You may also like
SATCO Lighting S11211 4W, LED, 5000K, Clear, Candelabra Base, 120-130V
4 Watt - LED - 5000K - Clear - Candelabra base - 120-130 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.033-0.031A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- T4
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 480L
- Product Type:
- Miniature
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Plastic
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-130V
- Beam Spread Angle:
- 360
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4W
- Product Material:
- Plastic
- Product Weight:
- 0.02 lb
Satco Lighting S11211 – Frequently Asked Questions
1) Will the Satco S11211 LED candelabra bulb replace a 35W incandescent in my fixtures?
That's the direct swap it's built for. The S11211 draws 4 watts and is rated as a 35W incandescent equivalent, putting out 480 lumens. It uses a candelabra base and runs on 120-130 volts, so it drops into standard candelabra sockets on line voltage.
2) Can I use this Satco 4W LED candelabra lamp in a fully enclosed fixture?
Yes. The S11211 is an enclosed rated lamp, so sealed globes, jelly jars and closed ceiling fixtures are fine. It also carries a damp location rating, which covers covered porches, bathrooms and similar spots, but not direct exposure to weather.
3) Will a 5000K candelabra LED match the warm bulbs already in my chandeliers?
No, and this is the most common mis-order on this lamp. The S11211 is 5000K, a crisp daylight white, not the warm yellow of a standard incandescent candelabra bulb. It is not CCT selectable, so the color is fixed. If you're relamping a fixture that still has incandescent or 2700K lamps in it, mixing them will read badly. For a daylight-white look across a whole fixture or a whole floor, relamp all sockets at once.
4) Is this a clear bulb or frosted, and will the LED be visible through it?
Clear. The S11211 has a clear lens finish and is a lensed lamp in a T4 tube shape, so the emitter is visible through the glass the way a clear incandescent shows its filament. If you want diffused output for an exposed-socket chandelier, a frosted or milky lamp is the better look.
5) Can the Satco S11211 be installed base-up in a sconce or ceiling fixture?
Burning position is universal, so base-up, base-down or horizontal all work. Combined with the 360 degree beam spread, it throws light in every direction rather than in a cone, which suits chandeliers, sconces and open candelabra fixtures where the lamp is seen from all sides.
6) How long will these last before maintenance has to relamp again?
Rated life is 25,000 hours. On a common corridor or exterior fixture running roughly 12 hours a day, that's on the order of five to six years between relamps, which is why property managers standardize candelabra sockets on LED instead of incandescent.
7) Is the base on this Satco candelabra LED brass or plastic?
The base material is plastic. That's typical for a low-wattage LED lamp of this type and keeps weight down in delicate chandelier sockets, but it means you should hand-tighten only, not wrench it in.
8) Is the Satco S11211 a three-way bulb?
No. It's a single-level lamp, not three-way, so in a three-way socket it will run at one output only. It is dimmable, so if you want variable output use a dimmer rather than a three-way fixture.
How fast can I get the Satco Lighting S11211 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11211 come with a warranty?
Absolutely. The Satco Lighting S11211 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11211?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11211 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.