for weatherproof outlet work, so the material and finish character carries over when you switch to the 3-gang.
5) What is the closest alternative to the Pass & Seymour WPBD452 weatherproof box?
The Mulberry 30601 Royal Mountie weatherproof outlet box is the nearest comparable. Like the WPBD452, it is a powder-coated die-cast aluminum weatherproof outlet box, so the corrosion behavior and the hammer-strike knockout handling are similar. The difference that decides the job is gang count: the Mulberry 30601 is a 3-gang box, while the WPBD452 is a two-gang deep box with 37 cubic inches of capacity and five threaded mounting holes. If the device plate on the drawing is two-gang, the WPBD452 is the match; if the opening carries three devices, the 30601 is the one to order.
6) Do I need to buy plugs for the unused openings on this weatherproof box?
No, the WPBD452 ships with 4 closure plugs plus mounting lugs, so unused threaded entries can be sealed without a separate order. What is not included is the cover, which you need for the wet-location listing and for mounting the devices.
7) Will a die-cast aluminum box like this corrode on a coastal or washdown installation?
The WPBD452 body is heavy die-cast aluminum finished with a baked-on electrostatic polyester powder paint in gray, which is what resists scratching and corrosion in exposure. Aluminum also avoids the rust-through you get when a painted steel box gets chipped. For long-term exterior runs, keep the finish intact at the conduit entries and seal unused openings with the supplied plugs.
8) Is the Mulberry 30601 a drop-in replacement for a Pass & Seymour WPBD452?
No. It looks like a substitute because both are powder-coated die-cast aluminum weatherproof boxes, but the Mulberry 30601 is a 3-gang box and the WPBD452 is a two-gang deep box. Cover plates and device straps are gang-specific, so a 30601 will not accept two-gang weatherproof covers and the WPBD452 will not take a three-device plate. Match gang count first, then the cover.
9) Is this box sold individually or in a multi-pack?
Packaging on the WPBD452 is 4 each, so it comes as a four-box pack rather than a single unit. That suits property maintenance crews and contractors doing several exterior openings on one job; for a one-off replacement you are still buying four.
10) Can the Pass & Seymour WPBD452 be used indoors, or is it strictly an outdoor box?
Both. It is built for interior and exterior electrical work, and the die-cast body is a common choice indoors wherever a surface-mounted box needs impact resistance, such as parking structures, mechanical rooms, and loading docks. The wet and damp location listing only comes into play when the box is mounted with the appropriate cover.
How fast can I get the Pass & Seymour WPBD452 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour WPBD452 come with a warranty?
Absolutely. The Pass & Seymour WPBD452 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour WPBD452?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour WPBD452 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!