Metallics M121200 Rope 1/2 x 1,200' Pull Rope 3-Stran

The Metallics M121200 is a 1/2 inch diameter, 3-strand pull rope supplied on a 1,200 foot length. One part number, one configuration, so there is nothing to specify beyond the model.

A 1/2 inch 3-strand rope like the M121200 is the heavy end of the range: it is what electricians reach for on large feeder pulls, bigger conduit runs, and anywhere the rope has to take real tension without stretching thin. For small raceway, a fish tape or flat mule tape is easier to feed and takes up less space in the pipe. Buy the rope when the pull load, not the conduit size, is the limiting factor.

It is a single catalogued item at 1,200 feet, not a cut-to-length product. Ordering the M121200 gets you the full 1,200 foot length of 1/2 inch 3-strand rope.

For most building feeder and branch runs, yes with room to spare. A 1,200 foot length of the M121200 covers long horizontal runs and tall risers in one piece, which matters because splicing a pull rope mid-run creates a knot that can hang up at a bend or a coupling.

The M121200 is rope only. You still need a means of getting it into the pipe (fish tape, a mouse and vacuum, or a blower with a pulling line) and a way to attach the conductors at the far end, typically a pulling grip or a basket, plus wire pulling lubricant on longer runs. None of that ships with the rope.