Philips Lighting 913710268501 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$182.47
$132.47
Philips Lighting 913710268501 CENTIUM ICN4S5490C2LSG35I Programmed-Start Electronic Fluorescent Ballast for F54T5/HO

Philips Lighting 913710268501 CENTIUM ICN4S5490C2LSG35I Programmed-Start Electronic Fluorescent Ballast for F54T5/HO

(No reviews yet) Write a Review

Model: 913710268501
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$182.47
$132.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Philips Lighting CENTIUM ICN4S5490C2LSG35I Programmed-Start Electronic Fluorescent Ballast for F54T5/HO

The Philips Lighting CENTIUM ICN4S5490C2LSG35I is an electronic fluorescent ballast engineered for F54T5/HO lamps rated at 54W, using programmed-start ignition with a 1.5-second nominal ignition time for reliable commercial and outdoor lighting performance. Housed in a Type G metal enclosure measuring 16.7" x 1.7" x 1.18", it accepts a 120 to 277V input at 50 to 60 Hz, drawing 0.86A to 2.00A, and is CSA certified for professional installations. With a 0.98 nominal power factor and support for remote, tandem, and through-wiring configurations up to 20', this ballast is built for demanding retrofit and new-construction lighting projects.

Key Features

  • Lamp Compatibility: Designed for F54T5/HO lamps rated at 54W in a series lamp connection.
  • Durable Metal Housing: Type G housing measures 16.7" x 1.7" x 1.18" with a Hum and Noise Level rating of A.
  • Programmed-Start Ignition: 1.5-second nominal ignition time with automatic restart capability.
  • Wide Voltage Input: Operates on 120 to 277V, 50 to 60 Hz, drawing 0.86A to 2.00A at 234-240W nominal input power.
  • High Power Factor: 0.98 nominal power factor, ballast factor of 1, crest factor of 1.7, and 10% total harmonic distortion.
  • Flexible Remote Wiring: Supports remote, tandem, and through-wiring configurations up to 20' using 18AWG solid wire.

Certifications & Compliance

  • CSA Certified
  • FCC Non-Consumer EMC Immunity Compliant
  • Suitable for Outdoor Use

Technical Specifications

  • Automatic Restart: Yes
  • Ballast Factor (Nom): 1
  • Crest Factor (Nom): 1.7
  • Housing Type: G
  • Hum and Noise Level: A
  • Max Ballast-Lamp Distance (Remote Wiring): 20'
  • Packs Per Outer Box: 6
  • Remote Wiring Configuration Allowed: Yes
  • Suitable for Outdoor Use: Yes
  • T-Case Maximum (Nom): 90°C
  • Tandem Wiring Configuration Allowed: Yes
  • Through Wiring Configuration Allowed: Yes
  • Total Harmonic Distortion (USA): 10%
  • UL Recognized: No
  • Wire Gauge (Nom): 18AWG
  • Wire Strip Length: 0.50/0.375 mm

Typical Applications

  • Commercial and Industrial Fluorescent Lighting Retrofits
  • Outdoor Fixture and Area Lighting Systems
  • Programmed-Start Ballast Replacement Projects
  • Remote and Tandem-Wired Fixture Installations

Why Philips Lighting?

Philips Lighting engineers the CENTIUM ballast series with programmed-start technology, a durable Type G metal housing, and CSA certification for dependable, code-compliant performance. With a high 0.98 power factor and flexible remote, tandem, and through-wiring support up to 20', this ballast is built for professional lighting installations that demand consistent, energy-efficient results across F54T5/HO fixture retrofits.

Manufacturer Resources

Product Specs

Approval Marks:
CSA certificate
Automatic Restart:
Yes
Ballast Factor Nom :
1
Ballast Type:
Electronic Fluorescent
Base Model:
ICN4S5490C2LSG
Color Input Terminals:
No terminals
Color Output Terminals:
No terminals
Connector Type:
No connector
Crestfactor Nom :
1.7
Ean Upc Product:
7.81087E+11
Emc Immunity Standard:
FCC Non-Consumer
Housing Dimensions:
16.7" x 1.7" x 1.18"
Housing Material:
Metal
Housing Type:
G
Hum And Noise Level:
A
Ignition Method:
Programmed Start
Ignition Time Nom :
1.5 s
Input Current Max :
2.00 A
Input Current Min :
0.86 A
Input Frequency:
50 to 60 Hz
Input Power Nom :
240-234 W
Input Voltage:
120 to 277 V
Lamp Connection:
Series
Lamp Type:
F54T5/HO
Material Nr 12nc :
9.1371E+11
Max Ballast Lamp Distance Remote Wiring:
20'
Max Ballast Lamp Distance Tandem Wiring:
Blue & Brown = 20'
Max Ballast Lamp Distance Through Wiring:
Blue & Brown = 20'
Net Weight Piece :
0.894 kg
Number Of Lamps:
3/4 piece/unit
Numerator Packs Per Outer Box:
6
Numerator Quantity Per Pack:
1
Order Code:
9.1371E+11
Order Product Name:
CENTIUM ICN4S5490C2LSG35I
Power Factor Nom :
0.98
Rated Lamp Power:
54 W
Remote Wiring Configuration Allowed:
Yes
Suitable For Outdoor Use:
Yes
T Case Maximum Nom :
90 °C
Tandem Wiring Configuration Allowed:
Yes
Through Wiring Configuration Allowed:
Yes
Total Harmonic Distortion Usa:
10%
Ul Recognized:
No
Wire Gauge Nom :
18AWG mm
Wire Length By Color:
See data sheet
Wire Striplength:
0.50/0.375 mm
Wire Type:
Solid
Product Type:
Fluorescent Ballast
Department:
Electrical

