Klein Tools 671-6 Rapi-Driv® S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.49
$13.53
Klein Tools 671-6 Rapi-Driv® Screwdriver, 1/4-Inch Cabinet Tip, 6-Inch Shank

Klein Tools 671-6 Rapi-Driv® Screwdriver, 1/4-Inch Cabinet Tip, 6-Inch Shank

(No reviews yet) Write a Review

Model: 671-6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.49
$13.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Rapi-Driv® Screwdriver, 1/4-Inch Cabinet Tip, 6-Inch Shank

  • Warnings

    • Always wear approved eye protection.
    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.

  • Features

    • Cushion-Grip™ handle for greater torque and comfort
    • Made in USA
    • Screwdriver's crank-action handle spins screws fast with one hand
    • Meets or exceeds applicable ASME / ANSI specifications
    • Premium chrome-plated for smooth feel and corrosion resistance
    • Special heat-treated shafts
    • Internal flanges inside handle provide solid, twist-resistant blade anchor


671-6 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Color:
Black
Insulated:
No
Magnetic:
No
Overall Length:
9.75" (24.8 cm)
Shank Length:
6" (15.2 cm)
Shank Type:
Round Rapi-Driv®
Tip Size:
1/4" (6.4 mm)
Tip Type:
Cabinet
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Height:
0.9900 in
Product Material:
Steel
Product Weight:
0.2000 lbs
Product Width:
2.3400 in
Product Depth:
9.7500 in
Product Type:
Screwdriver
Country of Origin:
United States

Klein Tools 671-6 – Frequently Asked Questions

1) Is the Klein Tools 671-6 Rapi-Driv screwdriver safe to use on live electrical work?
No. The 671-6 is not insulated and will not protect against electrical shock, so it must not be used on energized circuits. If you need to work live, you need a VDE-rated 1000V insulated screwdriver instead, not this one. Klein also warns against using it to pry or chisel, and to wear approved eye protection.
2) Will a 1/4-inch cabinet tip screwdriver fit into a recessed or counterbored screw hole?
Yes, that is what a cabinet tip is for. The 671-6 has a 1/4-inch (6.4 mm) cabinet tip, meaning the blade is ground parallel with no flare at the tip, so it drops into a counterbored or recessed slotted screw without the shoulder binding on the hole. A keystone tip of the same width flares out and will catch.
3) What does the Rapi-Driv crank action on the Klein 671-6 actually do for me on the job?
The handle cranks like a brace, so you spin the screw with one hand in a continuous motion instead of regripping on every quarter turn. That matters when you are driving long runs of screws, like device plates, panel covers or cabinet hardware, and you need your other hand on the box or the ladder. The shank is the round Rapi-Driv type that makes that spinning action possible.
4) How deep can the Klein 671-6 reach into a panel or enclosure?
The shank is 6 inches (15.2 cm) long, with an overall length of 9.75 inches (24.8 cm) including the handle. That gives you enough blade to reach terminal screws set back in a panel or a deep device box while still keeping the crank handle clear of the enclosure edge. For tight work right at the face of a box, a shorter stubby driver is easier to control.
5) What is the exact part number to order the 6-inch Klein Rapi-Driv with the 1/4-inch cabinet tip?
Order Klein Tools 671-6. That is the single model configuration: 1/4-inch cabinet tip, 6-inch round Rapi-Driv shank, steel blade, black handle.
6) Does the Klein 671-6 screwdriver tip hold screws magnetically?
No, the tip is not magnetized. You hold the screw to start it, or back it with a magnetic screw holder. Worth knowing before you order if you are working overhead or over an open panel where a dropped screw costs you time.
7) Will the Klein 671-6 handle hold up to repeated hard driving, or will the blade spin loose?
The handle has internal flanges that anchor the blade against twisting, and the shaft is specially heat treated. The Cushion-Grip handle is built for torque and comfort rather than just grip, and the blade is premium chrome plated for corrosion resistance. Klein states it meets or exceeds applicable ASME/ANSI specifications, and it is made in the USA.
8) What are the shipping dimensions and weight of the Klein 671-6 Rapi-Driv screwdriver?
Klein lists the 671-6 at 9.75 x 2.34 x 0.99 inches and 0.2 lbs. The 2.34 inch figure reflects the swing of the crank handle, which is worth noting if you are organizing it into a pouch or a drawer insert sized for straight-shank drivers.
How fast can I get the Klein Tools 671-6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 671-6 come with a warranty?
Absolutely. The Klein Tools 671-6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 671-6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 671-6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!