You may also like
Pull Rope 3-Strand Polypropylene 3/8" 600ft
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
Metallics M38600 – Frequently Asked Questions
1) What size and length is the Metallics M38600 pull rope?
The Metallics M38600 is a 3/8 inch diameter polypropylene pull rope supplied in a 600 foot length, built in a 3-strand twisted construction. One length, one diameter, ordered under part number M38600.
2) Is polypropylene pull rope the right choice for pulling wire through conduit, or should I use pull tape?
A 3-strand twisted polypropylene rope like the M38600 is the general-purpose choice for pulling conductors through conduit and for rigging the pull. At 3/8 inch it is a heavier line than a flat pull tape, so it suits larger raceways and bigger cable bundles where you want something you can grip and tie off. Flat woven pull tape is the better pick in small-diameter conduit where a round 3/8 inch rope eats usable area, and where you want a printed footage marker.
3) Does the Metallics M38600 come on a spool or in a coil, and can I order a shorter length?
It is a single 600 foot put-up sold as one item under part number M38600. There is no shorter or longer option under this part number, so if a job needs less, you cut from the 600 feet; if it needs more, you order additional units.
4) Is polypropylene pull rope OK to leave in a damp or underground duct bank?
Polypropylene is the standard rope material for this work because it does not absorb water and it resists rot and mildew, which is why it gets used for leave-in-place pull lines in wet and underground ducts. The M38600 is a polypropylene rope, 3-strand, 3/8 inch.
5) I'm stocking a truck for electrical rough-in. What is the Metallics M38600 used for?
It is general pulling line for electrical work, stocked as an electrical supply item rather than door or plumbing hardware. Typical uses are pulling conductors through conduit, setting a leave-in line for future pulls, and general tie-off and rigging on the jobsite. 3/8 inch diameter, 600 feet per unit.
How fast can I get the Metallics M38600 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics M38600 come with a warranty?
Absolutely. The Metallics M38600 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics M38600?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics M38600 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.