Philips Lighting 913710268501 – Frequently Asked Questions

1) What lamps does the Philips CENTIUM ICN4S5490C2LSG35I ballast run, and how many?
The CENTIUM ICN4S5490C2LSG35I drives F54T5/HO lamps rated 54W each, wired in a series lamp connection, and runs 3 or 4 lamps per unit. It will not operate standard T5 (non-HO) or T8 lamps, so the fixture has to be lamped with 54W T5/HO tubes.
2) Will this Philips T5/HO ballast work on both 120V and 277V circuits?
Yes. It is a universal-voltage unit accepting 120 to 277V at 50 to 60 Hz, so the same part works on a 120V single-family panel or a 277V commercial lighting circuit. Line current runs 0.86A at the high-voltage end up to 2.00A at 120V, which is what you size the branch circuit and lighting contactor against.
3) Will this ballast fit in my existing T5/HO fixture channel?
The metal Type G case measures 16.7 x 1.7 x 1.18 inches, so you need a wireway with at least that much clear length. Type G is the long, low-profile can common in linear T5 strips and high bays. Measure the existing ballast channel before ordering; a short 9-inch can will not take it.
4) How far can the ballast sit from the lamps on a remote-mounted install?
Up to 20 feet between ballast and lamp is allowed in remote wiring, and the same 20 foot limit applies on the blue and brown leads for tandem and through wiring. Use 18AWG solid wire for those runs. That lets you mount the ballast in an accessible box and feed a cove, sign, or high fixture without pulling the ballast down for service.
5) Can I use this ballast in an outdoor or unheated fixture?
Yes, the CENTIUM ICN4S5490C2LSG35I is rated suitable for outdoor use inside a suitable fixture enclosure. Watch the case temperature limit: 90 degrees C maximum at the T-case point. In a hot, enclosed outdoor housing that is the number that decides ballast life.
6) Why choose a programmed-start ballast over instant start for T5/HO fixtures?
Programmed start preheats the cathodes before striking the arc, which protects lamp electrodes where the lights cycle frequently, as with occupancy sensors, stairwells, and daylight controls. This one uses a 1.5-second nominal ignition time and restarts automatically after a lamp is replaced or power is restored. Instant start costs less lamp life under heavy switching; if your fixtures run for long uninterrupted hours instead, instant start is the usual choice.
7) Does this ballast come with quick-connect terminals or a plug connector?
No. The CENTIUM ICN4S5490C2LSG35I ships with no input terminals, no output terminals, and no connector, so it is a leads-out unit you wire and splice yourself. Plan on wire nuts or push-in connectors at the fixture, and strip the leads to 0.50/0.375 mm per the spec.
8) What approvals does the Philips CENTIUM ICN4S5490C2LSG35I carry?
It holds a CSA certificate and meets FCC Non-Consumer EMC immunity requirements. It is not UL Recognized, so if your facility spec or AHJ requires a UL Recognized component specifically, this is not the part to submit.
9) Is this ballast quiet enough for an office or library ceiling?
It carries a Hum and Noise Level rating of A, the quietest class on the fluorescent ballast scale, so it suits classrooms, offices, and other low-ambient-noise spaces where a buzzing ballast gets called in as a complaint.
10) What is the correct order designation for this Philips T5/HO ballast for a submittal?
Write it as Philips CENTIUM ICN4S5490C2LSG35I, base model ICN4S5490C2LSG. It is an electronic fluorescent ballast for three or four 54W F54T5/HO lamps. Cartons hold six pieces per outer box, one ballast per pack, and each ballast weighs 0.894 kg.
How fast can I get the Philips Lighting 913710268501 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Philips Lighting 913710268501 come with a warranty?
Absolutely. The Philips Lighting 913710268501 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Philips Lighting 913710268501?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Philips Lighting 913710268501 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!