SATCO Lighting 67-101 Red LED Exit Sign, 90min Ni-Cad backup, 120/277V, Single/Dual Face, Universal Mounting

Yes, the 67-101 is a single or dual face sign, so the same unit can be configured to read from one side in a stairwell or from both sides where it hangs in a corridor or at an intersection of two paths of egress. Universal mounting means the same sign goes on the ceiling, the wall, or end mount off the wall, which is what lets a dual face unit hang perpendicular to traffic.

It does. The 67-101 carries an integral nickel cadmium battery that keeps the red LED legend illuminated for 90 minutes after utility power drops. Ninety minutes is the runtime egress lighting is normally specified to under life safety code, which is why it is the standard battery duration on commercial exit signage. Because the battery is built in, the sign does not need a central inverter or a generator circuit to remain lit.

The 67-101 is an exit sign only. It illuminates the EXIT legend on battery for 90 minutes but has no adjustable lamp heads, so it does not provide the path of egress illumination that a combination exit sign and emergency light unit gives you. If the corridor or stair also needs illuminated egress lighting, order a combo unit or a separate emergency light head alongside this sign.

Red. The 67-101 uses a red LED legend in a white housing. If your facility has standardized on green letters, or your local jurisdiction specifies green, this is not the sign to order. Most of the United States uses red, but a few jurisdictions call for green, so match whatever is already installed on the other openings in the building.

Placement is driven by your local egress code rather than the sign itself, but the 67-101 is built for the usual answer: single face units at each exit door and at turns where the path is obvious from one direction, dual face units hung out from the wall or dropped from the ceiling where the corridor is read from both ends. Because the same part number does single face, dual face, and all three mounting positions, you can order one item for a whole floor and configure each unit at install.