ABB RH T-Series PowerMark Gold...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.09
ABB RH T-Series PowerMark Gold Bond Screw Kit

ABB RH T-Series PowerMark Gold Bond Screw Kit

(No reviews yet) Write a Review

Model: TBS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ABB RH T-Series Bond Screw Kit

The ABB RH T-Series Bond Screw Kit is a PowerMark Gold accessory engineered for panelboards rated 100-200 A, supplying the bonding hardware needed to establish a proper bonded-neutral connection inside compatible ABB PowerMark Gold load centers. This kit is packaged 1 EA, making it a simple, focused solution whether you are completing a new PowerMark Gold panelboard installation or servicing an existing one. Because bonding hardware is a small but code-critical part of any panelboard, having the correct ABB-specified kit on hand helps electricians and contractors keep installations organized, consistent, and ready for inspection.

Key Features

  • Amperage Range: Designed for PowerMark Gold panelboards rated 100-200 A, matching the kit to the correct service size.
  • PowerMark Gold Compatibility: Purpose-built as an accessory for the ABB PowerMark Gold load center line, helping ensure a correct fit versus generic hardware.
  • Bonding Function: Provides the bond screw hardware required to establish the bonded-neutral connection called for in compatible panelboard installations.
  • RH T-Series Design: Part of the RH T-Series accessory family for PowerMark Gold panelboards, keeping hardware consistent across a job or service call.
  • Convenient Packaging: Supplied 1 EA, making it easy to stock a dedicated kit for each panelboard replacement or new install without ordering excess hardware.
  • Straightforward Replacement: A practical option for electricians who need to replace a missing or damaged bond screw kit during a panel upgrade or troubleshooting call.

Technical Specifications

  • Country of Origin: UKN.

Typical Applications

  • PowerMark Gold Panelboard and Load Center Wiring
  • Residential and Light Commercial Electrical Installations
  • Grounding and Bonding Hardware Upgrades
  • Panelboard Service, Repair, and Replacement Work
  • Renovation and New Construction Panelboard Setup

Why ABB?

ABB is a well-established manufacturer of electrical distribution equipment, and the RH T-Series Bond Screw Kit reflects that standard by delivering PowerMark Gold-specific bonding hardware rather than a generic substitute. Using the correct ABB-specified kit for 100-200 A PowerMark Gold panelboards helps installers maintain the bonded-neutral connection panelboards depend on for safe, code-compliant operation. For contractors and electricians who standardize on ABB PowerMark Gold panelboards, keeping genuine ABB accessories like this bond screw kit on the truck helps every installation and service call go smoothly.

Manufacturer Resources

Product Specs

Product Type:
Bond Screw Kit
Series:
T-Series
Amperage Rating:
100-200A
Country of Origin:
UKN
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Parts & Accessories

ABB TBS – Frequently Asked Questions

1) What is the ABB TBS bond screw kit used for in a load center?
The ABB RH T-Series TBS bond screw kit supplies the bonding hardware that ties the neutral bar to the enclosure in an ABB PowerMark Gold panelboard. That bonded-neutral connection is only made at service equipment; on a downstream subpanel the neutral stays isolated from ground, so the bond screw is left out. Use it when the panel is the service disconnect, or when you are replacing a screw that went missing during a panel swap.
2) Will the ABB TBS bond screw kit fit my 150 amp PowerMark Gold panel?
Yes. The TBS kit is specified for PowerMark Gold panelboards rated 100 to 200 A, so a 150 A panel falls inside that range. It is matched to the PowerMark Gold line rather than being generic bonding hardware, so if your panel is a different ABB or other-brand series, check the manufacturer's accessory listing for that enclosure instead.
3) Can I just use a hardware-store green screw instead of the ABB bond screw kit?
The TBS kit is built as a PowerMark Gold accessory so the screw matches the tapped bonding hole in that enclosure and the neutral bar it lands in. A generic screw may not thread correctly or seat fully, and inspectors on service equipment look for the listed bonding means that came with the panel. That is the reason to order the ABB-specified kit rather than substituting.
4) Is the ABB TBS a bond screw kit or a ground bar kit?
It is a bond screw kit, not a ground bar. The TBS provides only the screw hardware that bonds the neutral to the can. If you need separate landing points for equipment grounding conductors, particularly in a subpanel where neutral and ground must stay separate, you need a ground bar kit sized for your PowerMark Gold enclosure in addition to or instead of this.
5) What ABB part number should I order for a PowerMark Gold bond screw?
The manufacturer part number is TBS, from ABB's RH T-Series accessory family for PowerMark Gold panelboards. That is the number to quote when matching an existing panel or stocking replacements for service calls.
6) How many bond screws come in the ABB TBS kit?
It is packaged 1 EA, so you are buying one kit per panel. If you are wiring several PowerMark Gold load centers on the same job, order one per enclosure rather than expecting a multi-pack.
How fast can I get the ABB TBS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ABB TBS come with a warranty?
Absolutely. The ABB TBS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ABB TBS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ABB TBS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!