You may also like
ROFU 20934 - 8600 Series 1/2" Spacer for 8512/8612 (Old 8011)
- Size: 1/2" Spacer
- Compatible With: 8512
Manufacturer Resources
Product Specs
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Spacer
- Subcategory:
- Parts and Accessories
- Commercial/Residential:
- Commercial
- Electronic:
- No
- Series:
- 8600 Series
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
ROFU 20934US28 – Frequently Asked Questions
1) What does the ROFU 20934 spacer do on an 8512 or 8612 magnetic lock installation?
The ROFU 20934 is a 1/2 inch spacer used with the 8512 and 8612. It shims the lock body out from the frame or header so the mag lock face lines up flat against the armature when the door closes. If the lock sits recessed relative to the armature and you are not getting full face contact, a spacer is the fix.
2) Is the ROFU 20934 the same part as the old ROFU 8011 spacer?
Yes. The 20934 is the current designation for what ROFU previously catalogued as the 8011 spacer in the 8600 Series line. If your drawings or an older order call out an 8011 half inch spacer for an 8512 or 8612, the 20934 is what replaces it.
3) How thick is the ROFU 20934 spacer, and can I stack them for more offset?
Each 20934 gives you 1/2 inch of offset. If the gap you need to close is deeper than that, order the quantity that adds up to the offset you need rather than looking for a single thicker piece, since this part is built at the one 1/2 inch thickness.
4) What is the difference between a mag lock spacer and a spacer mounting bracket?
A spacer like the ROFU 20934 is a solid 1/2 inch shim that sets the lock body off the frame to correct alignment with the armature. A spacer mounting bracket such as the BEA 10BODYMNT for the Bodyguard-T is a formed bracket that both spaces and provides the mounting interface for the device. Both are non-electronic accessories, so neither adds wiring to the opening, but they are not interchangeable between product families.
5) Does the ROFU 20934 spacer need to be wired or powered?
No wiring involved. The spacer is a mechanical mounting piece, non electronic, even though it is used as part of an electronic access control opening. All power and wiring stays with the 8512 or 8612 mag lock itself.
6) What finish does the ROFU 20934 spacer come in?
It is supplied as 20934US28, the US28 clear anodized aluminum finish, which matches the standard housing finish on ROFU mag lock hardware so the spacer does not stand out once the lock is mounted.
7) Is the ROFU 20934 spacer suitable for commercial openings, or is it a residential part?
It is a commercial rated accessory, intended for the same commercial door hardware applications as the 8512 and 8612 mag locks it mounts with. Typical use is exterior and interior access controlled doors in office, multi family, and institutional buildings.
How fast can I get the ROFU 20934US28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ROFU 20934US28 come with a warranty?
Absolutely. The ROFU 20934US28 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ROFU 20934US28?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ROFU 20934US28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.