Sargent 63-40 Series Large Format Standard Mortise Cylinder

SARGENT 63-40 SERIES LARGE FORMAT STANDARD MORTISE CYLINDER OVERVIEW

• SARGENT LFIC (Removable) cylinders and Master Key Systems make rekeying a door opening quick and easy Cores can be changed quickly without removing the lock from the door, for increased security
• Special “control” key is used to release a locking cam allowing immediate removal of the core
• Available for use in many SARGENT products (Exit Devices, Mortise locks, Bored locks and padlocks)
• LFIC Key Systems can also include conventional cylinders operated by the same Master/change keys when the quick change feature is not needed
• Can be master or grand-master keyed 2
• Change keys provided 6 pin standard
• 1 bitted available for field keying
• 1 bitted cylinders supplied with 2 key blanks, pins and springs in chambers in 3 and 4 only
• 1 bitted core control key (p/n 6255 CTL) to be ordered separately
• HA keyway will be supplied unless otherwise specified
• Wide variety of master key systems available
• Available in the following SARGENT keyway families: A, B, C, G, H, K, L, N, R, and V
• Also available in the following single key sections: CR and S

FEATURES

• Finishes*: 3, 4, 9, 15, 10, 10B, 10BE, 10BL, 20D, 32, 32D, BSP
• Cylinder: Solid brass 1-5/32" diameter
• Cap: Brass, bronze and stainless steel
• Optional Collars/Spacers available and ordered separately, refer to product catalogs for additional information
• Specify required Cam as a suffix: 63-42 x 32D x 101 cam
• For Standard Cam: No Suffix is required

RESOURCES & DOWNLOADS

• SARGENT Construction Key System Installation Instructions
• SARGENT Cylinders and Components Catalog