Thomas & Betts T47CG-TB Pre-As...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$344.25
Thomas & Betts T47CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

Thomas & Betts T47CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

(No reviews yet) Write a Review

Model: T47CG-TB
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$344.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Pre-Assembled Form 7 Conduit Body, Cover & Gasket

  • Features

    • T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
    • Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.
    • Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
    • Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.
    • Bodies are designed with a flat back, allowing more cubic inch capacity.


T47CG-TB - spec sheet

Manufacturer Resources

Product Specs

Form:
7
Hub Size:
1-1/4 Inch
Outer Dimensions Inches :
8.5x4.5x8.5
Outer Quantity:
2
Product Group:
Electrical Boxes
Standard:
UL E2969
Unspsc:
39131708 Electrical conduit fitting body
Weight Uom:
3.25 lbs. Each
Department:
Electrical
Product Subgroup:
Box Covers
Product Type:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Finish:
Zinc Plated with Epoxy Powder Coat
Product Details:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Material:
Gray Iron

Thomas & Betts T47CG-TB – Frequently Asked Questions

1) Will a Thomas & Betts T47CG-TB Form 7 conduit body fit Crouse-Hinds or Appleton covers?
Yes. T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton Form 7 bodies and covers, so the T47CG-TB body will take their Form 7 cover and their body will take this one. Handy when you are patching into an existing run that was built with another brand and you only need to replace one half.
2) What conduit size does the T47CG-TB conduit body take?
It is a 1-1/4 inch hub size, so it lands on 1-1/4 inch rigid or IMC conduit runs. Anything larger or smaller needs a different catalog number in the Form 7 line; do not try to bush it down at the hub.
3) Is the T47CG-TB rated for outdoor or wet locations, and does it come with a gasket?
It ships pre-assembled with the cover and gasket already on the body, which is what seals the cover joint on exterior and damp installs. The finish is zinc plated with an epoxy powder coat, described as triple-layer protection including two layers of epoxy, for corrosion resistance. It is UL listed under file E2969.
4) What is a T type conduit body used for on a job?
A conduit body like the T47CG-TB gives you a pull and access point in a conduit run: it makes 90 degree bends, serves as a mounting outlet for wiring devices and lighting fixtures, and lets you get back at the conductors later for maintenance or system changes. The T body has four openings, so it is the one you use where a run branches rather than simply turns.
5) Does the T47CG-TB give extra wire fill room for large conductors?
The body is built with a flat back, which increases the cubic inch capacity compared with a rounded back. The interior is also smooth, so cable jacket, insulation and conductors are not cut up during the pull, and the pull itself takes less effort and time.
6) How much clearance do I need to install a T47CG-TB Form 7 body?
Outer dimensions are 8.5 x 4.5 x 8.5 inches, so allow for that envelope plus room to swing the cover and get a wrench on the hubs. Worth checking on tight wall cavities or where the run sits close to structure.
7) Do I have to order the cover and gasket separately for the T47CG-TB?
No. The T47CG-TB is sold pre-assembled with the body, cover and gasket together under one part number, so there is nothing else to specify to close it out. Outer quantity is 2 per carton.
8) What material is the T47CG-TB conduit body, and how heavy is it to hang?
Gray iron, weighing 3.25 lbs each. That is a cast iron body, not aluminum or die cast, so plan your support accordingly on a vertical or overhead run.
How fast can I get the Thomas & Betts T47CG-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts T47CG-TB come with a warranty?
Absolutely. The Thomas & Betts T47CG-TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts T47CG-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts T47CG-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!