You may also like
Pemko 18100 - 180° Aluminum Retainers, Brush Gasketing, 36" Length, 7/8" Height with 1" Nylon Brush Insert
Model: PMK-18100
PEMKO 18100 Door Bottom Sweep
This brush gasketing is supplied with a Nylon Brush ("NB") insert - item number P38100 (available in gray or black).
R
Pemko
Starting at
$36.09
$16.59
PEMKO 18061 Door Bottom Sweep
Restriction: This is designated by UPS as a Large Item. Additional Freight Charges Apply. Please select the appropriate add item below and advise the customer of the freight charge. Large Item Freight 1 to 12 $248.00 Large Item Freight 13 to 24 Large Item Freight 25 to 36 $744.00 $498.0
- When installing pairs of fire doors care must be taken to maintain the requirements of NFPA 80.
- Brush/Meeting Stile Application.
- Also available with soft brush (SB) insert.
- Note: brush should mesh from 1/32" to 1/16".
- This meeting stile is supplied with a Nylon Brush ("NB") insert - item number P516041 (available in gray and black).
Ratings:
- Air Infiltration Tested
- BHMA Certified
- Smoke Tested - UL1784
- Fire Rated - UL10C - Positive Pressure
- Underwriters Laboratory 4L10
- GREENGUARD Gold Certified
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Insert Type:
- Nylon Brush
- Warranty:
- 5 Year
- Subcategory:
- Door Sweeps
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Astragals, Gaskets and Weatherstripping
- Product Type:
- Weatherstripping
- ANSI/BHMA:
- BHMA Certified, Smoke Tested- UL1784, Fire Rated- UL10C- Positive Pressure, Underwriters Laboratory 4L10, GREENGUARD Gold Certified
- Commercial/Residential:
- Commercial
- Product Model:
- 18061
- Product Length:
- 36", 48" or 84"
- Product Dimension:
- W: 1-1/8" , H: 1/4"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Aluminum
Pemko 18061CNB-36 – Frequently Asked Questions
1) What is the Pemko 18061 weatherstrip designed for?
The Pemko 18061 is an aluminum retainer weatherstrip with a 5/8-inch nylon brush seal. It provides effective sealing against dust, dirt, and light air infiltration around door perimeters.
2) What door types is this weatherstrip compatible with?
This weatherstrip works with commercial and residential doors where brush sealing is appropriate. It mounts to door frames or thresholds. Verify clearance requirements before installation.
3) How long is the Pemko 18061 weatherstrip?
The standard length is 180 inches (15 feet). This provides enough material for most standard door applications with minimal waste.
4) What finish does this aluminum weatherstrip have?
The aluminum retainer comes in mill finish. The nylon brush is typically black or dark colored for durability and appearance.
5) How is the Pemko 18061 weatherstrip installed?
The aluminum retainer mounts with screws through pre-drilled holes. Cut to required length using a hacksaw or miter saw. Follow Pemko installation templates for proper positioning.
6) Can this weatherstrip be used on exterior doors?
Yes, the aluminum construction and nylon brush resist weather exposure. However, it provides light-duty sealing. For heavy weather protection, consider rubber or vinyl weatherstripping options.
7) What clearance is needed for the brush seal?
The 5/8-inch brush requires adequate clearance for compression against the door surface. Verify door-to-frame gaps match the brush length for proper sealing performance.
8) How do you maintain this brush weatherstrip?
Clean the nylon brush periodically with a vacuum or soft brush to remove debris. The aluminum retainer requires minimal maintenance. Replace when brush fibers become worn or matted.
9) Are there related Pemko weatherstrip models available?
Yes, Pemko offers various brush weatherstrips in different brush lengths and retainer profiles. Check our Pemko products for alternative sizes and configurations.
10) Can the weatherstrip be cut to custom lengths?
Yes, cut the aluminum retainer to required lengths using standard metal cutting tools. Make clean, square cuts to ensure proper fit and appearance at joints.
11) What tools are needed for installation?
You need a drill, appropriate drill bits, screws, measuring tape, and cutting tools. Use stainless steel or coated screws to prevent corrosion with the aluminum retainer.
How fast can I get the Pemko 18061CNB-36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pemko 18061CNB-36 come with a warranty?
Absolutely. The Pemko 18061CNB-36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pemko 18061CNB-36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pemko 18061CNB-36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.