Thomas & Betts TB37CG-TB Pre-A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$267.10
$255.25
Thomas & Betts TB37CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

Thomas & Betts TB37CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

(No reviews yet) Write a Review

Model: TB37CG-TB
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$267.10
$255.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Pre-Assembled Form 7 Conduit Body, Cover & Gasket

  • Features

    • T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
    • Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
    • Bodies are designed with a flat back, allowing more cubic inch capacity.
    • Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.
    • Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.


TB37CG-TB - spec sheet

Manufacturer Resources

Product Specs

Form:
7
Hub Size:
1 Inch
Outer Dimensions Inches :
6.2x4.7x8.6
Outer Quantity:
2
Product Group:
Electrical Boxes
Standard:
UL E2969, CSA
Unspsc:
39131708 Electrical conduit fitting body
Weight Uom:
2.91 lbs. Each
Department:
Electrical
Product Subgroup:
Box Covers
Product Type:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Finish:
Zinc Plated with Epoxy Powder Coat
Product Details:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Material:
Gray Iron

Thomas & Betts TB37CG-TB – Frequently Asked Questions

1) Can I use a Thomas & Betts Form 7 conduit body to replace a Crouse-Hinds or Appleton Form 7?
Yes. T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton Form 7 bodies and covers, so you can swap the whole body or just reuse a cover across those brands as long as the form and hub size match.
2) Is this conduit body listed for use on a permitted commercial job?
The TB37CG-TB carries UL listing E2969 and CSA certification, which is what an inspector or institutional spec will look for on a conduit body.
3) Does the TB37CG-TB come with the cover and gasket, or do I order those separately?
It ships pre-assembled with the body, cover and gasket together, so there is nothing else to add to close it up. You still supply your own conduit, locknuts or bushings and any mounting hardware for the wall or strut.
4) Will a gray iron conduit body hold up in a damp or corrosive outdoor location?
The casting is gray iron finished zinc plated with an epoxy powder coat, described as triple layer protection including two layers of epoxy coating to stop corrosion. That is the finish package typically specified for wet, outdoor and corrosive industrial areas rather than a plain malleable iron body.
5) How much room do I need to leave for a Form 7 conduit body in a tight chase?
Plan on an envelope of 6.2 x 4.7 x 8.6 inches and about 2.91 lbs per piece. Cast iron at that weight usually wants a strap or strut support near the body rather than hanging on the conduit alone in an overhead run.
6) Why choose a Form 7 conduit body instead of running a factory elbow?
A conduit body turns a 90 degree bend and gives you a pull point at the same time. Crews use them to access conductors during the pull, for maintenance later, and as a mounting outlet for wiring devices and lighting fixtures. An elbow gives you the bend with no access. The flat back design on these bodies also adds cubic inch capacity and removes rough internal surfaces that can cut cable jacket or insulation while pulling.
7) How many TB37CG-TB conduit bodies come in a carton?
They pack two per outer carton, which is worth knowing if you are pulling stock for a multi-unit or facility job and want whole cartons rather than loose pieces.
How fast can I get the Thomas & Betts TB37CG-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts TB37CG-TB come with a warranty?
Absolutely. The Thomas & Betts TB37CG-TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts TB37CG-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts TB37CG-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!