You may also like
Manufacturer Resources
Product Specs
- Buy American Act Compliant:
- No
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Valves
- Product Type:
- General Valve
Watts NH-BL-2X1.5-REDUCER – Frequently Asked Questions
1) What size pipe does the Watts NH-BL-2X1.5-REDUCER no-hub reducer connect?
It steps 2 inch no-hub down to 1-1/2 inch no-hub. Both ends are plain-end no-hub (hubless) connections, so they join with no-hub couplings and clamps rather than being threaded or solvent welded.
2) Does the Watts NH-BL-2X1.5-REDUCER meet Buy American Act requirements for a government job?
No. This Watts Blueline no-hub reducer is not Buy American Act compliant, so it will not satisfy a BAA-restricted federal or publicly funded specification.
3) Is anything else needed to install the Watts Blueline 2 x 1-1/2 reducer?
The reducer is the fitting only. You supply a no-hub coupling with its shield and clamp band at each end to make up the joints, sized 2 inch on the inlet side and 1-1/2 inch on the outlet side.
4) Can I use a no-hub reducer like this on a pressurized water line?
No. Blueline no-hub fittings are drain, waste and vent fittings. The hubless joint relies on a clamped shield coupling and is intended for gravity DWV service, not for pressurized supply piping. Use threaded, press or solvent-weld pressure-rated fittings on a water line.
5) What is the correct part number to order for the Watts Blueline 2 x 1-1/2 no-hub reducer?
Order Watts part NH-BL-2X1.5-REDUCER. That single manufacturer number covers the 2 inch by 1-1/2 inch Blueline no-hub reducer; there are no finish or material options to specify with it.
How fast can I get the Watts NH-BL-2X1.5-REDUCER delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Watts NH-BL-2X1.5-REDUCER come with a warranty?
Absolutely. The Watts NH-BL-2X1.5-REDUCER is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Watts NH-BL-2X1.5-REDUCER?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Watts NH-BL-2X1.5-REDUCER from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.