PDQ TJ176 Privacy Tubular Lever Lock

PDQ TJ176 Privacy Tubular Lever Lock

Tubular Lever Lock with Stainless Steel Trim

The PDQ TJ176 is the Privacy function (ANSI/BHMA F76) of the PDQ TJ Series Tubular Trim Suite Lock.

The PDQ TJ Series is a tubular lock for non-keyed interior functions: communicating, passage, privacy, double dummy and single dummy. A tubular lock installs through cross bores in the door rather than a pocket cut into the door edge, making for a simpler installation than a mortise lock.

The TJ is styled to coordinate with PDQ's MR Series mortise locks, sharing the same sectional rose diameter and lever designs, so one lever look can run across a project. Its levers and roses are investment cast stainless steel, offered with a round or square rose in ten lever designs, and the lock carries a five year limited warranty (except ball knob).

Key Features

• Investment cast stainless steel levers and roses
• Ten lever designs: Philadelphia, Boston, Miami, Chicago, Houston, Memphis, Orlando, Los Angeles, Dallas and Ball Knob
• Round rose 2-3/8" diameter or square rose 2-9/16"
• Fits doors 1-3/8" to 1-3/4" thick; ANSI 115.2 Type 161 prep for 2-3/4" backset, Type 160 optional
• 2-3/4" backset default with 2-3/8" optional; full lip strike default, T-strike and ASA strike optional
• Non-handed except Memphis (Orlando, Los Angeles and Houston are handed for the 211 single dummy only)
• Complies with ADA and ICC/ANSI A117.1 (except ball knob)
• Five (5) year limited warranty (except ball knob)

Technical Specifications

• ANSI/BHMA Function: F76
• Lock Function: Privacy
• Keyed Function: Non-Keyed
• Lock Type: Tubular
• Backset (Distance): 2-3/4"
• Door Hand Direction: Non-Handed
• Warranty: 5-year
• Door thickness: 1-3/8" (35mm) to 1-3/4" (44mm)
• Backset: 2-3/4" (70mm) default, 2-3/8" (60mm) optional
• Latchbolt: 2-3/4" backset has 1-1/8" faceplate; 2-3/8" backset has 1" faceplate filler
• Strike: Full Lip default; T-Strike and ASA optional
• Rose: Round Rose 2-3/8" diameter; Square Rose 2-9/16"
• Door prep: ANSI 115.2 Type 161 for 2-3/4" backset; Type 160 optional
• Handing: Non-handed except Memphis; Orlando, Los Angeles, Houston handed for 211 function only
• Trim: Investment cast stainless steel levers and roses
• Lever designs: Philadelphia, Boston, Miami, Chicago, Houston, Memphis, Orlando, Los Angeles, Dallas, Ball Knob
• Compliance: ADA and ICC/ANSI A117.1 (except ball knob)
• Manufacturer Part Number: TJ176

Available Options

• Finish: 605 - Bright Brass, 606 - Satin Brass, 612 - Satin Bronze, 613E - Dark Oxidized Satin Bronze, 622 - Flat Black, 629 - Bright Stainless Steel, 630 - Satin Stainless Steel
• Lever Style: Philadelphia, Boston, Miami, Chicago, Dallas, Memphis, Orlando, Houston, Los Angeles, Ball Knob
• Rose Style: Round Rose, Square Rose
• Also selected when ordering: Backset, Handing, Strike

Each configuration has its own PDQ part number, for example TJ176PHL605.

Typical Applications

• High-end residential
• Multi-family
• Offices

Frequently Asked Questions

Can the TJ levers be matched to PDQ mortise locks?
Yes. The TJ uses the same lever styles and sectional rose diameter as the PDQ MR Series mortise lock, so a project can use TJ on interior passage and privacy doors and MR mortise locks elsewhere with a matching lever design.

Does the TJ have a keyed function?
No. The TJ is offered in communicating, passage, privacy, double dummy and single dummy functions only, with no keyed entry function.

What is the communicating function used for?
It is used on doors that connect two adjoining rooms, such as hotel connecting rooms, letting either side lock the door from its own room.