Klein Tools 670-3 Rapi-Driv® S...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$66.19
$13.06
Klein Tools 670-3 Rapi-Driv® Screwdriver, 3/16-Inch Cabinet Tip, 4-Inch Shank

Klein Tools 670-3 Rapi-Driv® Screwdriver, 3/16-Inch Cabinet Tip, 4-Inch Shank

(No reviews yet) Write a Review

Model: 670-3
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$66.19
$13.06
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Rapi-Driv® Screwdriver, 3/16-Inch Cabinet Tip, 4-Inch Shank

  • Warnings

    • Do NOT use to pry or chisel.
    • NOT insulated. Will NOT protect against electrical shock.
    • Always wear approved eye protection.

  • Features

    • Cushion-Grip™ handle for greater torque and comfort
    • Made in USA
    • Internal flanges inside handle provide solid, twist-resistant blade anchor
    • Premium chrome-plated for smooth feel and corrosion resistance
    • Special heat-treated shafts
    • Meets or exceeds applicable ASME / ANSI specifications
    • Screwdriver's crank-action handle spins screws fast with one hand


670-3 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Handle Color:
Black
Insulated:
No
Item Depth:
7.7500 in
Item Height:
0.9000 in
Item Weight:
0.1500 lbs
Item Width:
2.3670 in
Magnetic:
No
Overall Length:
7.75" (19.7 cm)
Shank Length:
4" (10.2 cm)
Shank Type:
Round Rapi-Driv®
Tip Size:
3/16" (4.8 mm)
Tip Type:
Cabinet
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Steel
Product Weight:
2.4 oz (68 g)
Product Type:
Screwdriver
Product Height:
0.9 in
Product Depth:
7.75 in
Country Of Origin:
United States
Product Width:
2.367 in

Klein Tools 670-3 – Frequently Asked Questions

1) What does the Rapi-Driv crank handle actually do, and when is it better than a standard screwdriver?
The Rapi-Driv handle cranks: you spin the screw with one hand in a continuous rotary motion instead of repeated quarter turns. That pays off when you are running a lot of long, low-torque screws, like device screws into boxes or cabinet hardware, and you need one hand free to hold the plate or box. For high-torque seating or breaking loose a tight screw, a fixed-handle Cushion-Grip driver gives you better control; the 670-3 has a 4 inch round Rapi-Driv shank with a Cushion-Grip handle for the spin work.
2) What is a cabinet tip and will the 3/16-inch tip on the Klein 670-3 fit down into a recessed screw hole?
A cabinet tip is a slotted blade ground with parallel sides, so the tip is no wider than the shank. That lets it drop into a counterbored or recessed hole without the flare of a keystone tip catching on the edges. The 670-3 carries a 3/16 inch (4.8 mm) cabinet tip on a 4 inch shank, which suits slotted device and terminal screws and cabinet hardware.
3) How long is the Klein 670-3 overall, and will it fit in a pouch or tool bag?
Overall length is 7.75 inches (19.7 cm), with 4 inches of that being shank, and it weighs 2.4 oz (68 g). That is a standard pouch-length driver. Keep in mind the crank handle swings out to the side when in use, so you need a little clearance around the screw, roughly the handle width of 2.367 inches.
4) Can I use the Klein 670-3 to pry open a panel or scrape a joint?
No. Klein states plainly not to use it to pry or chisel. The blade is heat-treated steel anchored in the handle by internal flanges, which resists twisting under torque, but the Rapi-Driv crank mechanism and the slim round shank are not built for side loads. Use a pry bar or a chisel for that, and wear approved eye protection either way.
5) Does the Klein 670-3 meet any recognized tool standard, and will it hold up in a damp or outdoor environment?
Klein states the 670-3 meets or exceeds applicable ASME/ANSI specifications. The shank is steel, premium chrome-plated for corrosion resistance and a smooth feel, which is what you want for a driver that lives in a van or a damp mechanical room. Handle is black Cushion-Grip.
6) What is the exact part number for the Klein 3/16-inch cabinet tip Rapi-Driv screwdriver?
Klein Tools 670-3. That is the full manufacturer part number, covering the 3/16 inch cabinet tip with a 4 inch Rapi-Driv round shank, 7.75 inches overall. It is made in the USA. Adjacent models in the 670 Rapi-Driv family differ by tip size and shank length, so order by the full 670-3 number rather than just 670.
7) Is the Klein 670-3 screwdriver tip magnetic?
No, the 670-3 tip is not magnetized. You will need to start and hold slotted screws by hand, which matters on overhead work or when dropping a screw into a box is a problem. If you want screw retention, use a magnetizer or a magnetic-tip driver instead.
How fast can I get the Klein Tools 670-3 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 670-3 come with a warranty?
Absolutely. The Klein Tools 670-3 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 670-3?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 670-3 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!