Pemko

  FS301 Series The Markar FS301 Series Full Surface Continuous Pin and Barrel Hinge can be used to...

  FS/SC309 Series   The Markar FS/SC309 Full Surface Continuous Pin and Barrel Hinge is used to...

  FM3500 Series The 12 gauge Markar FM3500 Series Full Mortise Continuous Pin and Barrel Hinge is edge-mounted with a...

  FM300 Series   The Markar FM300 Series Full Mortise Continuous Pin and Barrel Hinge is edge-mounted and used on high traffic, high abuse...

  FM200 Series   The Markar FM200 Series Full Mortise Continuous Pin and Barrel Hinge is edge-mounted and used in high traffic, high frequency use doors. This...

  FM100 Series   The Markar FM100 Series Full Mortise Continuous Pin and Barrel Hinge is edge-mounted and extruded using...

  DSH1000 The DSH1000 Double Swing Pin and Barrel Hinge allows the door to swing 100-degrees in either direction for emergency access. When...

SPFM SLI Series The SPFM SLI Special Full Mortise Short Leaf Inset Continuous Geared Hinge is designed for door and frame applications where the hinge leaf may interfere with the...

  SPFM-SLF Series   The SPFM-SLF Special Full Mortise Short Leaf Flush Continuous Geared Hinge is designed for door and frame...

  SPFM Series The SPFM Series Special Full Mortise Continuous Geared Hinge is designed for door and frame applications where the hinge leaf may interfere with...

FM-RG...

WT_HS Series The WT_HS Series Wide Throw Half Surface Continuous Geared Hinge is designed mainly for retrofit applications that require extra clearance...

OS_HS Series   The OS_HS Series Offset...

  HS_SF Series The HS_SF Series Half...

HS Series The HS Series Half Surface Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surface of the door and frame...

HS Series The HS Series Half Surface Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surface of the door and frame...

HM Series The HM Series Half Mortise Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surface of the frame and the...

HM Series The HM Series Half Mortise Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surface of the frame and the...

FS CP Series  The FS-CP Full Surface Center Pivot Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surfaces of the door...

FS CP Series The FS-CP Full Surface Center Pivot Continuous Geared Hinge is designed mainly for retrofit work and is applied to the exposed surfaces of the door and...