You may also like
Ridgid Model 5 Aluminum Strap Wrench, 17" x 1-3/4" Nylon Strap, 31365
The Ridgid Model 5 Strap Wrench (SKU 31365) is built for gripping and turning polished, plated, or coated pipe without marring the surface. This lightweight aluminum wrench pairs with a 17" x 1-3/4" woven nylon strap treated with powdered rosin for an extra-tight, non-slip grip, and it is rated for maximum tightening grip on pipe up to 5 IN / 125 MM in diameter. At just 2 lbs., it reduces user fatigue during extended field use while still delivering the durability professional plumbers and pipefitters expect from Ridgid hand tools.
Key Features
- Capacity: Rated for maximum tightening grip on pipe up to 5 IN / 125 MM in diameter.
- Strap Size: 17" x 1-3/4" woven nylon strap treated with powdered rosin for an extra-tight grip on polished pipe.
- Durable Construction: Aluminum wrench body manufactured using U.S. steel components for long-term jobsite durability.
- Lightweight Design: Weighs only 2 lbs. for less fatigue during repeated use in the field.
- Surface-Safe Grip: Non-marring strap design makes this wrench ideal for polished, plated, or coated pipe surfaces where pipe wrenches would damage the finish.
- Model Number: Identified as Model 5 within the Ridgid strap wrench lineup.
Technical Specifications
- Capacity Max: 5 IN / 125 MM
- Model Number: 5
- Product Warranty: Full Lifetime Warranty
- Country of Origin: United States
Typical Applications
- Turning and gripping polished or plated pipe without marring the finish
- Plumbing and pipefitting installation and repair
- Residential and commercial pipe assembly work
- Field service applications requiring a lightweight, low-fatigue tool
- General maintenance on coated or decorative pipe surfaces
Why Ridgid?
Ridgid strap wrenches are manufactured using U.S. steel and backed by a Full Lifetime Warranty, reflecting the brand's commitment to durable, dependable hand tools for professional trades. The powdered-rosin-treated nylon strap and lightweight aluminum body combine grip strength with reduced fatigue, making the Model 5 a reliable choice for plumbers and pipefitters who need dependable, surface-safe pipe turning performance on every job.
Manufacturer Resources
Product Specs
- list_batch:
- RID-20260924
- Product Type:
- Strap Wrench
- Configuration:
- 17" x 1-3/4" Strap
- Country Of Origin:
- United States
- Department:
- Electrical
- Product Subgroup:
- Hammers & Wrenches
- Product Material:
- Aluminum
- Product Size:
- 17"
- Product Group:
- Hand Tools
- Product Weight:
- 2 lb
Ridgid 31365 – Frequently Asked Questions
1) Will a strap wrench turn chrome or polished pipe without scratching it?
That is exactly what the Ridgid Model 5 is for. A woven nylon strap grips the circumference instead of biting into it the way a pipe wrench's hardened jaw teeth do, so polished, plated, or coated pipe comes out unmarked. Use it on chrome trap arms, escutcheon nipples, and decorative or coated tube. If the pipe is black steel or galvanized and the finish does not matter, a straight pipe wrench gives you more torque.
2) Do I still need a pipe wrench if I have the Ridgid Model 5 strap wrench?
Usually yes, and most plumbers carry both. The Model 5 strap wrench is the finish tool: it turns polished, plated, and coated pipe up to 5 inches without marring. It does not deliver the bite or the leverage of a toothed pipe wrench on rusted or seized threaded steel. Typical kit is a strap wrench for the trim and visible work, a pipe wrench for the rough-in and the stubborn joints.
3) What are the strap dimensions on the Ridgid 31365, and can the strap be replaced?
The 31365 comes with a 17 inch by 1-3/4 inch woven nylon strap, treated with powdered rosin so it bites on slick polished pipe. Strap width matters as much as length: 1-3/4 inches spreads the load over a wider band, which is part of why it does not mar a finish. The strap is the wear item on any strap wrench, so when it glazes over or frays, order a replacement strap in the same 17 x 1-3/4 size rather than replacing the whole wrench.
4) Is the Ridgid Model 5 strap wrench body steel or aluminum, and how much does it weigh?
Aluminum body, 2 pounds. That is the trade-off to understand before you buy: it is a light tool to carry on a service truck and to hold overhead for repeated work, but the aluminum handle is not something to cheater-bar or hammer on. For heavy breakaway torque on threaded steel, reach for a pipe wrench.
5) What part number do I order for the Ridgid Model 5 aluminum strap wrench?
Order Ridgid catalog number 31365. In Ridgid's strap wrench lineup it is designated Model 5, which refers to the 5 inch capacity rating, not the strap length. Specifying both the 31365 number and the 17 x 1-3/4 inch strap configuration keeps you from being shipped a different-capacity model in the same family.
6) Is the Ridgid 31365 strap wrench made in the USA?
Yes. Country of origin on the Model 5 aluminum strap wrench is the United States, and Ridgid builds it using U.S. steel components. That matters on public work and institutional purchase orders that carry domestic-content language, so it is a line item worth keeping on file for government, school, and healthcare procurement.
7) Can a strap wrench be used on plastic pipe and fittings like PVC or PEX manifolds?
A nylon strap spreads grip over a wide band instead of concentrating it on jaw teeth, so it is the safer choice for turning finished or non-metallic round stock where you do not want crush marks, up to the Model 5's 5 inch capacity. Keep the strap clean and dry; the powdered rosin on it is what provides the grip, and oil or pipe dope on the surface will let it slip.
How fast can I get the Ridgid 31365 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ridgid 31365 come with a warranty?
Absolutely. The Ridgid 31365 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ridgid 31365?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ridgid 31365 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.