You may also like
REPLCORD, 14/3 SJTW 9' BLACK SW
Manufacturer Resources
Product Specs
- Amps:
- 15 Amps
- Batteries Required :
- No
- Certifications And Listings:
- cULus
- Compact Fluorescent Light Bulb :
- No
- Cord Construction Style Tubed Pressure Filled :
- Filled
- Csa Certified:
- No
- Direct Burial:
- No
- Energy Guide Label Required:
- No
- Flame Retardant:
- No
- Gauge:
- 14/3
- Gauge Conductor:
- 14/3
- Grounded:
- Yes
- Indoor Outdoor:
- Indoor
- Insulation Material Pvc Tpe Rubber :
- PVC
- Item Depth:
- 3
- Item Height:
- 1.3
- Item Length:
- 13.5
- Item Volume Cubic Feet:
- 0.02949
- Item Weight:
- 0.92
- Item Width:
- 2.15
- Master Carton Length:
- 14
- Master Pack Height:
- 7
- Max Min Temperature F :
- -40 to 140 F
- Maximum Temp C:
- 60
- Maximum Temp F:
- 140
- Minimum Temp C:
- -40
- Minimum Temp F:
- -40
- Nmfc Classification:
- 61490
- Number Of Outlets:
- 0
- Od:
- .365"
- Package Length:
- 3
- Packaging Type:
- Sleeve
- Plug Color:
- Black
- Plug Configuration:
- NEMA 5-15P
- Shielded:
- No
- Solar Powered :
- No
- Swing Arm :
- No
- Tier Qty Pallet:
- 12
- Wattage Watts :
- 1875
- Wet Location Use:
- No
- Product Voltage:
- 125
- Product Color:
- Black
- Product Material:
- SJTW
Southwire 97198808 – Frequently Asked Questions
1) What is the Southwire 97198808 replacement cord rated for in amps and watts?
The Southwire 97198808 replacement cord is rated 15 amps at 125 volts, which works out to 1875 watts. That covers most portable tools and appliances on a standard 15 amp branch circuit, but it is the ceiling, so add up the nameplate draw of anything you plug into it before you commit.
2) Does this Southwire replacement cord have a plug on both ends or just one?
One end only. It is a replacement cord with a molded NEMA 5-15P male plug in black; the other end is bare so you wire it into the tool, appliance, or fixture you are repairing. It is not an extension cord and it has no receptacles on it.
3) Is this a three-wire grounded cord I can use on a tool with a grounded plug?
Yes. The 14/3 construction gives you three 14 AWG conductors, hot, neutral, and ground, and the cord is grounded with a three-prong NEMA 5-15P plug. That makes it the right replacement for a Class I grounded tool or appliance. If the equipment you are rewiring is two-wire ungrounded, you only need a two-conductor cord.
4) What is the outside diameter of this 14/3 cord, and will it fit my strain relief bushing?
The jacket measures .365 inch outside diameter. Match that against the clamp or strain-relief bushing on the tool housing: a bushing cut for a thinner 16 AWG cord will not close on .365 inch, so size the grommet or cord grip to that figure when you reassemble.
5) What temperature range can this replacement cord handle?
Minus 40 F to 140 F, with the 140 F top end equal to 60 C. That is the usual 60 C conductor rating for PVC-insulated cord, so keep it away from motor housings, heaters, and anything else that runs hotter than that.
6) Is this Southwire cord UL listed for a commercial or institutional facility?
It carries cULus listing, which covers both the US and Canadian listings and is what a facilities or MRO inspector normally wants to see on a cord-and-plug repair. The record does not show a separate CSA certification.
7) What is the exact part number to order this black 9 foot Southwire replacement cord?
Southwire manufacturer part number 97198808, a 9 foot 14/3 SJTW replacement cord in black. There is one configuration, so no finish or length choice to make on the order.
How fast can I get the Southwire 97198808 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Southwire 97198808 come with a warranty?
Absolutely. The Southwire 97198808 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Southwire 97198808?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Southwire 97198808 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.