You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Hub Size:
- 3/4 Inch
- Outer Dimensions Inches:
- 9x5.31x4.25
- Outer Quantity:
- 10
- Product Group:
- Conduit & Raceway
- Standards:
- CSA
- Unspsc:
- 39131708 Electrical conduit fitting body
- Weight Uom:
- 43 lbs. per 100
- Department:
- Electrical
- Product Subgroup:
- Conduit Bodies & Covers
- Product Type:
- Type TB Conduit Body
- Product Details:
- Rigid Conduit
- Product Material:
- Cast Aluminum
Thomas & Betts CITBA-3/4 – Frequently Asked Questions
1) What size conduit does the Thomas & Betts CITBA-3/4 conduit body take?
The CITBA-3/4 is built for 3/4 inch rigid conduit. The hub size is 3/4 inch, so it threads onto 3/4 inch rigid or IMC runs. For any other trade size you need the matching hub size in the same CITB series, not an adapter on this body.
2) Is the CITBA-3/4 conduit body aluminum or steel, and can I use it outdoors?
Cast aluminum. That makes it a good match for exposed exterior and damp industrial runs where a steel body would rust at the threads, and it keeps the weight down on long overhead runs. Keep it off direct contact with dissimilar metals and out of soil or concrete contact, which is standard practice for aluminum fittings.
3) What is a Type TB conduit body used for instead of a T or an LB?
The CITBA-3/4 is a Type TB body. Like other conduit bodies it gives you a pulling and splicing access point in a rigid run; the letter designates the direction the openings face. An LB turns the run back into a wall, a T gives you a three-way branch. Pick the body whose opening layout matches the direction your run has to change, since the body cannot be reconfigured in the field.
4) Does the Thomas & Betts CITBA-3/4 come with a cover and gasket?
Order the cover and gasket separately unless your packing slip lists them. The CITBA-3/4 is the cast aluminum body itself; covers and gaskets for conduit bodies are normally a separate line item sized to the body.
5) Is the CITBA-3/4 conduit body approved for Canadian work?
It carries CSA, which is what an inspector on a Canadian job will look for on a cast fitting.
6) Where can I get the dimensional drawing for the Thomas & Betts CITBA-3/4?
Thomas & Betts publishes a spec sheet for the CITBA-3/4 with the body dimensions and cubic capacity, and it is linked from the product details. Pull that before you commit to a conduit body in a tight wall cavity, since body size drives both the opening you need and your allowable conductor fill.
How fast can I get the Thomas & Betts CITBA-3/4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts CITBA-3/4 come with a warranty?
Absolutely. The Thomas & Betts CITBA-3/4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts CITBA-3/4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts CITBA-3/4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.