You may also like
Greenlee 50314866 PVC Heating Blanket for up to 1-1/2"
Model: GRN-50314866
PVC Heating Blanket for up to 1-1/2"
Features
Make bends, offsets or saddles in PVC fast and easy Easy to use: wrap blanket around PVC, secure with hook and loop strap Built-In stiffeners help keep...
Greenlee
$515.47
$465.47
Greenlee PVC Heating Blanket 1/2" to 1-1/2" 200W Professional Bending Tool
Model: GRN-860-1-1/2
Greenlee PVC Heating Blanket 1/2" to 1-1/2" 200W Professional Bending ToolProfessional PVC bending solution with controlled heating technologyThe Greenlee PVC Heating Blanket delivers...
Greenlee
$515.47
$441.44
PVC Heating Blanket for 2"-3"
Features
- Make Bends, Offsets Or Saddles In PVC Fast And Easy Easy To Use: Wrap Blanket Around PVC, Secure With Hook And Loop Strap Built-In Stiffeners Help Keep The Blanket Tight To The PVC Surface Remove Blanket And Form Bend By Hand Controlled, Even Heating For Uniform Bending Heavy-Duty Cord And Thermostat For Long Life Temperature Over 300° F (149° C)
Manufacturer Resources
Product Specs
- Bend Radius:
- 13"
- Capacity:
- 2" to 3" PVC
- Country Of Origin:
- US
- Packaged Weight:
- 3.73
- Power Source:
- 120 VAC
- Product Height:
- 3.3 IN
- Product Length:
- 35.5 IN
- Product Material:
- Silicon Rubber compound
- Product Size:
- 30.000'' X 13-1/4''
- Product Type:
- PVC Bending Blanket
- Product Wattage:
- 800 WATT
- Product Width:
- 7.3 IN
- Voltage Rating:
- 120V
- Volume:
- 855.1949999999999 CI
- Department:
- Electrical
- Product Subgroup:
- Conduit Benders
- Product Group:
- Electrical Installation Tools
- Application:
- PVC Bending
Greenlee 50314874 – Frequently Asked Questions
1) How do you use a PVC heating blanket to make a bend?
Wrap the blanket around the conduit, secure it with the hook and loop strap, and let it heat. Built-in stiffeners hold the blanket tight against the PVC so heating stays even. Once the pipe is pliable, pull the blanket off and form the bend, offset or saddle by hand.
2) How tight a bend can I make with the Greenlee 50314874?
The blanket is rated for a 13 inch bend radius. That's the tightest sweep you should form with it on 2 to 3 inch PVC; going tighter risks kinking or flattening the conduit wall.
3) How long a section of conduit does this blanket heat at once?
The heating area measures 30 inches by 13-1/4 inches, so you're softening a 30 inch run of pipe in one wrap. For a long sweep or multiple offsets on the same stick, you reposition and reheat.
4) Will the blanket get hot enough to soften Schedule 40 PVC conduit?
It runs over 300 degrees F (149 C) with a thermostat controlling the cycle, which is what gives the even heating needed for a uniform bend rather than scorched spots. The element is a silicon rubber compound, and the cord and thermostat are heavy duty for repeated jobsite use.
How fast can I get the Greenlee 50314874 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Greenlee 50314874 come with a warranty?
Absolutely. The Greenlee 50314874 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Greenlee 50314874?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Greenlee 50314874 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.