Sargent 437C Conventional Keying Kit

SARGENT 437C CONVENTIONAL KEYING KIT OVERVIEW

Includes the brass pins, springs and tools needed to rekey SARGENT conventional, XC cylinders (Except SFIC) and interchangeable cores master keyed This heavy duty steel kit prevents pins from mixing The kit includes 100 each of top springs 13-0265,100 each 13-1769 springs used with standard drivers in the (10-) 6300 cores and 100 each of bottom and master/driver pins used in the following multi-family keyways: LA, RA, HA, CA, AA, BA, GA, KA, NA and VA

Note: When re-pinning SARGENT 6300 Large Format Interchangeable (Removable) Core cylinders use hollow drivers and springs in chambers 3 and 4 found in the 437 RC supplemental pinning kit.

Tools included with 437C kit are:

• Tweezers
• Bitting Gauge 435
• Loading Thimble (“Plug Holder” LT2)
• Loading Rod for 6, 8, 10, 11, mortise & rim cylinders, 13-1034
• Loading Rod for 480, 470, 460 and 6300 Cores, 13-1035
• Loading Rod Blades 13-1138 and 13-1037
• See Table on Page 24 for pins included

When pins are sold separately, they are packaged in easy to see and use foil & plastic packages in quantities of 100 per size

RESOURCES & DOWNLOADS

• SARGENT Construction Key System Installation Instructions
• SARGENT Cylinders and Components Catalog