You may also like
IDEAL Industries 85-379 CAT5e RJ-45 and Strain Relief Boots -15 pk
Model: IDL-85-379
CAT5e RJ-45 and Strain Relief Boots -15 pk
Features
Boots prevent broken connector tabs and snagging while extending connector life
8 position, 8 contact RJ-45 modular plug for Cat 5e, 100Ω balanced...
Ideal Industries
$68.15
$18.15
IDEAL Industries 85-367 CAT6 RJ-45 8P8C Single Piece Modular Plugs -25 pk
Model: IDL-85-367
CAT6 RJ-45 8P8C Single Piece Modular Plugs -25 pk
Features
Single-piece design to simplify assembly
Compatible with IDEAL 30-696, 30-496 and 33-396 Modular Plug Crimp Tools
Suitable for solid or...
Ideal Industries
$77.25
$27.25
IDEAL Industries 85-345 RJ-11(RJ-12) 6P6C Modular Plugs -25 pk
Model: IDL-85-345
RJ-11(RJ-12) 6P6C Modular Plugs -25 pk
Features
Three prong contact design for use with solid or stranded 24-26 AWG insulated copper conductors
Non feed through design to prevent external...
Ideal Industries
$63.75
$13.75
RJ-45 Snagless Strain Relief Boots -25 pk
Features
- Minimizes cable bends that can reduce data speed and result in data loss
- Dampens cable movement and vibrations that can result in premature connector failure
- Fits industry standard RJ-45 8P8C connectors
- Prevents broken connector tabs and snagging while extending connector life
- 1. Slide boot on the end of an unterminated Cat 5e/6 cable. At least one end of the cable needs to be unterminated.
- 2. Install and terminateRJ-45 connector per connector instructions.
- 4. Boots are reusable if cable is disassembled.
- 5.5mm diameter cable opening
- 3. Slide the boot over the back of connector so connector tab is partially covered by the hood dome of the boot.
- Sized for Cat 5e and smaller diameter Cat 6 twisted pair cables
Manufacturer Resources
Product Specs