RXSW200A3CUL - Smart Switch 200 Amp Service Rated 120/240 1Ø NEMA 3R CUL Approved
Features
- The Smart A/C Module manages the loads by shedding the connected loads in the event of a drop in generator frequency (overload)
- Through the use of digital power technology, Generac's singe-phase service rated transfer switch has the ability to manage 4 individual HVAC loads with no additional hardware
- Gain even more flexibility when used in tandem with Smart Management Modules
- Smart Switch 200 Amp SE 1Ø (CUL)
- Single-phase, 120/240-volt; Cul listed transfer switch
- Designed for use with single-phase generators that utilize an Evolution or Nexus Controller
- Aluminum (indoor-outdoor) enclosure with electro-statically applied and baked power paint provides additional corrosion protection
Certifications and Standards
- UL Listed
Manufacturer Resources
Product Specs
- Amperage:
- 200 A
- Color Finish:
- grey
- Country Of Origin:
- United States
- Does This Product Have A Warranty :
- Yes
- Installation Hardware Included:
- transfer switch
- Installation Instructions Included:
- Yes
- Manufacturer Warranty:
- 5 year limited
- Maximum Generator Input:
- 22000 W
- Overall Depth:
- 6.3 in
- Overall Height:
- 30 in
- Overall Width:
- 13.5 in
- Restrictions:
- No
- Warranty Type:
- Limited - Parts and Labor
- Department:
- Electrical
- Product Group:
- Power Distribution
- Product Subgroup:
- Transfer Switch
- Product Voltage:
- 120 V
- Product Material:
- aluminum
- Product Weight:
- 40 lbs
Generac RXSW200A3CUL – Frequently Asked Questions
1) Will the Generac RXSW200A3CUL work as my main service disconnect, or do I still need a separate service panel?
The RXSW200A3CUL is a 200 amp service rated transfer switch, so it can serve as the service entrance disconnect ahead of the load center rather than sitting downstream of it. It is single phase, 120/240 volt, rated 200 A. Wiring it as service equipment is the reason it is offered in the service rated configuration.
2) Can this Generac transfer switch be mounted outside next to the meter?
Yes. The enclosure is NEMA 3R rated for indoor or outdoor mounting, built from aluminum with an electro-statically applied and baked powder paint for added corrosion protection, finished in grey. That makes an exterior wall next to the meter a normal location for it.
3) What size Generac generator can I connect to the RXSW200A3CUL smart switch?
Maximum generator input is 22,000 watts on a single phase, 120/240 volt system. It is built to pair with single-phase Generac generators running an Evolution or Nexus controller, so a home standby unit up to 22 kW is within the switch's rating.
4) Will this transfer switch run my air conditioning without adding load shed modules?
It manages up to four individual HVAC loads on its own through digital power technology, with no extra hardware needed. The built-in Smart A/C Module sheds connected loads if generator frequency drops under overload. If you need to shed additional non-HVAC circuits, Smart Management Modules can be added alongside it.
5) Is the Generac RXSW200A3CUL approved for installation in Canada?
It is a cUL listed transfer switch, which is the Canadian listing mark, and it is also UL Listed. That covers inspection on both sides of the border for this single-phase 120/240 volt service rated switch.
6) Will this work with a three-phase generator or a 208V commercial service?
No. The RXSW200A3CUL is single-phase only, 120/240 volt, and is intended for single-phase Generac generators with an Evolution or Nexus controller. A three-phase or 208V service needs a different switch entirely.
7) How much wall space do I need for the Generac RXSW200A3CUL enclosure?
Plan for a footprint of 30 inches high by 13.5 inches wide, projecting 6.3 inches off the wall. It weighs 40 pounds, so it is a one-person set on a solid wall but you want the mounting points into structure, not just siding.
8) What is the exact Generac part number to order this 200A service rated smart switch?
Order it as Generac RXSW200A3CUL. That is the manufacturer part number for the 200 amp service rated, 120/240 single-phase, NEMA 3R, cUL approved smart switch, and it is a single configuration with no finish or size options to specify.
9) Does the Generac 200 amp smart switch come with instructions and mounting hardware?
The transfer switch ships with its installation hardware and printed installation instructions. Conduit, wire, and the generator-side connections are job-supplied. Manufactured in the United States.
How fast can I get the Generac RXSW200A3CUL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Generac RXSW200A3CUL come with a warranty?
Absolutely. The Generac RXSW200A3CUL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Generac RXSW200A3CUL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Generac RXSW200A3CUL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.