Pemko 2006 Series Latching Pan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.81
Pemko 2006 Series Latching Panic Saddle Threshold cross-section drawing - 5" width, 1/4" entry height, 1/2" latch side height, 1-5/8" latch ledge, mill finish aluminum

Pemko 2006 Series Latching Panic Saddle Threshold with 3/8" Door Clearance - Fire Rated Aluminum Construction

(No reviews yet) Write a Review

Model: 2006AP 36
$58.81
Selected Finish is
Selected Latching Panic Saddle Threshold is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.81
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pemko 2006 Series Latching Panic Saddle Threshold

The Pemko 2006 Series Rabbeted Latching Panic Saddle Threshold is a fire-rated aluminum saddle threshold with 5" width and 3/8" door clearance, designed for surface-applied vertical rod exit devices. It seals against sound, air infiltration, wind, and debris. Available with ThermoSeal (T) or Pile Brush (P) inserts in 36" and 72" lengths, in Mill Finish or Dark Bronze Anodized Aluminum.

Key Features

  • Door Clearance: 3/8" with 5" width
  • Height: 1/2"
  • Fire Rating: UL10C, Fire Rated
  • Certifications: BHMA, Underwriters Laboratory 4L10, ASTM E90, GREENGUARD Gold Certified (ThermoSeal insert)
  • Insert Options: ThermoSeal or Pile Brush
  • Lengths Available: 36", 72"
  • Finishes: Mill Finish Aluminum, Dark Bronze Anodized Aluminum
  • Material: Aluminum
  • Application: Surface-applied vertical rod exit devices, commercial fire-rated door assemblies

Technical Specifications

  • Model: 2006
  • Product Dimension: H: 1/2", W: 5"
  • Product Length: 36" (standard); 72" available
  • Substrate: Aluminum
  • Insert Type: PemkoPrene or Vinyl Insert
  • ANSI/BHMA: BHMA, Underwriters Laboratory 4L10, ASTM E90, Fire Rated - UL10C, GREENGUARD Gold Certified
  • Commercial/Residential: Commercial

Product Specs

Insert Type:
PemkoPrene or Vinyl Insert
Subcategory:
Thresholds
ANSI/BHMA:
BHMA, Underwriters Laboratory 4L10, ASTM E90, Fire Rated - UL10C, GREENGUARD Gold Certified
Product Group:
Door Trim and Accessories
Product Subgroup:
Door Thresholds
Product Type:
Panic Threshold
Commercial/Residential:
Commercial
Product Model:
2006
Product Length:
36"
Product Dimension:
H: 1/2", W: 5"
Product Category:
Door Trim and Accessories
Product Substrate:
Aluminum
Department:
Door Hardware

Pemko 2006AP 36 – Frequently Asked Questions

1) What threshold do I need for a door with a surface vertical rod exit device?
The Pemko 2006 Series is built for exactly that. It's a rabbeted latching panic saddle, meaning the saddle itself gives the bottom rod of a surface-applied vertical rod device something to latch into, and the rabbet doubles as the door stop while sealing the bottom of the door. A plain flat saddle or a bumper threshold won't do this job, since there's nothing at the sill for the bottom rod to engage. If your exit device is a rim device or a less-bottom-rod (LBR) setup, you don't need a latching saddle at all and should be looking at a standard saddle threshold instead.
2) Is the Pemko 2006 saddle threshold fire rated for a fire door assembly?
Yes. The 2006 is UL10C fire rated in aluminum construction, and the listing data also records BHMA and Underwriters Laboratory 4L10. That's what lets it go under a labeled fire exit door where the opening has to hold its rating. Confirm the door and frame labels cover the full assembly, but the threshold itself carries the UL10C rating.
3) What lengths does the Pemko 2006 threshold come in, and will one cover a pair of doors?
Two lengths are stocked: 36 inches and 72 inches, and both are available in either finish. The 36 inch piece covers a single 3 foot leaf. For a pair of doors, the 72 inch length runs the full opening in one continuous piece, which is what you want under a pair with surface vertical rod devices so both bottom rods land on the same saddle. The 2006 Series itself is made from 24 inches up to 185 inches for openings outside those two sizes.
4) Pile brush or ThermoSeal insert on a Pemko saddle threshold, which should I order?
Both are ordered as part of the threshold, not added later, so pick before you buy. The ThermoSeal version (2006T) is the one to specify when indoor air quality certification matters on the job, because ThermoSeal carries GREENGUARD Gold. The pile brush version (2005P) uses a brush insert, which tends to be the choice on exterior sweeps where grit and debris cross the sill. Pemko's inserts on this series are PemkoPrene or vinyl.
5) Will a saddle threshold help with sound transmission and drafts on an exit door?
Sealing is half the reason the 2006 exists. The insert closes the gap at the bottom of the door against sound, air infiltration, wind and debris, and the series is tested to ASTM E90, which is the sound transmission test method. On a healthcare corridor or a classroom wing where the door bottom is the weak point in an otherwise rated wall, that gap is usually where the leakage is. Pair it with the ThermoSeal insert where thermal and air performance is the priority.
6) Is the Pemko 2006 saddle threshold overkill for an apartment entry door?
It's a commercial-duty threshold, and the deciding factor isn't the building type but the exit device. If the door has a surface vertical rod panic device that latches at the sill, you need a latching saddle like the 2006. A standard apartment entry with a lockset and no bottom rod doesn't, and a simpler saddle or door bottom sweep is the right part there. Multi-tenant residential buildings do use it, typically on the stair and egress doors rather than unit doors.
7) Does the Pemko 2006 come in dark bronze to match anodized storefront doors?
Dark Bronze Anodized Aluminum is one of the two finishes, alongside Mill Finish Aluminum. Both finishes are offered in the 36 inch and 72 inch lengths and with either the pile brush or ThermoSeal insert, so matching a bronze anodized entrance doesn't limit which version you can order. Mill finish is the plain aluminum look and is the usual pick where the threshold is meant to disappear against an aluminum frame.
8) Does this threshold qualify for a green building or LEED-oriented project?
The ThermoSeal insert version carries GREENGUARD and GREENGUARD Gold certification for indoor air quality, which is the credential specifiers ask for on low-emitting materials. Order the 2006T if that documentation has to be in the submittal package. The threshold body itself is aluminum.
How fast can I get the Pemko 2006AP 36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pemko 2006AP 36 come with a warranty?
Absolutely. The Pemko 2006AP 36 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pemko 2006AP 36?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pemko 2006AP 36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!